Above 1200 Sq/FT The Salvage Garage
- Thread starter Strouty
- Start date
Wokspaces above 1200 squarefeet.
casmurbax
Well-known member
At least you are getting some stuff done. Playing Tetris is always fun. Not.
I hope those guesses are wrong, I am heading to Wells tomorrow spend a week up there.
I hope those guesses are wrong, I am heading to Wells tomorrow spend a week up there.
Been raining a bit, looks like it will be stopping soon, making progress, but no way am I going to get what I wanted done today. I still need to get the last 53’ box trailer tonight. I can physically fit it in the yard, but it is going to make things terrible when I go to finish moving things around. Oh well.
I dug out this little chunk of steel, it was a bit of a pain as it had sunk into the ground.
I dug out this little chunk of steel, it was a bit of a pain as it had sunk into the ground.
casmurbax
Well-known member
Does that run? I think not since it was trying to become one with the earth.
Thankfully it did stop around 4pm in Wells.
Thankfully it did stop around 4pm in Wells.
Last edited:
kent_323is
Well-known member
Does that mean that "chunk of steel" aka forklift is going to the scrappers? 
bowtiguy
Well-known member
is the end goal to get off the hill? Or have things changed?
The end goal is to get the bulk off the Hill, but I am still renting the shop for the foreseeable future. Making the exit strategy easier is the current plan. Once I rebuild the Salvage Garage, then I would want to exit the Hill completely. It is baby steps right this minute, but things are starting to align, once that happens everything should be a bit easier.
The current emergency is to cleanup at the SG in prep for snow, we have a couple weeks left, but it will be here sooner than I want!
The current emergency is to cleanup at the SG in prep for snow, we have a couple weeks left, but it will be here sooner than I want!
Got a bunch more moved, think I have the plan pretty much in order, I have to shuffle stuff as I go to maneuver the box trailers. Also been putting things in them that will have to come back out once they are all landed. I think I can have things pretty well situated by the middle of September. Depending on how everything goes, I may try and shuffle things one more time so that I can put gravel under the trailers so they won’t settle as much and the area can be leveled. This would make things easier for loading and unloading as well as snow removal.
casmurbax
Well-known member
Looking at your pictures it's kind of fun to see things from the past...
Are you still working on your QR code?
What about your movie scanning into files?
Are you still working on your QR code?
What about your movie scanning into files?
Last edited:
The QR codes are up and running and I am still using the system, I am glad I spent the time and effort on it.
Movies are slower going, but I am using a program that catalogs them, been fine tuning it so next step is mass entry. Luckily the majority of that can be done with a barcode scanner, unluckily, the majority of my steelbook cases have no barcode...
Movies are slower going, but I am using a program that catalogs them, been fine tuning it so next step is mass entry. Luckily the majority of that can be done with a barcode scanner, unluckily, the majority of my steelbook cases have no barcode...
casmurbax
Well-known member
That's good to hear that things are progressing for you even if not everything had been barcoded yet .
Dixie_Flatline
Well-known member
Tangentially related question, where on Earth do you find your shelves and industrial cast-offs? I'm about to have a new garage space to fit out and would love to save some money! The only thing I have found nearby is the Ritchie Brothers auction place and they don't do drawers, bins, or pallet racking at this location. Any tips for finding this sort of stuff? If you have some unwanted and unloved stuff I am willing to drive to Maine!
Prospecter
Well-known member
Back to the good stuff!!!
Unfortunately I tweaked my back pretty good helping a buddy, been dragging me down for about a week now. I have help tomorrow, but it looks like it is going to be rain, so that is going to screw up my plans. Trying to get some things moved around so I will have the room to do some organizing inside the Salvage Garage. I am assessing my projects and trying to get things in order for the winter, really would like to fix one of the front end loaders ASAP, it would be helpful with the dirt work and the snow removal. One step at a time...
casmurbax
Well-known member
I hope the buddy helps you out.....
Prospecter
Well-known member
Sorry about your back. The rain we've been forecasted lately has been lighter than predicted. Any chance you could dodge most of tomorrow's rain?
The rain might not be too bad, they are saying 0.6" and it is 80% chance from about 11 to 5, lower chance before and after that timeframe. I have moved things around to make some room for activities so something is going to get done. I have to replace all the wheels on three of the pallet jacks I bought, that will be one of the projects for sure. I should have those inside before I leave with enough room to work on them. There is always something to do, just have to keep the motivation going and with my back sore, I am not sure how long I can fake it. 
Well, I screwed up a little bit, I haven’t used Baker, the little 24 volt inside forklift for a while and the battery is way too low to move it. I should have put it on charge earlier, but oh well. The pallet jacks are inside and hopefully there will be enough charge to be able to move Baker in the morning. I did buy another forklift specifically for the battery, but the lifting eye on one side is so nasty that I didn’t dare pick it up. I plan on welding a plate to distribute the weight back to the case before I take it out of the parts forklift. It was a refurbished battery that is not too old and holds a charge much better than the one currently in Baker.
FullRaceMerc
Well-known member
Fixed.
That was my fear. My plan is to do some small plug welds on the new piece, then weld it to the top where I am away from the battery. Will be using a fan to blow air across and away from the weld, also going to use wet cloth as the battery will vent gas that will explode with enough heat. I have never had more than a pucker factor when dealing with them, but no sense in chancing anything.