Show your new tool arrivals

[iSpark]

Very jealous of your acquisition. If you don't already have one, you should get an augur bit file to keep those puppies sharp.

Thanks

yep, it's on my list.

 

[iSpark]

Does this count?

Indeed it does.
Looks like mine.

 

[48548]

I have this one and like it....



Sent from my SM-N975U using Tapatalk

That looks good, is that a fold out handle for stability during use? Do you happen to have a part number? Thanks[/QUOTE]Yes the handle folds and and can twist and lock for different angles...

https://www.amazon.com/dp/B000BYEJ02/?tag=atomicindus08-20

Sent from my SM-N975U using Tapatalk

 

[Deadsquiggles]

My copper welding spoon with 3 different heads came in today. Also should have a magnetic copper plug weld tool and oil filter cutter being delivered today.

 

[designer485]

Ernst socket rail to use as a wrench rack. Works perfectly.

 

[M635_Guy]

The Gen 2 Arrived

Gen 2 vs. Gen 1

M12 Stubby vs. Gen 2 vs. Gen 1 with 6.0Ah batteries

 

[SuzukiGS750EZ]

Delete

 

[gtsgarage]

Ernst socket rail to use as a wrench rack. Works perfectly.

Slick, I have some of them didn’t love them with sockets. This might be a good use.

 

[Qualitytools]

That looks good, is that a fold out handle for stability during use? Do you happen to have a part number? Thanks

Yes the handle folds and and can twist and lock for different angles...

https://www.amazon.com/dp/B000BYEJ02/?tag=atomicindus08-20

Sent from my SM-N975U using Tapatalk[/QUOTE]

Thank You!

 

[upgrading]

The Gedore's look nice and handy in that Ernst

 

[PelicanPines]

Needed these ASAP... both charged and ready to go into service this week.

 

[LG63]

Got this CT-630 mini torch in today. I have to say, this thing is super nice. The plastic is glass fiber reinforced and it has a great feel and heft. The bottle unscrews from the top. It's nicer than my Portasol. Pull the trigger and hold for instant heat, or pull the lock with your thumb for constant.
Found it on Amazon and there's an instant $5 off coupon taking it down to $35.

Looks like a nice torch. I just now ordered the multi-tip version.

 

[IMStuner]

12x1x24 fixture plate




Sent from my iPhone using Garage Journal

 

[16again]

3 pounder.



Sent from my iPhone using Garage Journal

 

[sweet victory]

Just a few recent things:

My SO dealer had this very lightly used trade in for $150. I was about to pull the trigger on a 1/4" torque wrench, but this will work great for what I need. Normally $395!



A couple more magnetic battery boots. Always grab some when you can...always on back order!



Lowes had the 2 pack on sale for $10. Couldn't pass it up since the next cheapest option is a 3 Pack from EZ Red for $25.



Another Magrail from the SO truck. I have a small fortune invested in these things by now...wanted a dedicated rail for all my adapters, swivels, etc.

 

[Bighead38]

Needed a stapler.

Needed a pry tool for plastic panels. I asked my buddy who owns a car audio shop suggested this one. It is a hefty chunk of metal. https://12vtools.com/product/ultimate-pry-tool/

20201121_172217 by Jon S, on Flickr

I wish my Milwaukee tools were that color. Why isn’t the stapler red?


Hey sweet is the 1/4” in inch pounds? If so I have the same one and it’s great.

 

[jonshonda]

I wish my Milwaukee tools were that color. Why isn’t the stapler red?

I turned the saturation down to zero in the picture just to mess with people, but agree it would look good in grey!

The box of staples next to it should be yellow if that helps.

 

[IMStuner]

Ups just dropped off my Everlast 210EXT


Sent from my iPhone using Garage Journal

 

[48548]

Look what showed up...

Sent from my SM-N975U using Tapatalk

 

[Ign]

From Amazon. I put this purchase off too long. Dynamic 3/8" Drive 10 Piece Metric, Flare Nut Socket Set, 10mm -19mm

Just got these myself because of this thread. Got both fractional and metric. Ordered straight from Dynamic which comes with a return address of Gray Tools Canada

 

[gtsgarage]

Look what showed up...

Sent from my SM-N975U using Tapatalk

That charger looks awesome!

