Tools from the old world

[damienga15de]

Here's my daily use tools, the blue 1/2 drive set is Draper expert metric and sae sizes, red 1/4 drive metric set, Allen keys and ratchet crimper are teng tools. vice grips is king Tony knipex snips pliers long nose pliers and cobra, Swiss tools pz2 pz1 pz0 and 4 flat screwdrivers and fluke meters.


Sent from my GT-I9505 using Tapatalk

 

[Boredmechanic]

That 1/2 set looks like a blue point

 

[damienga15de]

That 1/2 set looks like a blue point

I bet it isn't half the quality of blue point. Time will tell I only picked it up today as I need it for my new job maintenance in a tortilla producer. Working on Lawrence bread making machinery. Until now iv never owned any sae tools but these machines are American. I tend to keep all my tools at home king Tony.

Sent from my GT-I9505 using Tapatalk

 

[Boredmechanic]

I wouldn't be disapointed . Looks the same

 

[upgrading]

yes... both
http://www.wiha.com/de/produkte/wiha-accessories/wiha-adventskalender-2018.html

Thanks.
Not on Amazon over here yet.

 

[Monte]

Hi Monte,

See below:

http://www.rothenberger.com/fr/prod...oucheur-professionnel-par-aspirationpression/

http://www.rems.de/debouchage-de-tubes/deboucheur-a-depression-et-pression/rems-pull-push.aspx

http://www.albert-roller.de/pipe-an...uction-pressure-pump/roller-s-easy-clean.aspx

good find
it seems they buy from several different manufacturers like Rothenberger or Zenten e.g.
http://www.zentenbg.com/index.php/e...astic-multilayer-tubes/raptor-o-1-26mm-detail
http://www.albert-roller.de/cutting...pe-shear-up-to-26-mm/roller-s-picco-p-26.aspx
and from other companies like this tool
http://www.albert-roller.de/cutting...er-up-to-54-mm/roller-s-rondo-8-35-10-54.aspx from Italy
http://www.werkzeuggigant.com/item.php5?id=98831366&lang=de ...
Their power tools are usually from Suhner (1 saw is from AEG).
(at least the motors, i dunno if the "head"/gearcase is from them too, but maybe thats what Rollers/Rems actually produce.)
http://www.suhner-transmission-expert.com/site/index.cfm?id_art=14354&vsprache=EN
http://www.suhner-transmission-expert.com/site/index.cfm?id_art=14356&vsprache=EN
http://www.suhner-transmission-expert.com/site/index.cfm?id_art=14355&vsprache=EN

Thanks.
Not on Amazon over here yet.

coming soon
















7" "Mammut" wire wheel for the large angle grinder

 

[mr_jack]

I wouldn't be disapointed . Looks the same

Doesn't look to me the same at all.
The cases and ratchets are different and the Drapper has no breaking bar.

 

[Monte]

Bosch wire brush with T-shank






made for this machine:

 

[dutch79]

Very cool movie of DTM 2014 (notice the Hazet tools that are used )

 

[Boredmechanic]

NOS hazet on eBay..just a heads up.
http://pages.ebay.com/link/?nav=item.view&id=350697397581&alt=web

 

[Monte]

Wespa hack saw blade
www.wespa-simonds.de

 

[Jure]

someone tried this 1/4 flex head matador ratchet? how good it is,since it seems to be made in taiwan..

 

[Jure]

and one info about UNIOR,all unior 1/4 sockets are made in taiwan,all 1/4 sockets,+1/4 flex head swivel joint and
i have no idea but if some of you have a 1/4 unior set pay attention to finish,sockets are smooth and different chrome color then the rest of set.

 

[upgrading]

someone tried this 1/4 flex head matador ratchet? how good it is,since it seems to be made in taiwan..

Unfortunate about the COO.
Looks cool.
Is that button on the handle a lock for the flexhead ?

 

[Jure]

Unfortunate about the COO.
Looks cool.
Is that button on the handle a lock for the flexhead ?

yes,it's a button for head lock,but i have no idea how good it holds,how deep are the locking dents,will the head wobble etc etc,ill visit the local bauhaus tomorrow so i can see it in person.

