d.mcfarland
Well-known member
First cornwell tools. Older 72 tooth design, not sure when they switched to 100 tooth but these look unused.
Those are fresh for sure!
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Those are fresh for sure!
Wamsutta
Well-known member
mjoekingz28
Well-known member
Decided to pick this up, last one he had on the truck
Sent from my SM-G925T using Tapatalk
Sweet piece. I notice it is too good to just display on the catalog and you had to put a blanket down for it. I like the colors, but why is the U worn in USA?
Jeepster425
Well-known member
OCD
Well-known member
Picked up a soldering torch,
USB charger for my 14.4 batteries,
Got a free portable usb charger,
USB charger for my 14.4 batteries,
Got a free portable usb charger,
1foxracing
Well-known member
https://www.amazon.com/gp/product/B00O1Q2HOQ/?tag=atomicindus08-20
Only had it in the drawer for 1 day but so far so good. The pictured King **** wrenches are fairly thin and much less weight then my Wright Grips. Here is the red version and if you scroll down to the reviews there is a photo where a user puts them in pairs with his SnapOn wrenches.
https://www.amazon.com/dp/B000OCHBCE/?tag=atomicindus08-20
"AmPro" ignition spark tester. I could have purchased a "Lisle" brand for three dollars more, but since it appeared to be the exact same product, I saw no point..
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited:
Moose-LandTran
Well-known member
Congratulations!. I went looking for one last year to turn into a weekender and was caught off guard by what they run..........even used.
Thanks!
We have loads of them here in Europe so they're not so expensive. This was at the higher end of the scale because it only has 62k, 1 owner and just under 3 years old, it's immaculate inside and out. Not a particularly high spec, much less than my outgoing crafter, but it will suit my need perfectly.
It has a resin-coated ply floor and ply lining, might add raving for strapping cargo like my old van has and replace the floor and wheelboxes with ally chequer plate.
That stuff is scary expensive!
Seriously though Moose-LandTran, your Benz is sweet!
Thanks!
No, i'm going back into working in express freight.
upgrading
Well-known member
Flextastic !These I'm excited about. Locking flex stubbies from Napa.
Are they made in Taiwan ?
Yes. 72 tooth. These things are awesome. I've been bummed ever since I grenaded my Mac micro tough and couldnt find a rebuild kit.
Napa's description is off though online, it says the (LFS) is a non locking flex. LFS is locking, they do have a NLFS which is...you guessed it. Non locking flex.
Better picture to show the size
Last edited:
6MocoA
Banned
These I'm excited about. Locking flex stubbies from Napa.
Those look awesome. May think about picking up a pair myself.
Just bought a set of Wera insulated screwdrivers from Amazon. The strange thing is that one of the screwdrivers is a kind of forest green color instead of the red of the others. The stranger thing is that it's not a color that Wera appears to sell. My guess is that it's a custom color they created for some corporation, but I'm checking with Wera just to make sure it isn't a counterfeit that's going to explode if it comes into contact with live voltage. 
Attachments
Last edited:
OCD
Well-known member
Just bought a set of Wera insulated screwdrivers from Amazon. The strange thing is that one of the screwdrivers is a kind of forest green color instead of the red of the others. The stranger thing is that it's not a color that Wera appears to sell. My guess is that it's a custom color they created for some corporation, but I'm checking with Wera just to make sure it isn't a counterfeit that's going to explode if it comes into contact with live voltage.
All good!!
It's green because that is the color of Robertson #1 (square)... Have the same one in my set!!
Robertson #0 Yellow, #1 Green, #2 Red, and #3 Black...
FOCUS.FREAK
Well-known member
Yes. 72 tooth. These things are awesome. I've been bummed ever since I grenaded my Mac micro tough and couldnt find a rebuild kit.
Napa's description is off though online, it says the (LFS) is a non locking flex. LFS is locking, they do have a NLFS which is...you guessed it. Non locking flex.
Better picture to show the size
I wish it was a lever for locking and unlocking. I have the soft grip 3/8 locking. Received it when my original 3/8 non locking messed up.
Sent from my iPhone using Tapatalk
Pantsfall_McFixit
Well-known member
- Joined
- Oct 8, 2012
- Messages
- 167
Witte 670090 Protop II Impact screwdriver set from CrawfordTool
Yes. 72 tooth. These things are awesome. I've been bummed ever since I grenaded my Mac micro tough and couldnt find a rebuild kit.
Napa's description is off though online, it says the (LFS) is a non locking flex. LFS is locking, they do have a NLFS which is...you guessed it. Non locking flex.
Better picture to show the size
How much are each of those?
Sent from my iPhone using Tapatalk
38 and 50 plus tax
Rossco
Well-known member
Sprinters. Starting to see more and more over here.
The old 5 banger diesels where licence losers.
The old 5 banger diesels where licence losers.
ilovevocs
Well-known member
These I'm excited about. Locking flex stubbies from Napa.
Have you used them? The head looks long for a stubby? I use my flex stubby allot for powersports work and love it. It's a craftsman I have had for over 19 years.
Sent from my iPhone using Tapatalk
KnurledNut
Well-known member
I wanted a set of twist sockets but couldnt justify the price the tool trucks were asking. They are expensive.
As some know, these are made by AJ Manufacturing and rebadged for Snap-on, Mac, Matco, etc.
I came across the same ones for $31 shipped on Amazon.
(Currently at $38 and likely to increase if others purchase. https://www.amazon.com/gp/product/B00I6A6ZGE/?tag=atomicindus08-20)
These are rebadged for Urrea.
As some know, these are made by AJ Manufacturing and rebadged for Snap-on, Mac, Matco, etc.
I came across the same ones for $31 shipped on Amazon.
(Currently at $38 and likely to increase if others purchase. https://www.amazon.com/gp/product/B00I6A6ZGE/?tag=atomicindus08-20)
These are rebadged for Urrea.
I'll take a pic against works non locking craftsman stubby, OAL of this Napa one is pretty short. I bought a non flex stubby Napa a week ago and it's bigger/longer than the flex version.
Cman, Carlyle 60th sealed stubby, Carlyle 3/8 72th, Carlyle 1/4 72th.
Last edited:
jfcasey
Well-known member
Those look just like the sk and snap on sets that are 3x the money. Thanks for the link I just ordered a set!
FOCUS.FREAK
Well-known member
My order came in for my SP 1/4 Air impacting ratchet.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Currently unavailable. That didn't take long. Lol....
Jarhead0408
Well-known member
I think I got the last one.
I added it to my cart at the $40 price. When I reopened the item in a separate window it showed $148.**. I quickly double checked to make sure the original price remained in my cart. When I saw that it had, I went ahead and ordered it.
Anotherrcguy
Well-known member
First cornwell tools. Older 72 tooth design, not sure when they switched to 100 tooth but these look unused.
I have lots of ratchets including this same set and they are my go to ratchets. Love them!
dkroth
Well-known member
Recent additions. I'm addicted to ratchets.....
One of these is not like the others.
Class, can you tell me which one doesn't belong?
16again
Well-known member
Xicaque
Well-known member
You might be on the right course ^^^^^
davethorik
Well-known member
upgrading
Well-known member
Some huge excellence there.
Jim Johnstone
Well-known member
Just picked up this porter cable 6910lr router with 2 still use able bits for $40 off kijiji.