Snap-On 5 button lock owner's manual?

[The Frisco Kid]

Anyone have a copy of an owner's manual for a Series 2000 or KR7100 series box? Or know how to program or change the locking code? My box is still set to default code and I'd like to change it.

 

[The Frisco Kid]

Help me GJ, you're my only hope.

Anyone know the official name or another series of box this lock was on? Might help my Google-Fu.


___________________

Posted via tappy tap taparoo.

 

[G_P]

http://www.garagejournal.com/forum/showthread.php?t=121402

turn the butterfly to the left to reset,
then click buttons 2 & 4 together,
then click 3
turn butterfly to the right.

First result from google.

 

[The Frisco Kid]

http://www.garagejournal.com/forum/showthread.php?t=121402

turn the butterfly to the left to reset,
then click buttons 2 & 4 together,
then click 3
turn butterfly to the right.

First result from google.

Like I said in the OP, I know what the default code is, but I want to change mine - which is why I need an owner's manual.

 

[Wrapitinbacon]

Call snap on customer service they have an archive of manuals on file, they should be able to email it to you.

 

[Kenn1]

I am looking for information to change my 5 button lock combination. Currently it will only open intermittently. Any help would be appreciated

 

[Badger 13]

I sold my 2000 Series a few years ago with the full instruction manual, but I made copies of it. I mailed a copy to a GJ member a while back who had the same issues. Never heard from him. Anyway, I will look and see if I still have the lock instructions. If I find them I will send you a PM.

 

[FJ 432]

I sold my 2000 Series a few years ago with the full instruction manual, but I made copies of it. I mailed a copy to a GJ member a while back who had the same issues. Never heard from him. Anyway, I will look and see if I still have the lock instructions. If I find them I will send you a PM.

BADGER

Can you post them? I have the same problem. Thanks.

 

[Badger 13]

I have to find it first, and then give it a try. I know I have it "somewhere", just have to keep looking.

 

[underdawg1]

has anybody found a answer to the snap on 2000 series combination lock problem.... the answer of hitting 2 and 4 at the same time than 3
did not work, thanks

 

[Badger 13]

Follow up. I found the my instruction sheet for changing the combination on the 2000 Series Sanp-on tool box. The default code is correct as in previous post. If your still interested in a the info, send a private mail to my email address, and I will follow up with you. I don't have means to copy and put it on the site. I can try to take a picture of it, but the print is pretty small on the instructions sheet, so I don't know how that will come out. Sorry to make everyone wait. Note: There is NO information on how to open them w/o some type of combination be entered.

Jim

 

[Badger 13]

Here is the info,

 

[zieg85]

Here is the info,

Thank you for this information

 

[Smokkin]

Hello,
I have just acquired one of these but the bottom box is locked. They gave me the combo but it doesn’t seem to work. I feel pretty dumb for asking but, how exactly do you enter the numbers?

 

[Badger 13]

Read the above listed instructions in post # 12, that should help. These locks can be a little finicky, so make sure you move the un-lock knob a little prior to pushing in the buttons.