 

[javyLSU]

My first pair of Knipex... necessitated by the stupid ear clamps on CV boots and inner tie rods. Got lucky and caught these in “used - good condition” on Amazon for $17. Every time I’ve ever bought anything listed in this condition it’s arrived in brand new condition, sometimes with an open box. Sure enough, these are brand new. I’ve never bought a pair of pliers that came in a plastic wrapper, inside a box LOL


Other pickup was the new “flank jaw” pliers with the hex grip built into the jaws. This is one of those tools that I never in a million years I thought I would need but I have used the SNOT out of these things since I got them last week. Already one of my favorite pair of pliers:

 

[Deadsquiggles]

Gearwrench SAE Reversible ratchet wrenches, Klutch chrome SAE & Metric 3/8” dr swivel sockets, HF 3/8” & 1/2” dr SAE impact swivel sockets, Miller Metalworker gloves, and Tekton 25-250 ft-lb 1/2” dr torque wrench

 

[16again]

Arrived this evening. Oh man, love this thing. Never using a manual stapler again.


Sent from my iPhone using Garage Journal

 

[X1 Mike]

Picked up a used set of 3 hard handled Snap-On feeler gauges. I had planned on making my own in the sizes I need but I didn’t realize that the blades were riveted and not screwed in. Now I’ll have to possibly drill out the rivets and tap one side.




Sent from my iPhone using Garage Journal

 

[bsaint]

Picked up a used set of 3 hard handled Snap-On feeler gauges. I had planned on making my own in the sizes I need but I didn’t realize that the blades were riveted and not screwed in. Now I’ll have to possibly drill out the rivets and tap one side.




Sent from my iPhone using Garage Journal

Snapon gotchya


Sent from my iPhone using Tapatalk

 

[Dennis Leigh Henry]

Picked up the Klein's new..

View media item 108160
Picked up the spotters at and estate sale..

View media item 108159
View media item 108158

 

[old_smokey]

Picked up the Klein's new..

View media item 108160
Picked up the spotters at and estate sale..

View media item 108159
View media item 108158

What are those spotters used for?


Sent from my iPhone using Tapatalk

 

[Dennis Leigh Henry]

Transfer of a hole pattern from a device (tool element, die element, cylinder head, etc.) to a workpiece (bracket, die shoe, etc.).. also called transfer screws, transfer dowels, transfer punch (not shown).. Here is a YouTube that should help...

 

[JBH]

Picked up the Klein's new..

View media item 108160

Are those standard 4mm bits?

 

[Dennis Leigh Henry]

Are those standard 4mm bits?

I measured the shank at .137" / 3.47mm

 

[menkarran]

I'll be ordering one of those cutters as well. It'd come in handy at work. Especially now that I've been sitting at home all day...even my work is being monitored by software Worktime, not a person. I hope that some hard work will at least keep me from going crazy in this lockdown.

 

[X1 Mike]

Snapon gotchya


Sent from my iPhone using Tapatalk

Not even close, I was planning on making it how I wanted, this just gives me a chance to make it more "One off."

 

[javyLSU]

...my work is being monitored by software Worktime, not a person...

Out of curiosity I took a look at that software. Wow, that looks horrendous. Talk about big brother...

"Hey John, I noticed you had multiple 15 minute idle periods on Tuesday, August 3rd. Can you explain that?"

Yikes.

 

[NUTTSGT]

13 piece Masterforce hole saw kit.

 

[bsaint]

Not even close, I was planning on making it how I wanted, this just gives me a chance to make it more "One off."

Im just kidding. Im up to 5g since summer on the snap on trucj just in tools.


Sent from my iPhone using Tapatalk

 

[zmotorsports]

Picked up the spotters at and estate sale..

View media item 108159
View media item 108158

VERY nice.

I've been looking for a full set of those myself but don't see them too often in used/good condition.

 

[iSpark]

Have been wanting one of these for a few years now. Finally got one! lol
Any guesses?
That's a washing machine it's sitting on.

 

[iSpark]

Okay Okay
I'll end the suspense!
It's way heavier than I was expecting, should make cutting pretty easy.
I also have a SWAG table with foot switch coming Friday.

 

[ChefRex]

Have been wanting one of these for a few years now. Finally got one! lol
Any guesses?
That's a washing machine it's sitting on.

Could it be a PortaBand?