Tools from the old world

[mrtools]

You just never get sick of looking at those NWS pliers...The designer of them is a genius.

Veeeeeeeryyyyyy nice mrtools.

Thanksssssss!!! buddy

@mrtools : How do you consider your new NWS conbination pliers comparing to your old Merry N°1050 you presented a few weeks ago ?
PS : Are you "mrwrencheq" from Handtoolsgarage.com ?

Both have their own advantages...It hard to say which one is best of the best
honestly I like both
NWS - with beauty and the beast looks, more comfortable handle than Merry , a sharp cutting edge and a good grip too but when I am strongly hold a handle to gripped a work piece it sign a little bit spring action.(hold the handle very very hard)

Merry - Decent looks, regular handle, decent cutting performances, long lasting built, solid handle gripped no sign of spring action even push it hard
* i just my owned opinion
times to Merry get to rest and handover their jobs to NWS
If I have a opportunity I need to test a KEIBA pliers

Plier heads and handle PICS of my old Merry + NWS for comparison

"mrwrencheq" from Handtoolsgarage.com ?

You asked for it:
3 shipments at once:
Stahlwille, Wright and Hazet wrenches, all about the same size - beam thickness. All very comfy, Wright is the beefiest.

Congratulation buddy you always comes with very very nice tools

Thanks, I'll try to get more pics/video up soon!
Great NWS! I more and more get a feeling that I soon will be spending too much €€€ on changing my plier setup from Knipex to NWS. Those look awesome!

Get it and I am very sure you will love it

few more tools i acquired, these were really cheap
Unior VDE screwdriver, which was 1.20 off of ebay

Nice shopping

Plenty of nice tool pics here as always, thanks guys!
More pics:
Ebay haul from Germany, used pipe wrenches, and my 3/8 facom rat for size reference
These will be used as "last resort" - and not for plumbing. As such they will see abuse and their jaws will be chewing on harder surfaces. For such use I find cheaper pipe wrenches -more or less -useless. Shipping manifest said 11.5kg for both.

Awesome giant

@Bhae
Very nice Makita power tools where it made?

Well since Bhae posted his, here is my Acesa
PH3 and PH2

Nice
What your opinion about your Acesa screwdrivers?

Kukko screw extractor set.
Koch Bohrer drill bits

nice
How much $$ Kukko screw extractor set?

 

[bart1]

Mrtools - Thanks, and you do too!

 

[Jure]

Kukko screw extractor set. http://www.kukko.com/index.cfm/DE/home/





Koch Bohrer drill bits http://www.koch-bohrer.com/


@Bhae : where are you located in Spain ?
@kissmeimgerman : Nice Acesa

 

[AutomatiquE]

but when I am strongly hold a handle to gripped a work piece it sign a little bit spring action.(hold the handle very very hard)

I know what you mean, i had the same feeling first time i've handle this plier. The NWS is made from a regular tool steel, more flexible. Your Merry is likely from a harder Chrome-Vandium steel or it's just a question of hardening process

niceHow much $$ Kukko screw extractor set?

EUR 89,- (including taxes and ship.)

Thanks buddy Where have you been ? Any new tools ?

 

[Monte]

Thanks buddy!!!
Yes really like them..one for my work and another one for my collections

some close-up PICS for NWS fans

Thanks for all the NWS pics !!!



lol

@Bhae: nice tools !!

Kukko screw extractor set. http://www.kukko.com/index.cfm/DE/home/

nice set !!

Well since Bhae posted his, here is my Acesa

where did you buy them ?

More pics:
Ebay haul from Germany, used pipe wrenches, and my 3/8 facom rat for size reference

nice huge VBW pliers !!!!

Without running the part number, who knows what this is?

What is this ?

You asked for it:

sweet haul !

 

[Moose-LandTran]

What is this ?

Monte, i can't believe you of all people don't know what it is! I would've thought you'd have one!

It's a special magnetic remover for tappets!

