To avoid these ads, REGISTER NOW!

Show your new tool arrivals

R

rockinacummins

Well-known member
Joined
Oct 27, 2013
Messages
1,707
Location
Wapanucka, OK
kunkernator said:
Finally got my whole welder setup all done!
Inventory;

Klutch 220si Mig/TIG/Stick welder w/spoolgun
80CF 75/25 argon mix
40CF argon
Lotos LTP5000D plasma cutter
Klutch welding cart

Still waiting on a matching set of flowmeters for the bottles, along with a 3 way ball valve. That way it will be completely tool-less to switch gases for aluminum welding.

Just got the welder and the second bottle in today (both private owned tanks). I have to say this welder is top notch. I havent seen many reviews on the Klutch welders, so i may do an in-depth one.

And as required.... Pictures!!! I want to note in the last picture, i mounted the air fitting for the plasma cutter on a stiff part of the cart. It allows a much more "solid" surface to push and pull off of when connecting and disconnecting air, as opposed to the flimsy regulator mount.

18a664eb0b3384507050fe224a967215.jpg

de4b62172abbfd68cf72c2d891bc24a2.jpg

aaf2bb093c3ff99a61ec8dce1235484f.jpg

951337fdfc6f9661f80d5f82b9b3c01e.jpg

5dfa3cbfc1076ca36cf68dcf7f438e3d.jpg

4edad431a6dd3ab6ba030a09d224ad30.jpg

56dc2df4f9db4f2f17027427e0822de4.jpg


Sent from my iPhone using Tapatalk
Click to expand...

Interested in knowing how well you like it after you put it through the paces!
 
To avoid these ads, REGISTER NOW!
D

dalehsc

ALLIANCE MEMBER
Joined
Sep 7, 2013
Messages
227
Location
New Brunswick Canada
Bought in the last month:
Protective cover for my IR 2235 tmax

Plastic O-ring tools from SO

Gearwrench semi deep 1/4dr sockets

1/4 drive m12 milwaukee ratchet,battery & charger


The boot went on right away, the 7mm,8mm & 10mm of the semi deeps used already, the milwaukee is great for instrument panel/dash work.I'm a die hard DeWalt guy,but the don't make a cordless ratchet. The O-ring tools haven't been out of the package yet.
 
B

bensminibikes

Member
Joined
Apr 24, 2016
Messages
24
68e398ad09be27e88c81343c09cd1bac.jpg
They sockets I picked up today for $10 including the box. All of the sockets are either SK or Williams, with the exception of a husky breaker bar, and the craftsman universal socket.

Sent from my SAMSUNG-SM-G890A using Tapatalk
 
S

sam.coll

Well-known member
Joined
Oct 25, 2014
Messages
303
Location
Melbourne, Australia
New Festool CXS this week, really happy with the drill except for a slight wobble/run out so will be going back for an exchange.
 

Attachments

  • IMG_0605.jpg
    IMG_0605.jpg
    132.3 KB · Views: 139
M

mike528

Well-known member
Joined
Dec 20, 2014
Messages
503
Location
Shelby county Ohio
2D3387B3-76C5-4BF5-9BCB-74488F57D4C2_zpsioplvtf4.jpg
 
P

pescados666

Well-known member
Joined
Feb 16, 2014
Messages
142
Location
South Houston, Texas
https://scontent-dfw1-1.**.fbcdn.net/v/t34.0-12/13434290_1092081324182394_1703750186_n.jpg?oh=792acf83e7de0c405a3aa108ce122a31&oe=57615F9E
Bondhus 28 piece bit set was $8.50 and made in usa. A good upgrade from the china bits I had laying around in my box. The case it came in feels very nice too. The retaining ring in the socket adapters for them are a pain since they hold the bit too tightly for me to pull out with fingers, but surely that'll easy up after time.
 
A

ADSR

Well-known member
Joined
Jan 12, 2013
Messages
10,713
pescados666 said:
https://scontent-dfw1-1.**.fbcdn.net/v/t34.0-12/13434290_1092081324182394_1703750186_n.jpg?oh=792acf83e7de0c405a3aa108ce122a31&oe=57615F9E
Bondhus 28 piece bit set was $8.50 and made in usa. A good upgrade from the china bits I had laying around in my box. The case it came in feels very nice too. The retaining ring in the socket adapters for them are a pain since they hold the bit too tightly for me to pull out with fingers, but surely that'll easy up after time.
Click to expand...

Nice! where did you get it?
 
