Tool for Honda Electrical Terminals

[cjarvis]

What tool(s) do I need to dis/reassemble the electrical terminals on Hondas?

 

[engineer2]

I just got the 60-pc universal kit from Amazon. It has some duplicates, but some of the terminal stabbers tend to be fragile.

 

[LXCam]

Steelman tools makes a generic kit that isn’t bad. It’s not as precise as a dedicated pick set but I’ve always s made it work.

 

[Showkey]

90% is knowing where and what to push or pull to get the release.
Universal kit or tools would be the best choice.
If you know the release trick…… a stick pin, sharpened and bent paper clip will work.
Terminal release and lock picking have a lot in common.
Reassemble no tools are required for most. Just direction and position.
Replacing a connector terminal ……..getting the exact terminal can be challenge as there dozens of choices in configuration, size, shapes.
These are old tools and pictures:

 

[cjarvis]

Thanks Gents.

 

[Blt2Lst]

I know you were asking about tools but this may be helpful on the honda terminals.

The end all be all oem pins and clips thread

www.k20a.org

 

[midorix]

1. Micro flathead screwdriver
2. Remembering which side has the clip
3. Patience