Show your new tool arrivals

[Negen]

Money back already not too bad.

Paypal can be difficult in disputes

Got yet another set of wire stripers. Kline k12035. These I believe are what channellock is trying to compete with with their new stripers that I posted a few days back. These are the 2020 versions only difference that I can tell us the grips. The 2018 ones are solid blue and harder almost plastic like. These are more rubber like. The biggest downfall of these is the lack of lock. Spring loaded pliers should always have a lock. There is plenty of room left for one too.

Sent from my ONEPLUS A6013 using The Garage Journal mobile app




Edit:
These are almost worth it 25-29$ retail prices.
The channel locks are 35-45$ retail.
The channel locks came brand new ordered from channellock website with rust spots. Some kinda annoying to the point I had to fix.

The channel locks seem to strip better.
The Kline's have better pliers.
The channel locks pliers are good too just not as beefy so options for those who may need a little more than stamped but not as much as the Kline's.

 

[vertguy]

Replacement blades for an older snap off blade knife along with a vintage Stanley 10-049 with some NOS blades. Should be set for a while with both.




Sent from my iPad using Garage Journal

 

[jeffmoss26]

the Klein with the crimper are way better IMO
just got this today.

 

[PelicanPines]

Jeff... I'm growing concerned. You are not acquiring ANY tools lately... that I want. The tumbler is up there tho... I could use one. No worries tho... YOU are saving me money.

Thank You
Pines

 

[javyLSU]

My 100th Anniversary set FINALLY came in!

 

[jeffmoss26]

I thought the 100th anniversary color was dark gray?

 

[javyLSU]

I thought the 100th anniversary color was dark gray?

Correct, I swapped out the handles for my beloved green. That grey was far too boring for my toolbox...

 

[Gummi Bear]

I hit up an estate sale the other day.

Everything was 50¢ up to $2

Got a bunch of old USA made stuff: SK, Williams, Proto, Indestro, Craftsman







I went to the woods because I wished to live deliberately...

Henry David Thoreau

 

[loganb]

New to me matching set of Delta 17" bandsaw, 8" jointer and 15" planer!

Sent from The Garage Journal mobile app

 

[speed88]

A few new goody’s

 

[jrbpit1]

My 6 ton ‘Murcia stands got here today from US Jack. Looking forward to use them this weekend. They are a little more than the Harbor Freight widow makers.


Sent from my iPhone using The Garage Journal mobile app

 

[Bigblockyeti]

New to me matching set of Delta 17" bandsaw, 8" jointer and 15" planer!

Sent from The Garage Journal mobile app

That's a heck of a combo! You're going to love that DJ-20, the 8" width I've found to be very helpful. I'm looking for a 15" planer like yours, a 16" - 18" would be nice but they start taking up a lot of real estate any bigger than 15".

 

[CoogarXR]

It's been slim-pickins on Xcelite hoarding lately, so I broadened out to include Vaco tools too, lol. Here's an adorable little Vaco adjustable wrench. It's still like new!

 

[loganb]

That's a heck of a combo! You're going to love that DJ-20, the 8" width I've found to be very helpful. I'm looking for a 15" planer like yours, a 16" - 18" would be nice but they start taking up a lot of real estate any bigger than 15".

I'm super excited for the combo....took most of a day to get them home as it was 3 trips but well worth it. Now to finish up wiring my subpanel so I can get them turned on!

 

[M6erfan]

Some new MC tire changing tools from RMATV. Came in this morning and put them to use this afternoon...

 

[jeffmoss26]

Jeff... I'm growing concerned. You are not acquiring ANY tools lately... that I want. The tumbler is up there tho... I could use one. No worries tho... YOU are saving me money.

Thank You
Pines

what about these Wera drivers? or the pink Megapro screwdriver I got my mom?

 

[Negen]

What wera drivers?

what about these Wera drivers? or the pink Megapro screwdriver I got my mom?

Sent from my ONEPLUS A6013 using The Garage Journal mobile app

 

[PelicanPines]

what about these Wera drivers? or the pink Megapro screwdriver I got my mom?

