ultgar
Well-known member
Where do you find Grade 12.9 hex bolts? I have a lot of metric hardware in my shop and the only grade 12.9 are DIN912 allen (hex) bolts....typically for use with 8mm, 10mm or 12mm hex sockets. SD
Tools from the old world
- Thread starter Monte
- Start date
Where do you find Grade 12.9 hex bolts? I have a lot of metric hardware in my shop and the only grade 12.9 are DIN912 allen (hex) bolts....typically for use with 8mm, 10mm or 12mm hex sockets. SD
I have sent for felo pricelist and screwdriver, but I never recived mail or packet
Can you guys help me?
Thanks
Me too! i'm waiting 10 days...
Miskin
Well-known member
Laro13
Well-known member
shoturtle
Well-known member
If you go to the link monte posted. On the upper right hand side of the page. There is a option for pz or ph to choose from. Just pick the one you want.
http://www.felo.de/en/contacts/
http://www.felo.de/en/contacts/
Laro13
Well-known member
That's strange, that option wasn't there when I was on the site a week ago.
Thanks, I will try again.
I have sent for felo pricelist and screwdriver, but I never recived mail or packet
Thanks
same here
Me too.
But I think I was too late, It didn't say anything about a free gift any more.
+2...
Outline
Active member
Felo sample:
As I was the one who discovered the possibility for the free sample:
The place for ordering the sample (upper right corner) has been there for several weeks now. So no difference there.
Everyone who submitted for a sample should have recieved an email from Jorg Oestreich. If not: Submit another request for a sample screwdriver and mention that you did not recieve one. That should solve the problem.
Are we all clear on the subject?
As I was the one who discovered the possibility for the free sample:
The place for ordering the sample (upper right corner) has been there for several weeks now. So no difference there.
Everyone who submitted for a sample should have recieved an email from Jorg Oestreich. If not: Submit another request for a sample screwdriver and mention that you did not recieve one. That should solve the problem.
Are we all clear on the subject?
I sent my request when it was posted here in the thread, and today I got my confirmation e-mail. They apologized for the delay due to unexpected high demand.
I also got my confirmation email today from Helena Rosien after a second email.
On another topic, I'll be visiting Vienna middle of February and would klike to know from the folks living there, any good opportunities for tool purchases in Vienna?
Today's new arrival. I've been searching for a good example for a long while now - that was either local or shipped. Finally landed this one on ebay. I'm very pleased, it runs almost silently and incredibly smooth.
Please excuse the poor quality phone pics:
View media item 28183
View media item 28184
Please excuse the poor quality phone pics:
View media item 28183
View media item 28184
Old world tool mod! 
http://www.garagejournal.com/forum/showthread.php?t=184808
Edit: All work done using a Wiha torx driver, so this one really is start-to-finish "old world"
View media item 28189
http://www.garagejournal.com/forum/showthread.php?t=184808
Edit: All work done using a Wiha torx driver, so this one really is start-to-finish "old world"
View media item 28189
Last edited:
Dear Sir or Madam,
We are very glad to hear about your interest in our range of high quality screwdrivers.
Unfortunately we have no retailer in your country handling Felo tools.
We appreciate your understanding that we therefore can not send you the ordered sample.
Felo answered to me and i'm so angry about this fact. They don't have dealer in Bulgaria...
We are very glad to hear about your interest in our range of high quality screwdrivers.
Unfortunately we have no retailer in your country handling Felo tools.
We appreciate your understanding that we therefore can not send you the ordered sample.
Felo answered to me and i'm so angry about this fact. They don't have dealer in Bulgaria...Dear Sir or Madam,
We are very glad to hear about your interest in our range of high quality screwdrivers.
Unfortunately we have no retailer in your country handling Felo tools.
We appreciate your understanding that we therefore can not send you the ordered sample.
Wow, that is lame.
I wonder if UK interest is being handled by Tradesman's Choice/thefelotoolshop then?
I've had no email yet, and no screwdriver of course, but I wasn't actually expecting anything to turn up for weeks (free things tend to be slow).
Bahco prices... in Finland,why these was priced so high?
8224 etc was made in argentiina.
I chance my forum name Joki > Lasu
I lost email and passwords last summer.Thanks to the Mods
Morjens,70- luvulla tehty ehkä?
8224 etc was made in argentiina.