P

pescados666

Well-known member
Joined
Feb 16, 2014
Messages
142
Location
South Houston, Texas
LORDDiESEL said:
Nice! where did you get it?
Click to expand...

I got it from ebay http://www.ebay.com/itm/321994141783
Probably going to grab a bondhus hex key set too to replace my pittsburgh set I currently have. "All Bondhus® products are guaranteed for life. If you are not happy with a Bondhus® tool - for any reason - simply return it. A replacement will be shipped right out at no cost - no hassles, no questions asked!"
 
Last edited:
R

Ram Hemi

Well-known member
Joined
Dec 18, 2015
Messages
100
Location
Sudbury, Ontario
Picked up a brand new 2763-22 today on kijiji (Canada's CL) today for $300. Tool, 2 batteries, charger and case and original receipt for warranty. Have lighter duty cordless impact in my service truck (along with 40cfm compressor and air tools) but want a stronger one so I can take apart most things on our equipment when my service truck can't get close enough to use air impacts.

 
I

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
S

Sask dude

Well-known member
Joined
Sep 7, 2014
Messages
133
Location
Saskatoon Saskatchewan
pescados666 said:
I got it from ebay http://www.ebay.com/itm/321994141783
Probably going to grab a bondhus hex key set too to replace my pittsburgh set I currently have. "All Bondhus® products are guaranteed for life. If you are not happy with a Bondhus® tool - for any reason - simply return it. A replacement will be shipped right out at no cost - no hassles, no questions asked!"
Click to expand...

Holy **** 35 American 45 Canadian shipping to get that to me in Saskatchewan
Wow shipping can ruin a lot of potential purchases
 
I

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
Sask dude said:
Holy **** 35 American 45 Canadian shipping to get that to me in Saskatchewan
Wow shipping can ruin a lot of potential purchases
Click to expand...
Contact the seller and ask for an actual shipping cost. I'll bet they opted into the "eBay Global Shipping Program", which for me was the "International eBayers messaging me about my insane shipping cost" program. I don't use that anymore.
 
T

TK-421

Well-known member
Joined
Dec 29, 2015
Messages
1,398
Location
Pflugerville, TX
Finky198 said:
^^^^^

That belongs in the buying tools before you need them thread... Nice sets tho
Click to expand...

Well, unfortunately, I have neither the space, nor the knowledge, nor the faith in myself to work on my own cars currently, so I'm mainly buying tools for school this fall. However, I'm trying to kill two birds with one stone and buy tools that will not only get me through school, but also be of good enough quality that I can get a few years of daily mechanic use out of them. I figure it's cheaper in the long run to buy one set, as opposed to a school set and a work set. So me lacking a decent compressor isn't a big deal, hence why I bought sockets before the impact.

Hopefully within two years I can have enough skill and confidence in myself that I can work on my own stuff.
 
To avoid these ads, REGISTER NOW!
A

ADSR

Well-known member
Joined
Jan 12, 2013
Messages
10,713
ihateminimumwage said:
Contact the seller and ask for an actual shipping cost. I'll bet they opted into the "eBay Global Shipping Program", which for me was the "International eBayers messaging me about my insane shipping cost" program. I don't use that anymore.
Click to expand...

I took your advice. We'll see if it works.
 
I

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
LORDDiESEL said:
I took your advice. We'll see if it works.
Click to expand...
Post if it does.

I opted in a couple of times when they started offering it for sellers (ship local and they take care of the rest), and all I got was emails from folks outside of the US asking me what the hell I was thinking charging so much for shipping (same as above, $30-40+ for a $10 item).
 
S

SquareLJ

Well-known member
Joined
Mar 1, 2014
Messages
86
Got these from Toolup today. Couldn't resist the discount on them.



Got these last week. Wanted to use the SEP discount as much as I could while I had it.


 
K

kunkernator

Well-known member
Joined
Sep 27, 2012
Messages
2,438
Location
US of A
6409b064a5863f4cc144fd3701d70348.jpg

9cd166ccc3563551640ffb1d71ff5171.jpg

84d9b473352e56a1c9dce979d3426bce.jpg

Snap On 1/2" wobble impact socket set, 1/2" to 1-5/16" no skips.

Snap On 3/4" universal joint.

Alumabur carbide burr


Sent from my iPhone using Tapatalk
 
Z

zyx5432

Well-known member
Joined
Jan 27, 2013
Messages
133
Used a 20% off code on Zoro to get the 75th anniversary Wilton tradesman vise with bash hammer. Man this thing is huge vs my little Columbian.

 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom