Maxcustody
Well-known member
Yes they are, only ones I have used for years.
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Yes they are, only ones I have used for years.
Maxcustody
Well-known member
The HF zip ties work fine, I have used them for years……..
If you want to use them to hold a bumper on I suggest using a different method
If you want to use them to hold a bumper on I suggest using a different method
milkovich
Well-known member
New motor for the router table 
Qualitytools
Well-known member
Nice, as well as the BMW bike near it. Enjoy
Renegade1LI
Well-known member
Thanks! That is my wife's bike, she loves it.
KnurledNut
Well-known member
(1:28pm edit: added more pics)
I don’t like them ripping off Knipex designs, but don’t mind a little healthy competition for Snap-on.
I was told, “these aren’t supposed to be on the floor yet”, whatever that means. I had to ask for them; the manager didn’t know they had them.
19.99 and a 25% coupon brought them to 14.99.
Item# 59167 (Icon PNN8)
C.O.O. Taiwan
I dont have the 8" 96ACF these are copying. Comparison below is my 9" 97ACF, so the tip geometry is slightly different.
The ICON serrations are very well done and mesh well.
The tips touch perfectly at the tip with a hairline gap closer to the pivot.
Im not a HF guy, but initial impressions are good.
Snap-on (L) ICON (R)
I don’t like them ripping off Knipex designs, but don’t mind a little healthy competition for Snap-on.
I was told, “these aren’t supposed to be on the floor yet”, whatever that means. I had to ask for them; the manager didn’t know they had them.
19.99 and a 25% coupon brought them to 14.99.
Item# 59167 (Icon PNN8)
C.O.O. Taiwan
I dont have the 8" 96ACF these are copying. Comparison below is my 9" 97ACF, so the tip geometry is slightly different.
The ICON serrations are very well done and mesh well.
The tips touch perfectly at the tip with a hairline gap closer to the pivot.
Im not a HF guy, but initial impressions are good.
Snap-on (L) ICON (R)
Last edited:
PelicanPines
ALLIANCE MEMBER
Icon score 1(1:28pm edit: added more pics)
I don’t like them ripping off Knipex designs, but don’t mind a little healthy competition for Snap-on.
I was told, “these aren’t supposed to be on the floor yet”, whatever that means. I had to ask for them; the manager didn’t know they had them.
19.99 and a 25% coupon brought them to 14.99.
Item# 59167 (Icon PNN8)
C.O.O. Taiwan
I dont have the 8" 96ACF these are copying. Comparison below is my 9" 97ACF, so the tip geometry is slightly different.
The ICON serrations are very well done and mesh well.
The tips touch perfectly at the tip with a hairline gap closer to the pivot.
Im not a HF guy, but initial impressions are good.
Snap-on (L) ICON (R)
Snap-on 0
four.cycle
Well-known member
I could not resist yet another offering from Titan:
Titan 11066 1/4" drive swivel-head ratchet
nice unit. not sure about slippery chromed handles myself. I guess some guys like them. it seems to roll around a bit more smoothly after a few drops of MMO.
Titan 11066 1/4" drive swivel-head ratchet
nice unit. not sure about slippery chromed handles myself. I guess some guys like them. it seems to roll around a bit more smoothly after a few drops of MMO.
CHI_Tool&Die
Well-known member
Had to run an errand out by a not my normal HF. Last week my local HF didn't have the Icon folding light I wanted to buy with my 10% off coupon. Today this HF had them in stock - I checked on-line first as was suggested here! Going in knowing it's 25% off one item weekend I was able to snag this light for $30.
Attachments
Smokeshow69
Well-known member
Wonder if they will introduce them in orange? Could be trouble(1:28pm edit: added more pics)
I don’t like them ripping off Knipex designs, but don’t mind a little healthy competition for Snap-on.
I was told, “these aren’t supposed to be on the floor yet”, whatever that means. I had to ask for them; the manager didn’t know they had them.
19.99 and a 25% coupon brought them to 14.99.
Item# 59167 (Icon PNN8)
C.O.O. Taiwan
I dont have the 8" 96ACF these are copying. Comparison below is my 9" 97ACF, so the tip geometry is slightly different.