I chance my forum name Joki > Lasu
I lost email and passwords last summer.Thanks to the Mods
Morjens,70- luvulla tehty ehkä?
bart1
Well-known member
Some toys from GJ member Shipm8.
Hazet 1/2" ratchet, old clear handled pliers and bit holder. Stahlwille 13 x 17 OE wrench. Milton tire gage. Funky Matador bent 10mm.
Hazet 1/2" ratchet, old clear handled pliers and bit holder. Stahlwille 13 x 17 OE wrench. Milton tire gage. Funky Matador bent 10mm.
handtools-from-germany
Well-known member
handtools-from-germany
Well-known member
Hi Marcone,
the pn of the opener is CL863-FL!
the pn of the opener is CL863-FL!
decaf
Well-known member
Dear Sir or Madam,
We are very glad to hear about your interest in our range of high quality screwdrivers.
Unfortunately we have no retailer in your country handling Felo tools.
We appreciate your understanding that we therefore can not send you the ordered sample.
I got this message today:
"Dear Sir or Madam,
We are very glad to hear about your interest in our range of high quality screwdrivers.
We will send you the ordered sample during the next days.
Please note that the delivery will be delayed due to the enormous demand.
We apologize for this delay.
Best regards"
Carolus basically replaced Rahsol as the cheap tool lineup. The Rahsol tools were made in Germany, the Carolus tools of nowadays are mostly (all ?) imported.
nice mod !Old world tool mod!
are that Euros ??
....because the finnish citizens seem to earn a lot of money... ?
some welders gloves:
found this bench grinder wheel:
http://carbochim.ro/
are that Euros ??
....because the finnish citizens seem to earn a lot of money... ?
Euros,I couldn't believe my eyes,have to take pictures. I prefer knipex,nws,vbw
200A Mig
Last edited:
Outline
Active member
I sent my request when it was posted here in the thread, and today I got my confirmation e-mail. They apologized for the delay due to unexpected high demand.
Dear Sir or Madam,
We are very glad to hear about your interest in our range of high quality screwdrivers.
Unfortunately we have no retailer in your country handling Felo tools.
We appreciate your understanding that we therefore can not send you the ordered sample.
Just tell them that you want to order at a dealer in Germany or thru thefelotoolshop. Maybe then they will come around.
I got mine in 2 days flat... Hope that everybody else gets his.
I do wonder why they had such a high demand....
Last edited:
s_pellegrino
Member
NWS 111-79-ESD-120 (scroll down to the bottom of the page).
Ash over at german-hand-tools sells them for $25.99. I believe these are also made by Schmitz (the rest of the ESD electronics pliers are, which may appear to be chrome, but is actually just polished steel). Schmitz stuff I own is very well made, and offers a very good value.
Small parts storage with removable trays.
View media item 28203
View media item 28204
View media item 28205
View media item 28206
Every single part of the removable trays has a COO.
View media item 28207
View media item 28203
View media item 28204
View media item 28205
View media item 28206
Every single part of the removable trays has a COO.
View media item 28207
Miskin
Well-known member
Where did you find this boxes? From your Gedore dealer? I'll check here if i could find these, quality is great. I knew them from a circlip plier' box i purcased a while ago.
Dear Sir or Madam,
I recived this mail from felo:
"We are very glad to hear about your interest in our range of high quality screwdrivers.
Unfortunately we have no retailer in your country handling Felo tools.
We appreciate your understanding that we therefore can not send you the ordered sample.
Best regards
Helena Rosien"
Can you help us to get free felo screwdrivers
I recived this mail from felo:
"We are very glad to hear about your interest in our range of high quality screwdrivers.
Unfortunately we have no retailer in your country handling Felo tools.
We appreciate your understanding that we therefore can not send you the ordered sample.
Best regards
Helena Rosien"
Can you help us to get free felo screwdrivers
Yes from my dealer. And yes the quality is great. These boxes intended for counter displays (εκθετήρια you know?). I don't know if they sold separately. In the catalog the prices are for the boxes with tools.
You can find almost the same organizer with good quality from plano. I definitely will buy a plano organizer if I find one.
Can you not just buy the Raaco Assorter boxes in Greece without the Gedore label?
Edit: Lok types faster than me
Miskin
Well-known member
Noooo, I'm a COO nerd!
The RAACO boxes still say Made In Denmark. Here's one of mine:
View media item 23412