 

[AutomatiquE]

^^Moose, you bought it from a Mercedes dealer or from Wiha ?

 

[Bhae]

You are killing us here Bhae.

Well since Bhae posted his, here is my Acesa

Nice Acesa screwdrivers!

I have some Acesa screwdrivers:

@Bhae : where are you located in Spain ?

Madrid

@Monte: Thanks!
@Mrtools: Thanks, i think the two Makita made in china.



Today GEDORE:

SIEVERT: http://www.sievert.se/default.asp?locId=1&langId=1

old LOMI-POWER: Made in Spain

old Columbia :

 

[Moose-LandTran]

^^Moose, you bought it from a Mercedes dealer or from Wiha ?

Mercedes dealer. Gave them the part number, came next day. ~£25.

 

[Ratchet.]

Monte, i can't believe you of all people don't know what it is! I would've thought you'd have one!

It's a special magnetic remover for tappets!

that's cool think i could find a use for that, i can recall times that it would have been handy (plus the handle looks cool)

might have to track one down now

 

[kissmeimgerman]

@monte - eBay - user 1closeoutdeals - they were cheap but it took some messaging to get him to combine shipping, had almost no communication 8(
@Bhae - Can I buy some Gedore drivers from you?

 

[AutomatiquE]

Mercedes dealer. Gave them the part number, came next day. ~£25.

Ok thanks for info

@Bhae : Nice old and new tools good to see you're offering many brands from different COO
btw, did you start selling Gedore on your own decision or do you have customers who asked for it ?

 

[kissmeimgerman]

Got some great packages today..

and the Zyklop I got from the classifieds..

Even the dog likes it!

 

[Olafur]

More pics, Koken:
1/2" joint
3/8" joint
1/4" socket set
1/2" xzn set
1/2" torx set

 

[superautobacs]

Nice Ko-ken stuff. Those universals are the newly designed ball-joint type too.

Do you have Ko-ken dealers in Iceland, or were they purchased from the UK?

And I can spot a pair of Japanese made pliers. Care to show us?




Something I did over the winter and never posted it:

An alignment punch with a Wera grip handle.

 

[NinetyTwoFifty]

Got some great packages today..

and the Zyklop I got from the classifieds..

Even the dog likes it!

I almost beat you to that one but I was out of money!

 

[MogeraCND]

Here's couple pictures of broken and new AVSA-064s...
Along with OTC ones

Tops

Bottoms...

@Olafur: Nice 1/4" metric Surface Drive set.

 

[Moose-LandTran]

that's cool think i could find a use for that, i can recall times that it would have been handy (plus the handle looks cool)

might have to track one down now

Mercedes-Benz part number: 102 589 03 40 00.

Order from a trade account. I still have my invoice for it somewhere.

 

[mrtools]

I know what you mean, i had the same feeling first time i've handle this plier. The NWS is made from a regular tool steel, more flexible. Your Merry is likely from a harder Chrome-Vandium steel or it's just a question of hardening process

EUR 89,- (including taxes and ship.)

Yeahh!! only careful + professional user can detect it
material + hardening issue
a lot of money invest for that.. hope it worth it

Thanks for all the NWS pics !!!

You are welcome!!

@Mrtools: Thanks, i think the two Makita made in china.
Today GEDORE:

Nice tools especially Bhae
how about your Gedore tools acceptance in Madrid?

Got some great packages today..

Congratulation for your new tools
Very nice
How much you pay for that?

More pics, Koken:
1/2" joint
3/8" joint
1/4" socket set
1/2" xzn set
1/2" torx set

Awesome Koken socket sets
Show us your your Japanese pliers + screwdrivers

Something I did over the winter and never posted it:
An alignment punch with a Wera grip handle.

Nice

Here's couple pictures of broken and new AVSA-064s...
Along with OTC ones
Bottoms...

 

[mrtools]

Snips

 

[handtools-from-germany]

Hello tool friends,

Please excuse my long absence. I had a lot of work but i am glad to present you the new innovations of HAZET tools coming soon.