I have the complete set with a few duplicates of those Wiha drivers. I don't do pink but If it comes in a different color... I will look at that.

I stopped saving money... I just purchased a new Klein Breaker outlet transceiver thing... won't arrive till next Wednesday.

It was just so odd... everything you purchased... I wanted... then the supply dried up.

 

[jeffmoss26]

Dammit. Wiha!

 

[ThePostman]

I took advantage of a Zoro coupon and grabbed this Proto J5250HTCF. It's a nice tool for the money.

You sir, that was a good coupon. Tell us about this ratchet please. And give us some better pics than the **** stanley does. This is my latest tool crush.

Perhaps chime in on this thread:
https://www.garagejournal.com/forum/showthread.php?t=465322

 

[old_smokey]

Some new MC tire changing tools from RMATV. Came in this morning and put them to use this afternoon...

Nice tools! What kind of bike are you working on?


Sent from my iPhone using Tapatalk

 

[M6erfan]

Nice tools! What kind of bike are you working on?

My '81 Yamaha IT175. I pinched the front tube on a ride last week and my old spoons were getting long in the tooth, the business ends were a bit chipped up. So I sprang for the $20 on a new set and added the bead buddy.

 

[PelicanPines]

Dammit. Wiha!

I knew what you meant... LMAO

We share the same fat finger Autocorrect

 

[old_smokey]

My '81 Yamaha IT175. I pinched the front tube on a ride last week and my old spoons were getting long in the tooth, the business ends were a bit chipped up. So I sprang for the $20 on a new set and added the bead buddy.

Very cool, I had that same bike once! Now I’m riding a 77 XT500 I restored.

Back to the topic at hand, picked up a nice SK Tuff1 long handled 3/8 ratchet.




Sent from my iPhone using Tapatalk

 

[beefcake]

Makita DTW700 1/2 impact

 

[speed88]

Makita DTW700 1/2 impact

Been really interested in getting this gun. How are you liking it?

 

[beefcake]

Been really interested in getting this gun. How are you liking it?

I haven't used it to much yet, but I like so far.

 

[X1 Mike]

I'm a big collector of Snap On orange Hard handles and have quite the collection of various orange ratcheting screwdrivers. Well S-O came out with the new tan and green screwdrivers with the black shafts. I asked if there was a separate part number for just the shaft and they couldn't find one.



What to do? [emoji782]



Best thing is I didn't have to buy both, my Snap On guy just said to bring the tan one back with the chrome shaft and I pay for the orange one only.

Now I have a one of one custom Orange and Black ratcheting screwdriver.

 

[jeffmoss26]

I still want the tan handle lol

 

[X1 Mike]

I still want the tan handle lol

Haha I actually had him holding it for me and finally just asked if he would let me swap and he was good to go.

I do kinda like the tan though. haha

 

[Cgw1984]

Haha I actually had him holding it for me and finally just asked if he would let me swap and he was good to go.

I do kinda like the tan though. haha

Perfect time of year for an orange and black screwdriver! Halloween

 

[dirtbiker109d]

Love this thread

 

[JP Chestnut]

Makita DTW700 1/2 impact

What battery size is that? The tool looks like it dwarfs it.

 

[beefcake]

What battery size is that? The tool looks like it dwarfs it.

It is only a 2ah.

 

[OCD]

My 100th Anniversary set FINALLY came in!

Beauties!!

 

[BlueBomb]

Snagged the lot on marketplace for $80. The 24" is missing its cap so need to call Snap On and see if they have it. Couldn't find a replacement on the site.

Sent from my SM-N960U using Tapatalk

 

[jeffmoss26]

Snagged the lot on marketplace for $80. The 24" is missing its cap so need to call Snap On and see if they have it. Couldn't find a replacement on the site.

Sent from my SM-N960U using Tapatalk

Try SSDMR4A200RO

 

[BlueBomb]

Try SSDMR4A200RO

Thank you. Jeff.

Sent from my SM-N960U using Tapatalk

 

[X1 Mike]

Try SSDMR4A200RO

Got any idea where to find the shaft? A 24" would really round out my collection nicely.

 

[L31f78]

Hit a gold mine at a pawn shop that was going out of business.