To avoid these ads, REGISTER NOW!

The OFFICIAL "FREE SOCKET" thread!

Status
Not open for further replies.
Z

zachzach

Well-known member
Joined
May 23, 2017
Messages
48
Location
Florida
Re: The OFFICIAL "FREE SOCKET" thread! : NOT a "wanted" thread!!!

Is there something like this for other tools?


Sent from my iPhone using Tapatalk
 
To avoid these ads, REGISTER NOW!
S

Shelbylex

Well-known member
Joined
Jan 20, 2018
Messages
3,096
Location
MA
Zachzach, are you offering some tools? You may start a new thead for it - may be it will take off.
I think there was an attempt for toolbox trays, but it was short lived...
 
Z

zachzach

Well-known member
Joined
May 23, 2017
Messages
48
Location
Florida
Shelbylex said:
Zachzach, are you offering some tools? You may start a new thead for it - may be it will take off.
I think there was an attempt for toolbox trays, but it was short lived...
Click to expand...



Not very many but I know off the top of my head that I have a single snap on flare nut wrench that I’d like to trade for something and I doubt it would trade locally.


Sent from my iPhone using Tapatalk
 
S

Shelbylex

Well-known member
Joined
Jan 20, 2018
Messages
3,096
Location
MA
I had this idea some time ago:
https://www.garagejournal.com/forum/showthread.php?t=388608

I am not sure what would be the best approach, zachzach. However, it would be good if we had a way to do it. The limitations are mailing things and creating a good enough system where people could SAFELY exchange things (there are always people who would like to scam others especially as deals could get extensive...) I have bunch of things which I do not need (Bonney, Craftsman, Indestro and other sockets, some old carry boxes needing work, etc. If there was a good way to exchange them, it would be good). In my case, I am slowly posting some of those things on CL and e-bay...
I wish there was a good way of sorting through as well: may be creating lists of offered tools by manufacturer, type of tool, etc.
 
M

mille755

Active member
Joined
Jun 14, 2018
Messages
39
Location
Northwest Indiana
Hello,

Picked up a container of loose sockets, these are the spares or ones that do not seem to go with a set, hope someone can benefits from this.

part # Drive Size Point Shallow/deep
Craftsman V 3/8" 13/16" 6 Spark Plug
Japan 3/8" 13/16" 12 Spark Plug
Japan 3/8" 13/16" 6 Spark Plug
No Name 3/8" 13/16" 12 Spark Plug
Japan 3/8" 13/16" 12 Shallow
No Name 3/8" 13/16" 12 Spark Plug
Cornwell 3124 1/2" 3/4" 12 Deep
SK 41124 1/2" 3/4" 6 Shallow
Craftsman V 44337 3/8" 3/4" 12 Shallow
Craftsman V 44336 3/8" 11/16" 12 Shallow
No Name 3/8" 5/8" 6 Shallow
No Name 3/8" 5/8" 12 Deep
Japan 3/8" 5/8" 12 Shallow
Japan 3/8" 5/8" 12 Shallow
Craftsman V 43334 3/8" 9/16" 6 Deep
Taiwan 3/8" 9/16" 12 Shallow
Taiwan 3/8" 14mm 6 Shallow
Craftsman V 44411 1/4" 13mm 6 Deep
Craftsman G 44411 1/4" 13mm 6 Deep
Ohio Forge Taiwan 1/4" 13mm 6 Shallow
Japan 3/8" 12mm 12 Shallow
Craftsman G1 43003 3/8" 1/2" 6 Shallow
Easco 521216 3/8" 1/2" 6 Deep
Powr-Kraft 84W4848 3/8" 1/2" 12 Deep
Craftsman V 44332 3/8" 7/16" 12 Shallow
No Name 3/8" 7/16" 6 Shallow
Taiwan 1/4" 7/16" 6 Shallow
Japan 1/4" 7/16" 6 Extra Shallow
Craftsman V 43301 3/8" 3/8" 12 Deep
Taiwan 3/8" 10mm 12 Shallow
Craftsman VV 43604 1/4" 11/32" 12 Shallow
USA 1/4" 11/32" 6 Extra Shallow
Craftsman VV 43495 1/4" 5/16" 6 Shallow
Craftsman V 43603 1/4" 5/16" 12 Shallow
USA 1/4" 5/16" 6 Extra Shallow
Craftsman VV 43602 1/4" 9/32" 12 Shallow
Taiwan 1/4" 9/32" 6 Shallow
Snap-on 1/4" 9/32" 6 Shallow
USA 1/4" 1/4" 6 Extra Shallow
Ohio Forge Taiwan 1/4" 1/4" 6 Shallow
Craftsman V 43608 1/4" 3/16" 12 Shallow
Taiwan 1/4" 3/16" 6 Shallow
Taiwan 3/8" 3" ext. Extension
Taiwan 3/8" 3" ext. Extension
Taiwan 3/8" 3" ext. Extension
Taiwan 1/4" 2" ext. Extension

Send me a message if you want any.