Greetings from Germany/Bochum

Michael

 

[AutomatiquE]

@kissmeimgerman : Nice Wera

@Olafur : Excellent tools Is Koken a popular brand in Iceland ? Please, show us this Vessel driver

@MogeraCND : Are these cup filters made in Japan ?

@mrtools : Nice pics and nice Enushiki Typical Japanese tool and handle design. Is it your snip ? How old is it ?

@heisse-nuesse : Happy to read you again

 

[bart1]

Got some great packages today..

...

Love the looks of those Wera sockets... Perfect knurling.

Hello tool friends,

Please excuse my long absence. I had a lot of work but i am glad to present you the new innovations of HAZET tools coming soon.

Greetings from Germany/Bochum

Michael

Welcome back! Those aren't new, though

 

[BJ42LX]

Mmm. The hat. The hat. Where can I get the hat?

Normally I don't like to wear commercial hats - why should I provide free advertising for them? But Knipes is sufficiently obscure here in the states that I could justify it...

 

[MogeraCND]

Here are pictures of Asahi Light Tool Double boxend wrenches 10mm to 19mm...




I stopped using these ones after LOF1417 flexed on 14mm bolt...
They are my hobby tools so its ok...


and instant coffee from Thailand.

@AutomatiquE: KTC AVSA-064 is made in Japan but OTC 09228-06500-02 is made in U.S.A. For some odd reason CND Toyota dealers dont sell/carry OTC cups... I like OTC ones better than KTC.
KTC cup filter wrenches, they are chromed aluminium.

 

[AutomatiquE]

^^Thanks. i've got only one oil filter cup tool. It's for my Peugeot
The cup in question is branded Hazet and iirc it's made from a metal sheet. Not a casted aluminium like OTC/KTC.

 

[kissmeimgerman]

Mmm. The hat. The hat. Where can I get the hat?

Normally I don't like to wear commercial hats - why should I provide free advertising for them? But Knipes is sufficiently obscure here in the states that I could justify it...

Emailed them asking about Orbis, then asked for a catalog.

Love the looks of those Wera sockets... Perfect knurling.

Agreed, on to the 3/8 set next...

@kissmeimgerman : Nice Wera

Thanks

Congratulation for your new tools
Very nice
How much you pay for that?

Thanks! $85 for the Zyklop

 

[Monte]

Monte, i can't believe you of all people don't know what it is! I would've thought you'd have one!

It's a special magnetic remover for tappets!

never heard of such a tool and never saw one Didn´t even know that such a thing exist But looks cool !!! maybe i need one

I have some Acesa screwdrivers:

which sizes ?

Today GEDORE:

nice !!

@monte - eBay - user 1closeoutdeals - they were cheap but it took some messaging to get him to combine shipping, had almost no communication 8(

thanks !!

Got some great packages today..

great tools !!!

More pics, Koken:
1/2" joint
3/8" joint
1/4" socket set
1/2" xzn set
1/2" torx set

sweet !!! nice vessel drivers too

Something I did over the winter and never posted it:

An alignment punch with a Wera grip handle.

cool idea !!!!!!

Snips

nice tin snips

Here are pictures of Asahi Light Tool Double boxend wrenches 10mm to 19mm...

cool looking wrenches !!






Finally started to repaint my cheapo jack stands. Can´t stand the red anymore Will try to match the blue of my trolley jack.

 

[dykmore]

Hi everybody! I don't have much time to post here during the reconstruction of my flat, and I still didn't take more pictures of my Old world demolition tools but tomorrow I will take some, I swear... Now I have only photo of one-of-many daddy's voltage testers - made in Czechoslovakia about 1990 by Eleco Vyškov (http://www.eleco.cz/):

And I have a question: Some time ago I bought these 200mm combi-pliers in OBI, but I didn't like them and I borrowed them to my brother. Today I asked him to gave the pliers back to me, because - as I read here - many people would change a part of their body for any NWS product So, my question is: are these combination pliers made by NWS? Because if yes, I will change my mind and from now I will like them as much as I hated them before

 

[Duarte]

My haul for this week..

