Tool ID - triangular scraper?

[caltemus]

I've got a scribe-like tool that was originally purchased by my grandfather when he was repairing clocks as a hobby. I'd like to find another blade for it, and I haven't had success searching online. The closest I've been able to find are hand tools called "triangular scrapers" but they've got wooden handles don't have replaceable points.

I'd like to make a handle and a tip cover, but I'd rather not invest the design time if I can't get another tip long term.

 

[FJ 432]

Might want to check exacto. I have some older blades for their handles. I would call that a fluted carving blade for models.

 

[jsteih]

https://www.amazon.com/SHAVIV-29118-Double-Sided-Scraper/dp/B00852TT5W/ref=sr_1_1?dchild=1&keywords=vargus+double+sided+scraper&qid=1589472267&sr=8-1

Vargus makes a larger one also.

https://www.vargus.com/Vargus//userdata/SendFile.asp?DBID=1&LNGID=1&GID=94

 

[Made in USA]

https://www.amazon.com/SHAVIV-29118-Double-Sided-Scraper/dp/B00852TT5W/ref=sr_1_1?dchild=1&keywords=vargus+double+sided+scraper&qid=1589472267&sr=8-1

Wow - $40 for a triangular scraper blade? Must be Snap-on or Starrett.

Here's what the OP has ($8.70):

https://www.amazon.com/ToolUSA-SCRAPER-SET/dp/B00VUG7BQO/ref=pd_sbs_328_2/131-0449183-7207344?_encoding=UTF8&pd_rd_i=B00VUG7BQO&pd_rd_r=f7cc7cdf-9a21-41d7-816f-5950966d92e5&pd_rd_w=CTt6W&pd_rd_wg=KRab4&pf_rd_p=d13bb895-21d3-4e96-94a7-553aaae51224&pf_rd_r=VDFW31BV371Z9VNENAEG&psc=1&refRID=VDFW31BV371Z9VNENAEG

 

[IMSA GTO]

It's a bearing scraper. Vargas c60 blade might fit that handle, or quick search turned up the source below.

https://www.startoolsupply.com/catalog/index.php?cPath=3437_3523_4536_4537

 

[Made in USA]

Way too small to be a bearing scraper. It's a general purpose three sided scraper, frequently used for de burring work.

Here's a much higher quality example than the no-name cheapies shown above:

https://www.amazon.com/NOGA-Adjustable-Scraper-Set-SC-8000/dp/B00018ACOK/ref=sr_1_1?dchild=1&keywords=noga+T-80+Blade&qid=1589473494&s=industrial&sr=1-1

Here's link to hi speed steel Noga replacement blades in at least 2 sizes:

https://www.mscdirect.com/product/details/05752381?fromRR=Y

 

[caltemus]

Wow - $40 for a triangular scraper blade? Must be Snap-on or Starrett.

Here's what the OP has ($8.70):

https://www.amazon.com/ToolUSA-SCRAPER-SET/dp/B00VUG7BQO/ref=pd_sbs_328_2/131-0449183-7207344?_encoding=UTF8&pd_rd_i=B00VUG7BQO&pd_rd_r=f7cc7cdf-9a21-41d7-816f-5950966d92e5&pd_rd_w=CTt6W&pd_rd_wg=KRab4&pf_rd_p=d13bb895-21d3-4e96-94a7-553aaae51224&pf_rd_r=VDFW31BV371Z9VNENAEG&psc=1&refRID=VDFW31BV371Z9VNENAEG

Here's a much higher quality example than the no-name cheapies shown above:

https://www.amazon.com/NOGA-Adjustable-Scraper-Set-SC-8000/dp/B00018ACOK/ref=sr_1_1?dchild=1&keywords=noga+T-80+Blade&qid=1589473494&s=industrial&sr=1-1
Here's link to hi speed steel Noga replacement blades in at least 2 sizes:

https://www.mscdirect.com/product/details/05752381?fromRR=Y

Thanks a bunch, this is exactly what I was looking for.

 

[larry_g]

That blade you show has many sharpening's left in it, no need to replace.

lg
no neat sig line

 

[caltemus]

That blade you show has many sharpening's left in it, no need to replace.

I filed off the burr today with a *******, then a 2 cut, then a diamond 120-140 grit. It's fine for right now but I can do better. I've been using it as a scribe for a few years

 

[Mohawk Dave]

Yup, just a 3 sided scraper.... Sit in the drawer with all other deburr-ers.

My 3 sided ones are larger, but same thing.... Great for knocking down sharp edges after a piece comes off the milling machine etc.

 

[unslow1]

He was probably using it to deburr holes drilled for over-size bushings. When you rebuild those clocks you have to do a lot of that. My Grandfather was also into that and left me a lot of them.