Thanks
 
S

Sparkynutz

Well-known member
Joined
Jul 16, 2017
Messages
409
Location
Wisconsin
Will pay for those square drive or multipoint square drive sockets in multiple sizes of any brand. My cheap $10 socket set was only one that had a few and are very useful for tap extensions in deep holes I do often on machinery. I lost my most commonly used size and I dont know where to find just those or even what they are called.
Lastly im looking for a 20mm deep well. very uncommon size. any brand will do.
 
X

XJPat

Well-known member
Joined
Nov 28, 2015
Messages
737
Location
Central Jersey, Merica
Sparkynutz said:
Will pay for those square drive or multipoint square drive sockets in multiple sizes of any brand. My cheap $10 socket set was only one that had a few and are very useful for tap extensions in deep holes I do often on machinery. I lost my most commonly used size and I dont know where to find just those or even what they are called.
Lastly im looking for a 20mm deep well. very uncommon size. any brand will do.
Click to expand...
Just an fyi, I believe what you are looking for are tap sockets, Lisle makes them.

Sent from my KFDOWI using Tapatalk
 
To avoid these ads, REGISTER NOW!
S

Sparkynutz

Well-known member
Joined
Jul 16, 2017
Messages
409
Location
Wisconsin
XJPat said:
Just an fyi, I believe what you are looking for are tap sockets, Lisle makes them.

Sent from my KFDOWI using Tapatalk
Click to expand...
I dont think so. I have regular tap extensions at work with a set screw in various sizes. I'm pretty sure these are regular sockets for square drive bolts. I think the ones I have are 8 point but I use them for tap extensions because they fit in tighter holes than the regular extensions do.

Sent from my SM-G960U using Tapatalk
 
T

toolmutt

Well-known member
Joined
Sep 5, 2009
Messages
2,020
Location
Texas
Sparkynutz said:
I dont think so. I have regular tap extensions at work with a set screw in various sizes. I'm pretty sure these are regular sockets for square drive bolts. I think the ones I have are 8 point but I use them for tap extensions because they fit in tighter holes than the regular extensions do.

Sent from my SM-G960U using Tapatalk
Click to expand...

Snaparxon has a full set of 1/2" drive 8 points in the Classifieds.
 
I

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
Curious if someone out there has a Danaher made 15/16" 6 point shallow 1/2" impact socket? My NAPA USA branded one may have taken a ride off with a skid steer last week.

Would just grab a random branded socket off Ebay, but these are 1-5/8" long, while most other brands appear to run 1-3/4" long. Seller I bought the set from is out of 15/16" singles, and trying to avoid buying another set.

USA branded NAPA, Craftsman, Armstrong, Allen, KD, or Kobalt.

Thanks in advance, folks!

EDIT: Forgot I posted this. Luckily my socket turned back up at work.
 
Last edited:
C

Chicken

Well-known member
Joined
Jan 3, 2015
Messages
129
Location
NC
Looking for:

17mm, 1/2 drive, 6pt
19mm, 1/2 drive, 6pt

Happy to cover shipping cost. No specific brand, just trying to fill some gaps.
Thank you.
 
C

c7fx

Well-known member
Joined
Oct 24, 2008
Messages
175
Location
ohio
I'm in the process of returning my fathers Craftsman toolbox to a complete set as it was when it was first purchased.
I am willing to pay for sockets in good shape.

I'm not interested in rusty stuff. Looking for made in America V VV G's

This is what I need to complete his set

1/2 drive
6point metric std 20-21-22 deep 12 13 14 15 16 17 18 19 20 21

SAE std 1" 3/16 deep 3/8 9/16 11/16 3/4 7/8 15/16 1" 1/16 1"1/8

12 point std metric 20 23 25 26 28 29 deep 10mm 11mm 12mm 13mm 15mm 16 mm 18mm 20mm 21 mm22mm 24mm

SAE std 3/8 25/32 1" 3/16 1"1/2 Deep 7/16 1" 3/16

3/8 Drive
6 point metric std 20mm 21mm 22mm

SAE 15/16 1" Deep 15/16 1"


12 point metric std 6mm 7mm 8mm 21mm deep 21 mm 22mm


SAE std 1/4 5/16 7/8 15/16 1" Deep 15/16 1"
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom