"The Punch"
- Thread starter A_Pmech
- Start date
flashpuppy
Banned
Will be waiting for the super master kit. (With roll pin punches.)
Vinko
Well-known member
I have a case idea in mind.
I will be offering a set with both "The Hammer" and "The Punch" in the future, so stay tuned!
I'm looking forward to this.
Update:
Serial #1 is taken!
FOR EXISTING HAMMER OWNERS
Also, for existing owners of "The Hammer" who wish to buy "The Punch" and have the convenience of a Pelican case which will fit both, I'm offering "The Punch" in a fitted Pelican #1450 case, the same case used for the Master Set for $273.07
Simply add your hammer for your own Master Set.
Serial #1 is taken!
FOR EXISTING HAMMER OWNERS
Also, for existing owners of "The Hammer" who wish to buy "The Punch" and have the convenience of a Pelican case which will fit both, I'm offering "The Punch" in a fitted Pelican #1450 case, the same case used for the Master Set for $273.07
Simply add your hammer for your own Master Set.
mkdive
Well-known member
Perfection
Weld-It Fab
Well-known member
A Pmech please PM me with your info so I can send payment via Pay Pal.
irisservice
Well-known member
What is the case Dimensions?
and pics of master set in case?
and pics of master set in case?
CLARIFICATION:
I failed to indicate in the original pricing post that since "The Punch" is a new product, I'm making an introductory offer of free shipping through March 11th.
After March 11th I'll be adding shipping to the total price of all punch sets.
I failed to indicate in the original pricing post that since "The Punch" is a new product, I'm making an introductory offer of free shipping through March 11th.
After March 11th I'll be adding shipping to the total price of all punch sets.
Hi Irisservice,
The cased punch set comes in a Pelican #1150 case as shown here:
http://www.pelican-case.com/1150.html
The Master Set comes in a Pelican #1450 case as shown here:
http://www.pelican-case.com/1450.html
At the moment I don't have photos of the Master Set, but I will have some shortly!
flashpuppy
Banned
Any Idea when roll pin punches will be coming?
v7guy
Well-known member
I'm pretty interested in roll pin punches as well, seems to be all they use in automotive and firearms, not saying I can't use the regular punches.
can we get a stripped down version? no handle etc for a reduced price?
Any chance on more sizes too?
can we get a stripped down version? no handle etc for a reduced price?
Any chance on more sizes too?
I'm going to work on those after I get a few basic sets out there. I have some ideas for a few other styles of pins as well.
v7guy said:
Hi v7guy,
Send me a PM detailing what you would like and I'll see what I can do!
Hi guys,
I've been short on updates recently because planting season is in full swing and I'm the go-to guy when things break down.
However, here's photographic proof that they are indeed progressing:
Handles are next!
BTW: I have two hammers left.
I've been short on updates recently because planting season is in full swing and I'm the go-to guy when things break down.
However, here's photographic proof that they are indeed progressing:
Handles are next!
BTW: I have two hammers left.
John, we're not worried about you taking the money and running, trust me... a more honest and honorable business I've not dealt with.... Take your time, make them to the Paulding Tools quality standards and deliver when ready! I am anxious I must admit, but patient..
mdbeck1
Well-known member
Okay, this is the first time I've seen this thread and since you seem to like ideas.
How about a set in METRIC sizes?
or did I just says something wrong???
How about a set in METRIC sizes?
or did I just says something wrong???
Sick Puppy
Well-known member
Well, I'll be interested for one, so that makes two so far! I can't wait to have the money saved for these...That's a distinct possibility.
arkangel06
Banned
Sweet video!
Just so you don't think I was going to use hardware store O-rings... *shudder*
The tap is a special 3-flute spiral point specifically designed for aluminum alloys. Not cheap ($56 ea.) but they work very well. Especially on punch handle nuts.
The tap is a special 3-flute spiral point specifically designed for aluminum alloys. Not cheap ($56 ea.) but they work very well. Especially on punch handle nuts.
Kevin54
MEMBER EMERITUS
Just so you don't think I was going to use hardware store O-rings... *shudder*
The tap is a special 3-flute spiral point specifically designed for aluminum alloys. Not cheap ($56 ea.) but they work very well. Especially on punch handle nuts.
Just out of curiosity, what makes that tap so special?
Hi Kevin,
The fact that it's specifically designed for aluminum alloys - it is a dedicated-purpose-tap rather than a general-purpose tap. Mainly, three flutes instead of four for more chip clearance and increased rake on the cutting edges to reduce cutting torque.
Moose-LandTran
Well-known member
AP doesn't understand metric.
The suspense is killing me! Hurry up man!
Soon!
Working on the pins now.
Moose-LandTran said:
Yes.
It's extremely difficult.
I... Have... To... Press... A Button....
*strains*
I'm fitting Pelican Cases this evening and you know what that means... Shipping in a few days. Finally.
Photos and video soon!
Additionally, I'm preparing to make another group of hammers. This group will be larger than the first three due to extra demand. It's already 1/3rd sold out!
Photos and video soon!
Additionally, I'm preparing to make another group of hammers. This group will be larger than the first three due to extra demand. It's already 1/3rd sold out!