To avoid these ads, REGISTER NOW!

Time For a Garage update

Roadking96

New member
Joined
Aug 10, 2008
Messages
1
Location
Holly Springs, NC
Been thinking about doing some updates to the Geerage, and found this place. How great is that?

So things I'm gonna be looking at:

  • [*]Need a 220 outlet for Compressor
    [*]Need to add a couple more 110 drops
    [*]Need to plumb for Compressor with PVC or Copper
    [*]Need to raise opener from standard to max ceiling height
    [*]Need to probably upgrade to liftmaster
    [*]Need to figure out which is best/quality/for money 4 post lift
And that's just for starters. I'm sure they'll be more suggestions on how to spend my money.....:thumbup:

How am I doing so far for starters.....

Lookin forward to your input(s), expertise and reading / searching out answers.
RK
 
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!

rsanter

Well-known member
Joined
Dec 22, 2007
Messages
18,492
Location
visalia ca
you need to look at why you think you need more 110 outlets and what you need them for.
if you have a spot with a stationary tool or a work bench then you need an outlet there.

if you are thinking about places you can plug an extension cord into, then you need to add a couple of the drop down type plug reels

when you add the air lines, you need to think about if there is a place you will want to put an air outlet on the outside of the house?

when you install the compressor you will want to install a ball valve and drain line that will make it easy to drain the tank and run the drainline through the wall and outside so you dont have a mess to deal with inside

bob
 
To avoid these ads, REGISTER NOW!
Top Bottom