Show your new tool arrivals

[Fedwrench]

Just a few things. Since KC Tool is offering a giveaway on the Journal, I picked up a few things from their website to try out. A Felo offset handle bit ratchet, a Felo 1/4 drive metric socket set, a wooden handled P2 screwdriver, and a red/black Felo smart handle. I think the smart handle is pretty cool. It takes any 1/4 hex bit. It also has a metal center section that when pressed forward and down, pivots to make a tee handle.
Also pictured next to a quarter, is a tiny Carlyle 1/4 drive quick release flex head ratchet measuring 3.5 inches long overall.

 

[MattVette89]

Fed - what's the pn on that Carlyle ratchet?

 

[Fedwrench]

Fed - what's the pn on that Carlyle ratchet?

R14NLFS

they also have a locking head version too.

 

[MattVette89]

R14NLFS

they also have a locking head version too.

Thanks. I was looking at a similar one on the Matco truck for $75

https://www.matcotools.com/catalog/product/BF472T/3-8-DR-72T-MINI-FLEX-RATCHET/

 

[noid]

This ones pretty rare.

Its a spring compressor bar for flatheads. It also works wonders for levering between knuckles and balljoints with less risk of ruining the boot.

Air hammer with hammer bit or special tool preferred of course for clean balljoint seperation.

 

[Project_shadow]

 

[vintage nut]

Calling the freight company again today, still trying to get it up here.
This will be a fun toy.

Sent from my X13 using Tapatalk

 

[1foxracing]

From last week.

3/8 flex stubby

 

[ocloc24]

From last week.

3/8 flex stubby

Are those teeth in the flats of the six point box end of the wrenches? I can't tell.

Sent from my SM-G930P using Tapatalk

 

[1foxracing]

^ Yes they have teeth cut into the ratcheting box end.

 

[Grunt06]

I was looking for a socket set for my truck and through research found this set. It hit every requirements I had mainly American made and full range of sizes needed for typical repairs (had to be metric for my 4Runner). The bonus was the metal box which would have been an upgrade on any other set. It was budget friendly to top it off. I added the thumb wheel ratchet which I’m glad I did because I didn’t know I’ve been missing that all these years.

I was a bit worried as there are a lot of mixed reviews of SK out there but I must say I’m a fan and plan to purchase more of their products in the future as I add to and upgrade tools.




Sent from my iPhone using Tapatalk

 

[-OSIS-]

Looks sick man. I debated but ended up with a Milwaukee instead.

 

[Project_shadow]

Looks sick man. I debated but ended up with a Milwaukee instead.

I looked at both pretty hard, but this had a few more cubic inches and it's all black lol

 

[cliftonbros89]

Pretty good haul last week!

Wera insulated set, Mityvac extractor (I plan to buy the bigger one soon), from Amazon. Norseman numbered and lettered drill bit sets, and C.S. Osborne transfer punch set from HJE.


Bonney flarenut wrench set, missing a few but got it for $35 so I couldn't pass it up.


Snap On 11/16" flare nut wrench (matches my Martin set I have), St. Louis Pneumatic cut-off thru Home Depot, Martin 3/8" SAE crowfoot set


1/2" Bonney to go with the above set


Socket of the month from SK Club


Sunex metric 60 degree offset wrench set from my Matco guy. Gearwrench 3/8" metric swivel socket set. Both are for the work service truck. Cheaper route for now.

 

[zendigital]

Have you tried the caliper kit yet? How is it? I’ve never seen a kit like that but it looks like it would be an awesome kit to have

It's pretty nice, cuts the time down significantly. Even has a head for pressing in pistons but it works better as a winder.

 

[BB70Chevelle]

My new arrivals today, m12 fuel impact with two 2.0 batteries and a m12 spotlight.

 

[radio2000]

I was looking for a socket set for my truck and through research found this set. It hit every requirements I had mainly American made and full range of sizes needed for typical repairs (had to be metric for my 4Runner). The bonus was the metal box which would have been an upgrade on any other set. It was budget friendly to top it off. I added the thumb wheel ratchet which I’m glad I did because I didn’t know I’ve been missing that all these years.

I was a bit worried as there are a lot of mixed reviews of SK out there but I must say I’m a fan and plan to purchase more of their products in the future as I add to and upgrade tools.




Sent from my iPhone using Tapatalk

What's the part # on that. Think I'd like that in std


Sent from my iPhone using Tapatalk

 

[radio2000]

love it
I bought the yellow Dewalt model they had on sale. Wishing now I would've easier and got the black husky.