Some Knipex pliers..

a Facom 467 wrench 12mm

some odd Beta sockets on fleabay

and mint Hapewe pliers at a flea market for $2.

 

[kissmeimgerman]

Not sure about the handles, but the head looks like an older NWS to me.

 

[ash95608]

Yes they are the new NWS 19 finish, I have them on order.

Hi everybody! I don't have much time to post here during the reconstruction of my flat, and I still didn't take more pictures of my Old world demolition tools but tomorrow I will take some, I swear... Now I have only photo of one-of-many daddy's voltage testers - made in Czechoslovakia about 1990 by Eleco Vyškov (http://www.eleco.cz/):

And I have a question: Some time ago I bought these 200mm combi-pliers in OBI, but I didn't like them and I borrowed them to my brother. Today I asked him to gave the pliers back to me, because - as I read here - many people would change a part of their body for any NWS product So, my question is: are these combination pliers made by NWS? Because if yes, I will change my mind and from now I will like them as much as I hated them before

 

[handtools-from-germany]

Love the looks of those Wera sockets... Perfect knurling.



Welcome back! Those aren't new, though

yes, that was a wrong picture for this forum. the new tools will coming up in two weeks. At this time i can post here the pics ...

 

[bart1]

So, Hazet experts, anybody seen this one before?

Actually, it's a custom. Used a Wright 14" long 1/4" extension and fellow GJ member gj67stang putt hat in the handle of a broken Hazet screwdriver I had. Seems to have worked out great. I can use either the hex bolster or the 1/4" female end.

 

[bart1]

...

lol

...
sweet haul !

Glad somebody caught that joke, I thought it would draw a few comments I was really glad to get some Stahls with the old markings.

 

[handtools-from-germany]

this is an great idea. please would you send this pictures to my email-adress:

[email protected]

Thanks a lot...

 

[Monte]

And I have a question: Some time ago I bought these 200mm combi-pliers in OBI, but I didn't like them and I borrowed them to my brother. Today I asked him to gave the pliers back to me, because - as I read here - many people would change a part of their body for any NWS product So, my question is: are these combination pliers made by NWS? Because if yes, I will change my mind and from now I will like them as much as I hated them before

Actually, it's a custom. Used a Wright 14" long 1/4" extension and fellow GJ member gj67stang putt hat in the handle of a broken Hazet screwdriver I had. Seems to have worked out great. I can use either the hex bolster or the 1/4" female end.

nice idea !
Stahlwille has one like that with 1/4" sq. drive in the end of the handle, no hex bolster though

Glad somebody caught that joke, I thought it would draw a few comments I was really glad to get some Stahls with the old markings.

yeah those old Stahlwilles are nice ! But your Hazets are nice too

 

[bart1]

nice idea !
Stahlwille has one like that with 1/4" sq. drive in the end of the handle, no hex bolster though

yeah those old Stahlwilles are nice ! But your Hazets are nice too

Yeah, I have the Hazet version from the Smart Case also, but neither those are 14" long.

Yep, I like both. The Stahls are double box SAE.

 

[Bhae]

@Bhae - Can I buy some Gedore drivers from you?

Can .

Nice wera tools.

Ok thanks for info

@Bhae : Nice old and new tools good to see you're offering many brands from different COO
btw, did you start selling Gedore on your own decision or do you have customers who asked for it ?

Thanks Automatique.
Clients demand Gedore tools.

@Monte:

Thanks Monte.
How about bits Bianditz? and Toptul wrenche?

@Mrtools:

Thanks!
Good acceptance for clients demand proffesional tools.

@Olafur:

Nice koken tools!!

TODAY:

PD: Sorry for my English

 

[dykmore]

The rest of my equipment