Source for U-Clips, aka Fender Clips, Speed Nuts?

[Zrexxer]

I've been working on my Jeep doing replacement door latches, etc. which means I'm taking a lot of interior trim panels off lately.

I've come across a bunch of missing, bent, or stripped u-clips. I used to have a crappy assortment from HF, which somehow got lost in my last move. Looking online, the only ones I seem to find are the exact same 170-pc clip and screw assortment that HF sells. Different names, different prices, but all exactly the same kit.

I'd like something a step up from this - anyone have a good source for these hardware items? The only better assortments I've found so far are from Wurth and are about $275, which is of course impractical for me.

 

[fluid power]

kimballmidwest.com

https://www.kimballmidwest.com/catalog/flipcatalog/index.html#26

 

[Ponchoguy]

Dorman, Wurth and just about any of the body hardware suppliers out there.

 

[engineer2]

http://www.clipsandfasteners.com/

My best source is the local salvage yard. They don't even bother to charge you for little stuff like that.

 

[nadogail]

They are also known as Tinnerman nuts.

 

[fred d]

I am a Winzer Rep. We are similar to Wurth and Kimbalmidwest

If you go to
Www.Winzerusa.com
and get me part numbers of what you are wanting and quantity, I will shoot you pricing.

On these message boards I always sell at 10% over my cost. The reason is I have to pay 8.25% in tax, and like to help out other hobbiest.

If you need right away, shipping from Dallas will be about $14 no matter what the weight. 1/2 pound-100+ lbs still flat shipping rate usually have in 2 days

If you are not in a hurry(2-3 weeks) I would be happy to order on my weekly order and mail direct in a "if it fits it ships" box for about half of that
Let me know if I can help

 

[chops101]

Most auto parts stores have these. It is not like you would need that many.

 

[Zrexxer]

It is not like you would need that many.

Thanks for all the suggestions and offers. While you're right that "I don't need that many," I've learned something over the years - if I need fasteners once, I'll probably need them again. I'm through going to a hardware store or a parts store and buying one bolt, or three screws... I try to buy things in anticipation of the next time I'll need them, and hopefully save myself a special trip next time. Doesn't always work out, but every time I get a little closer to my goal of just having what I need "in stock."

 

[rcktsled]

McMaster Carr

http://www.mcmaster.com/#speed-nuts/=z5ggrz

 

[Richard Cranium]

I have Hillman, But they are expensive. Most likely the same as harbor freight.

 

[Stuart in MN]

Try Ace Hardware - the one down the street from my house sells them.

 

[clubairth]

These guys are the ultimate master of the odd fastener/clip. They have everything and you will spend a lot of time finding what you want.

I am an old car guy and they cover a huge range of items.

https://www.auveco.com/product/auto.html
.
.
.

 

[maxpower_hd]

We have a True Value in my area that has all that stuff too. I do agree with buying more than you need. I also keep everything from past projects in case I need them. I have about 12 of those from other vehicles.

 

[Hpozzuoli]

I got a box of them from HF. They can't screw something like that up!

 

[homebuilt burner]

I buy extras as well and then next time I can't seem to find them so I buy more plus some "extras".

auveco is where I would go. or doorman

 

[ms fowler]

Try these guys. online catalog too.

They specialize in car fasteners.

http://www.restorationspecialties.com/

 

[gungatim]

Napa. they have an entire section of plastic rivets, fender clips, etc. you will be overwhelmed with their selection.