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[Grunt06]

What's the part # on that. Think I'd like that in std


Sent from my iPhone using Tapatalk

Got it off Amazon it’s not on their site, I think because it’s new old stock but can’t confirm. Here is the SAE listing title.

SK Hand Tool 94515 15Piece Full Range 3/8” SAE - Metal Box,


Sent from my iPhone using Tapatalk

 

[radio2000]

Got it off Amazon it’s not on their site, I think because it’s new old stock but can’t confirm. Here is the SAE listing title.

SK Hand Tool 94515 15Piece Full Range 3/8” SAE - Metal Box,


Sent from my iPhone using Tapatalk

thanks man!

 

[LXCam]

Well here my most recent procurement. A NOS now defunct Armstrong feed thru ratchet set.




Now for the fun part of the back story. Many years ago I bought the matching socket head set from graingers and at the time wasn't aware the ratchet didn't come with the set, were talking maybe 15-20 years ago?! Well now I finally got a ratchet yo go with that set

 

[Strouty]

Well here my most recent procurement. A NOS now defunct Armstrong feed thru ratchet set.

Are those spark plug sockets or are they the extensions?

 

[LXCam]

Are those spark plug sockets or are they the extensions?

Extensions.

 

[Strouty]

The extensions are the only things I need. They come up on eBay from time to time with reasonable prices. Mine are in a metal case. I had them long before decent ratcheting wrenches were readily available. I also have the 1/2" drive set.

 

[hangfirew8]

Steelman Pro spark plug boot cutters. If the boots tear off the spark plugs that are installed deep in the head, it can be a pain to pick out the remains enough to get a socket on the plug. This should grind the boot down quick. They feel like high quality including the case. Can't wait to try on a 3.5L Ecoboost with over 100,000 miles on the original plugs.

So, I see Ford is still driving the market for problem solving spark plug tools.

 

[Unruh]

New set of screwdrivers. I almost got the pliers set too. Really tempting.

 

[93cummins]

Picked up some drill hog USA drill bit set and step drill I already have a few other step drills from them and there left hand drill set and I’m impressed with what I have so I bought some more


Sent from my iPhone using Tapatalk

 

[VinceG]

Pink Snap-On pliers

 

[ocloc24]

Pink Snap-On pliers

Is there any way to order those specifically? The part # is the same and I don't see them online. My dealer never has them, I want to get some for my girlfriend.

Sent from my SM-G930P using Tapatalk

 

[VinceG]

I got A Matco MaxMe subscription based scan tool. cant wait to use it some

 

[canuckian]

Is there any way to order those specifically? The part # is the same and I don't see them online. My dealer never has them, I want to get some for my girlfriend.


Sent from my SM-G930P using Tapatalk

PL306ACFP

https://store.snapon.com/Pliers-3-pc-Pliers-Set-P893079.aspx

 

[one9gt]

Is there any way to order those specifically? The part # is the same and I don't see them online. My dealer never has them, I want to get some for my girlfriend.

Sent from my SM-G930P using Tapatalk

I think they were part of the breast cancer monthly flyer..



Sent from my iPhone using Tapatalk

 

[Strouty]

Lista goodness.

 

[zmotorsports]

Lista goodness.

DAMN!!!!

That is sweeeeeet.

I would love to have that in my shop.

 

[LXCam]

Damn strouty and I thought my 5ft wide 600lb rated 4 pull out shelf unit was pretty cool.

You win

Are those shelves 250 or 400lb rated?

 

[VinceG]

Is there any way to order those specifically? The part # is the same and I don't see them online. My dealer never has them, I want to get some for my girlfriend.

Sent from my SM-G930P using Tapatalk

part # pl306ACFP

 

[Strouty]

They are 400, but it is only a 47” wide cabinet. I was just going to buy some of the pull out trays, but the cabinet was cheaper than buying 5 of them, including shipping.

 

[Pipe_guy]

Screwdriver for home and picks for work.

Sent from my SM-G950W using Tapatalk

 

[WhiffySpark]

I got A Matco MaxMe subscription based scan tool. cant wait to use it some

I just brought one of those for the house. $500 cash off the truck. I wouldn’t use it in a shop but it seems fine for home so far

 

[Project_shadow]

Snap on had these in the used trade ins bin on the truck, 30$ cash
Looks like they haven't been cared for, so ill redress them at work tonight and see how they do