Snap on krcs46 mod thread .
- Thread starter Trbobuick
- Start date
Dohcness
Active member
Okay, I see what's going on. I'm not too worried about it though. It doesn't rest the entire box on that edge, right?
Got one of my drawers in! Now I'm really impatiently waiting for the other.
Got one of my drawers in! Now I'm really impatiently waiting for the other.
Last edited:
Dohcness
Active member
Got my 8x2 casters in today. I love them, the box is much taller and I have the option of either swivel or stationary on all 4 casters. The locks are much more accessible even when they are pointed toward the inside of the cart.
Last edited:
jmscollinsiii
Well-known member
How much were the 8×2 casters? Do they make the box seem more top heavy like it might tip over?
Dohcness
Active member
Not at all! These casters feel much more sturdy. They are $50 a piece but I thinks it's worth the money considering how tall I am. It makes the reach for lower drawer tools a little less stressful. They bolted right in, no modifying or drilling!
bcleen
Member
Last edited:
bcleen
Member
Thanks yea I love it custom ordered it with the smaller drawers and the 8x2 casters with rubber top.I did put the Epiq series logo on it.Might put matching side cabinet on it too.. More pics to come..
bcleen
Member
Ural Airlines Airbus 319..Work for Aeroframe Services we are one of the largest Airbus MRO in the United States..
TDWendt
Well-known member
I don't see a difference in the logo?
Those of you with the different casters....are they that big of a difference? Roll easier? What's the height difference?
I like the 4 small drawers+ the normal ones
Those of you with the different casters....are they that big of a difference? Roll easier? What's the height difference?
I like the 4 small drawers+ the normal ones
bcleen
Member
I have to take another pic.. Will post tomorrow..
Dohcness
Active member
That G series in white is beautiful! Love all those drawers man, very nice!
bcleen
Member
Thanks man your blue one is nice too..Think took long enuff to come in **** almost 3 months but my snap on Rep hooked me up with the smaller drawers and the Epiq series wheels for no extra charge..I was wondering u said our Wheels can swivel and stay stationary? How is that?
bcleen
Member
The bigger casters are the **** makes the box roll way easier and roll over electrical cord and air hoses with ease..I would definitely recommend them and it Doesnt make the box top heavy at all..Its about 2 or 3 inches taller too..
Last edited:
Dohcness
Active member
Take a look under the box and you will notice something similar to a hitch pin with a ring on it. Simply pull on that ring and twist it onto the locking portion of the pin where the ring will seat. I find it moves around aimlessly when all 4 are on swivel but, it's nice being able to push it from any direction instead of just from the side of it.
Dohcness
Active member
After using them for about a week I think in comparison to the 6x2 is that the box doesn't have as much roll. What I mean by that is, if you were to push the box and let go, it would roll for a few feet. If the ground was uneven, it would move. With the 8x2 casters its just as easy to push around but tends to stay put once it is let go. As bcleen said, they roll over anything! I've yet to try an air hose but, electrical cords and small rocks are like they aren't even there!
bcleen
Member
More tools too come..DAMMM this think holds some tools... New Epiq logo put on and added another handle and put a magnetic tool tray on side more Mods too come..
Last edited:
Dohcness
Active member
Another fan of green tools! I like it! Nice organization by the way. Just curious and I'm sure it has something to do with avionics but, what do you use the Walkie talkies for?
bcleen
Member
Thanks..Yea I'm a green tool freak..LOL..We use walkie talkies when we run hydraulics for ops checks..Have to have 5 people with radio's.
bcleen
Member
Thanks for the info on the casters didn't relize u could make them stationary or swivel..Sweet..
Dohcness
Active member
Got my 2" drawers installed.
Last edited:
Fast LT1
Well-known member
Where did you get the green wrench racks?
Dohcness
Active member
eBay! They come up every once in a while. They aren't very hard to come across and sometimes go for very cheap. It just takes a strong motivation to search for them. Mine are Matco and S K branded.
cole_CT
Well-known member
I also like those wrench racks. I'll check eBay sooner or later. Thanks for posting!
1ZlowZ
Active member
I got my krsc246 a week ago. Loving it so far
Pretty big, I like that its deeper, doesn't feel like it'd tip over with its 4 swivel casters while I'm moving it around.
Pretty big, I like that its deeper, doesn't feel like it'd tip over with its 4 swivel casters while I'm moving it around.
Dohcness
Active member
Check a couple pages back.
How did you place a custom order? I had to buy a normal cart and then buy the extra drawers afterwards. Now I have an extra drawer taking up space in my garage!
Extreme-Green-Boz
Member
- Joined
- Aug 20, 2013
- Messages
- 6
Daniel_DePetro
Well-known member
I purchased this customized KRSC46GPJJ yesterday (9-30-2013) for $950.00!!!
Brand spanking new, and flawless!
A guy had two of these for sale on Craigslist for $1,050.00, this one and an Electric Orange one.
I am super happy with it...now to get the rubber top mat and two more 4" drawers to replace the 8" bottom drawer A.S.A..P.!!
(4) 2" drawers
(3) 4" drawers
(1) 8" drawer
Black drawer trim
Brand spanking new, and flawless!
A guy had two of these for sale on Craigslist for $1,050.00, this one and an Electric Orange one.
I am super happy with it...now to get the rubber top mat and two more 4" drawers to replace the 8" bottom drawer A.S.A..P.!!
(4) 2" drawers
(3) 4" drawers
(1) 8" drawer
Black drawer trim
Last edited:
Dohcness
Active member
That's a steal price man! I saw your other post on the tool cart thread. You are the king of roll carts!
fishywarren
Well-known member
Will the side box fit the KRSC326FP model? Their depth's only have a half inch difference.
Last edited:
Chris83
Well-known member
What style are the drawer liners that are included with these boxes?
Daniel_DePetro
Well-known member
# ji46j3500
jmscollinsiii
Well-known member
Has anybody put a side shelf on their cart. I don't want to fab one up or buy the stupid adaptor panel.
fishywarren
Well-known member
SO website only lists the end cab and adapter plate as a KRSC40/KRSC41 accessory. I think this will work on my KRSC326FP .
Any thoughts on this?
Any thoughts on this?
Chris83
Well-known member
Has anybody tried putting the stainless drawer fronts on these carts? I'd like to have the polished stainless one on the front of my bottom drawer, will this work?
Daniel_DePetro
Well-known member
Re: Snap on krcs46 mod thread.
I picked up this newer Extreme Green Snap-on KRSC46 off eBay last night for $725.00
I may have bitten off more than I can chew, as it is in California and I am in Michigan. I hope it can get it shipped cheap!
I bought it so I can take two of it's 4" drawers and use them to replace my bottom 8" drawer, making my other Extreme Green KRSc46 quite possibly the ultimate tool cart configuration: 9 drawers; (4) 2" drawers, and (5) 4" drawers.
Once I get it here and swap out the drawers, I will then gift this one to my father to use with it's (3) 4" drawers and (2) 8" drawers.
I picked up this newer Extreme Green Snap-on KRSC46 off eBay last night for $725.00
I may have bitten off more than I can chew, as it is in California and I am in Michigan. I hope it can get it shipped cheap!
I bought it so I can take two of it's 4" drawers and use them to replace my bottom 8" drawer, making my other Extreme Green KRSc46 quite possibly the ultimate tool cart configuration: 9 drawers; (4) 2" drawers, and (5) 4" drawers.
Once I get it here and swap out the drawers, I will then gift this one to my father to use with it's (3) 4" drawers and (2) 8" drawers.