Snap on krcs46 mod thread .
- Thread starter Trbobuick
- Start date
Dohcness
Active member
You literally have the cleanest setup on a krsc46 I can find on the net! Don't be surprised when I post my pics copying your every move. I was wondering if your bottom drawer was going to be changed into a 12" to match?
Thank you .I thought about it. I could swap one from a krsc40 in there, but i dont have any tools that need that much room. I was trying to find an 8 inch for my side cab but no luck yet.
Yes.
You will need (2) of part number 4107FJL82PJJ (for extreme green)
And (1) of part number 8-05288ALRS slides since you will already have a set in the 8 " drawer
Hell , you could put 14 two inch drawers in there if you wanted too.
Last edited:
I just checked out how much to add two 4" instead of the 8" and it will be expensive and I will be stuck with a useless 8" haha.
If I do go down that road and replace the 8 with two 4's will any drilling be required or are all the holes for the slides already there?
Also Trbobuick, how does the JKRR40W55 adhere to the top of the cart?
If I do go down that road and replace the 8 with two 4's will any drilling be required or are all the holes for the slides already there?
Also Trbobuick, how does the JKRR40W55 adhere to the top of the cart?
If you pull out one of the drawers and look inside , there are 14 different places where the slides snap into place. When the box first came out they bragged about drawer versatility and even listed the 2 inch and 12 inch drawer part numbers.
The mat comes with a sticky material that is already applied with wax paper that you peel off. It wasnt sticky enough so i used some of the raised 3m puffy 2 sided tape. Works great.
Dohcness
Active member
When you bought the 2" drawers did they come with the slides?
So do you remember what the total bill was for the 2 drawers and everything needed to make it just like the drawer you replaced?
Dohcness
Active member
Nothing. Snap on gave me the 2 drawers , a set of slides , 2 lock and roll inserts , and the top mat for free because they didnt paint my box right. It would be around 450 or so to buy all the stuff needed. Snap on really needs a custom box program . They could make a ton of cash if the offered it.
They cost 25 bucks. What locking tabs are you talking about ? On a heritage box , the slides slide into locking holes in the drawers and square receivers in the box. The slides are threaded on the ends for a screw to lock them to the drawer.
yjWrangler
Well-known member
Man I'd love to have a KRSC46. Whenever I need something that big at work I'm snatching one up. And copying the 2 smaller drawers idea.
Dohcness
Active member
I was referring to the plastic drawer locks that won't allow them to open when your rolling the cart around.
bhalv
Well-known member
did you find that the rubber top was a very tight fit on the lid? I got one yesterday and it seems that you have to have somebody hold down one side while you pull the other end on and hopefully stick it all down.
compyello
Well-known member
I enjoy this post, I am hoping to get one of these soon.
I needed some music to make the day go a little faster.
Bought some cheap MP3 USB speakers and an Energizer twin USB 120 volt plug.
I also bought a cheap hanging hook designed to screw into drywall. The box already had two threaded mounting holes in the lid.
I ran a charging cord up from the usb adapter , so i can charge my phone while i stream pandora radio.I used aircraft wax string to tie all the wires together. Ill have to use someone elses phone to take a pic of my Galaxy Nexus mounted in place.
Bought some cheap MP3 USB speakers and an Energizer twin USB 120 volt plug.
I also bought a cheap hanging hook designed to screw into drywall. The box already had two threaded mounting holes in the lid.
I ran a charging cord up from the usb adapter , so i can charge my phone while i stream pandora radio.I used aircraft wax string to tie all the wires together. Ill have to use someone elses phone to take a pic of my Galaxy Nexus mounted in place.
mdkingsley
Well-known member
Awesome mods on the roll cart, I have the same one that came with the bulk storage area and plastic liner in the bottom. My snap on man gave me a bottom drawer he had that was dented. I had it painted black and bought slides for it, much better than the bulk storage. Now I am trying to decide if I am keeping it I bought a 4107 off CL for $400 it has a dent in one drawer but is in great shape besides that. It is shorter than my big roll cart but has more drawers and all my tools fit in it with room left where I was stacking stuff on top of other stuff in the cart. I also thought about changing some drawers out of the 4107 and customizing the roll cart since the drawers are the same. I have them both and can't decide what to do.
compyello
Well-known member
I did get one in december and it is full. Does snap on have a full width tray that would rest on top of the drawers? I did some looking and found them for other boxes. Or is there another place to get something like that?
cyato
Well-known member
At first, I upgraded just a couple of my heavier drawers with double slides, but I liked how sturdy they felt, so I converted all of my drawers to double slides.
I feel like it was worth the money...
I feel like it was worth the money...
TDWendt
Well-known member
Awesome tHread guys. Gonna look at on Monday, driver just got it in. We're you guys able to haggle price or pay list? Or pay list with a freebie or 2?
compyello
Well-known member
mine was slightly used
jmscollinsiii
Well-known member
Snap-On has 10% off through the end off February. My dealer came off a little but not much.
Steinmetz
Well-known member
More goodies :
JKRR40W55 courtsey of Snap-On ( see why here: http://www.garagejournal.com/forum/showthread.php?t=161449 )
Is that a Baron in the background?
TDWendt
Well-known member
Wondering this also, the one I'm looking at is a "G".
montanafordman
Well-known member
Very nice toolbox! As a side note, I have over a couple thousand hours in seneca II's and will be flying one tonight. (I'll also be flying a PA31-350 Cheiftain) I fly bank cargo and medical specimens for a small cargo company. I"m not a pro mechanic but do a lot of tinkering at home and have mostly SK and craftsman. I did however get my first Snap-on ratchet today. This is not good.
Last edited:
At first, I upgraded just a couple of my heavier drawers with double slides, but I liked how sturdy they felt, so I converted all of my drawers to double slides.
I feel like it was worth the money...
How much did that cost???
cyato
Well-known member
$25 per set x 6. $150. Money well spent for me.