 

[Jure]

and seems like this type of matador roto is same as KS roto,who makes them in taiwan?

 

[zhome888]

Some interesting tools in this tread

 

[Boredmechanic]

Wish i had a good tool store stuck with snap on

 

[Jure]

Wish i had a good tool store stuck with snap on

lol,what about sears,lowes,hf etc etc

 

[Boredmechanic]

lol,what about sears,lowes,hf etc etc

I said good tool store ._____.

 

[PBCampbell]

That KS Tools Roto Ratchet bears a strong resemblance to the Wera Zyclops.

 

[Jure]

That KS Tools Roto Ratchet bears a strong resemblance to the Wera Zyclops.

yep,zyklop's are made in taiwan as well.

 

[Crown Imperial]

i said good tool store ._____.

We have the top of the line of awesomeness harbor freight what are you talking about!?!?
Pittsburgh > Hazet

 

[superautobacs]

and seems like this type of matador roto is same as KS roto,who makes them in taiwan?

Probably company X that ended up winning the bid for a manufacturing contract. Cost per volume is more than likely a crucial factor for the buyers (KS Tools / Matador / Heytec / SW Stahl / BGS / Carolus / KraftWerk / Force / Teng / etc.)

That KS Tools Roto Ratchet bears a strong resemblance to the Wera Zyclops.

A strong resemblance?

The only resemblance is that it's a swivel head ratchet. ....which has been around for over half a century.

 

[SawtoothJL]

yep,zyklop's are made in taiwan as well.

My zyklop 3/8" said made in the czech Republic

 

[superautobacs]

My zyklop 3/8" said made in the czech Republic

It's ASSEMBLED in the Czech Republic--that's more accurate!

 

[SawtoothJL]

It's ASSEMBLED in the Czech Republic--that's more accurate!

Now that makes more sense! [emoji16]

 

[spoon671]

Now that makes more sense! [emoji16]

How about Wera hex key set. Assembled in Czech Republic as well?

 

[SawtoothJL]

How about Wera hex key set. Assembled in Czech Republic as well?

I'm not sure about that one actually. Although I'm sure someone on here knows! [emoji106]

 

[marcone]

Not exactly old world but I like them already. Master set from 6 to 32mm (skipping 31).
USAG 285 is identical to Facom 440 but in a satin finish (Facom 440 seems to be all shinny) except for the open ended jaws which are polished.

Thinking of putting my Made in France Facom open end spanner set up for sale, got too many spanners right now

 

[Jure]

How about Wera hex key set. Assembled in Czech Republic as well?

made in CZ,the best hex key set i ever had!

 

[Qualitytools]

Not exactly old world but I like them already. Master set from 6 to 32mm (skipping 31).
USAG 285 is identical to Facom 440 but in a satin finish (Facom 440 seems to be all shinny) except for the open ended jaws which are polished.

Thinking of putting my Made in France Facom open end spanner set up for sale, got too many spanners right now

Do you have photos of your made in France ones you can share?

 

[marcone]

Do you have photos of your made in France ones you can share?

I posted photos at one point in time but can't actually find the respective post:

 

[Lofthouse]

New Ball end Torx from Hafu

 

[Qualitytools]

I posted photos at one point in time but can't actually find the respective post:

They appear to be short are they? Are they 44 or 440 can't quite tell from the photo but possibly N=44.

 

[node105]

not exactly old world but i like them already. Master set from 6 to 32mm (skipping 31).
Usag 285 is identical to facom 440 but in a satin finish (facom 440 seems to be all shinny) except for the open ended jaws which are polished.

thinking of putting my made in france facom open end spanner set up for sale, got too many spanners right now

no such thing

 

[Luis Arturo]

Cut glass Jobo

 

[Skin]

It's ASSEMBLED in the Czech Republic--that's more accurate!

Read that the metal portions were forged and finished by a German company, not sure how much truth there is to that.

 

[Blöckw@rt]

3t floor jack fresh from China !

 

[marcone]

They appear to be short are they? Are they 44 or 440 can't quite tell from the photo but possibly N=44.

44 is the double open ended spanner type from Facom, 440 is the combination spanner type. Length wise, the 30x32mm spanner is about 30cm long.