The ICON serrations are very well done and mesh well.
The tips touch perfectly at the tip with a hairline gap closer to the pivot.
Im not a HF guy, but initial impressions are good.
Snap-on (L) ICON (R)
Markoos
Well-known member
180mm cobra to join its younger brother xs for home tool box. Will be handy for sink tap repair.
MooseCustomMotors
Well-known member
- Joined
- Jun 14, 2022
- Messages
- 84
Due to the holidays Matco Monday was on a Friday. Picked up this O2 sensor kit.
Mr. Roboto
Well-known member
Well, I can say with reasonable confidence that this will be my last tool purchase of the year.
jbfsr
Well-known member
There's time left.
PelicanPines
ALLIANCE MEMBER
Figured I would wipe out my credit balance on Amazon. My love of Wera dragged me screaming towards this item. I plan on keeping in my Wera Go Bag... that includes Wera Metric sockets... so I am not concerned it includes "banana sockets". Ratchet can accept sockets AND 1/4" Hex... without an adapter. Out of pocket... $14... plus all my credits. Retail its pricey... $130ish
Smokeshow69
Well-known member
Looks like they just released these cutters and slip joints as well.
Attachments
What is the link for the deal? Still works?
Has anybody tested these Icon pliers against Doyle ones? Really curious whether there is any meaningful difference.
Fedwrench
ALLIANCE MEMBER
I think the only meaningful difference would be that, the Icons are attempting to be snap on clones whereas, the Doyle pliers are using Klein tools as their inspiration
Going back for the cutters today. Saw them last night too. Hadn’t seen them before. The HF associate who rang me up scanned the needle nose, computer paused for a second, and registered. Guy said, I didn’t even know we got those and had them. I haven’t even seen them yet! He was surprised. I wondered the same about the cutters.
CHI_Tool&Die
Well-known member
Yep. They still have it. Home Depot link
four.cycle
Well-known member
^ considering I paid $26.34 for a pair of those Klein needle-noses a couple months back, that's not a bad deal there.
captain14
Well-known member
HD usually runs that deal at least once a year and maybe around Father’s Day too.
Madjik Man
Well-known member
- Joined
- Dec 3, 2015
- Messages
- 1,521
Took advantage of the 24% off coupon on the Doyle's and a 25% coupon I got in an email for the Icons.
Smokeshow69
Well-known member
Great minds think alike. Scored the last pair in the store today with a 25% off couponTook advantage of the 24% off coupon on the Doyle's and a 25% coupon I got in an email for the Icons.
. Knocked it down to $15 which is good for what you get.Attachments
Last edited:
Bryan Burns
Well-known member
Beautiful set!
LWB
Well-known member
Good deal. No one has posted how much they were.
KnurledNut
Well-known member
Noticed. Guess I could have mentioned that. Just had no interest in either of those.
The long nose and diagonals are each 19.99. We've been using the 25% off and getting them for 14.99.
I mentioned it in the original post #61,167. And Smokeshow posted pics.
LWB
Well-known member
Noticed. Guess I could have mentioned that. Just had no interest in either of those.
The long nose and diagonals are each 19.99. We've been using the 25% off and getting them for 14.99.
I mentioned it in the original post #61,167. And Smokeshow posted pics.
Not bad at all. I guess i missed that.
jrbpit1
Well-known member
I bought three wrenches to round out my SAE set, got them from HJE. 13/16, 15/16, 1. For Christmas my wife got me 2 things off of my Amazon list, Lisle bearing and seal drivers, and a bushing driver kit made for GM transmissions. And I picked this ultrasonic cleaner for cleaning carburetors off of small engines. 
KnurledNut
Well-known member
Serious props to whoever designed the Icon plier packaging. Cut the zip tie and they fall out.
No fighting, no blood, easy to repackage and return and easy to steal! The thieves will love it! (Calm down, its a joke...kinda.)
No fighting, no blood, easy to repackage and return and easy to steal! The thieves will love it! (Calm down, its a joke...kinda.)
four.cycle
Well-known member
^ I could appreciate the humor more if opening the package on that little Titan ratchet yesterday hadn't required both a pair of needle-nose pliers and a screwdriver.
Those are wire strippers.