The Ratchet Man
Well-known member
I told myself I was going to stay out of this thread and then you post this...
I just can't win.
Tractor Supply Clearance 2014
- Thread starter HotwheelsYJ
- Start date
I told myself I was going to stay out of this thread and then you post this...
I just can't win.
Ign
Well-known member
Get a 3M backing pad for 4.5" scotch brite pads and you can polish welds like you wouldn't believe.
archirelic
Well-known member
Bobcat753
Well-known member
I told myself I was going to stay out of this thread and then you post this...
I just can't win.
Your welcome!
wellpoison
Well-known member
i went to see if my TS had the Porter Cable sawzall on sale and they were out of stock. but i went over to lowes, showed them the website with the price of 39.99 and they price matched it! boom 79.99 down to 39.99
is it this one on sale at sears?
http://www.sears.com/porter-cable-p...2-in-angle/p-SPM6035263507?&redirectType=SRDT
http://www.sears.com/porter-cable-p...2-in-angle/p-SPM6035263507?&redirectType=SRDT
bobbycos
Well-known member
dang it !!!
closest TSC to me is like a 45 minute drive
might just get a wild hair and go up there to check it out
closest TSC to me is like a 45 minute drive
might just get a wild hair and go up there to check it out
MagnumForce
Well-known member
Live in a rural area, 45 minutes is nothing LOL
Ign
Well-known member
So a few other things I picked up at the same time which are very useful to me:
assortment of Lynch Pins was $2.99, put it at $2.70 with the 10% coupon I had received in the mail. I got all three assortments as 2 individual pins will run you $2.70 pretty easy (depending upon size etc)
assortment of lock pins was priced at $6.99 but rang up $4.99, thus $4.50 with my coupon. I got both that they had, I seem to run thru these on my trailer (see pic below, already installed a new lock pin on one ramp pivot). Clamshell Bulldog couplers use these too.
a gallon of Greased Lightning was $2.99, thus again $2.70 w coupon. From what I can tell this is just basically Formula 409 which is awesome for cleaning machines and the drivetrains on my bikes. I'll use it.
edit: my store had started moving a lot of random clearance stuff to a small space next to the rattle can paint, FWIW. Some of it was still in the bins at the front of the store (bins which seemed to pop up before Xmas).
assortment of Lynch Pins was $2.99, put it at $2.70 with the 10% coupon I had received in the mail. I got all three assortments as 2 individual pins will run you $2.70 pretty easy (depending upon size etc)
assortment of lock pins was priced at $6.99 but rang up $4.99, thus $4.50 with my coupon. I got both that they had, I seem to run thru these on my trailer (see pic below, already installed a new lock pin on one ramp pivot). Clamshell Bulldog couplers use these too.
a gallon of Greased Lightning was $2.99, thus again $2.70 w coupon. From what I can tell this is just basically Formula 409 which is awesome for cleaning machines and the drivetrains on my bikes. I'll use it.
edit: my store had started moving a lot of random clearance stuff to a small space next to the rattle can paint, FWIW. Some of it was still in the bins at the front of the store (bins which seemed to pop up before Xmas).
Attachments
Ign
Well-known member
I don't think anyone doubted the TSC jack was the same as HF, but I snapped some shots today next to my HF version.
With their light weight these are great for taking to look at used car purchases, etc. Quickly elevate a wheel to look for wb play, etc. And of course they seem to be very popular at the track. The downside is they wouldn't have enough capacity to, say, change a flat on a loaded (tandem axle) trailer in most cases.
edit: the only difference is the TSC version has a rubber pad on the bottom of the handle to protect bumpers and valances. No big deal but a nice touch. Some of the HF versions may also have this, I think they sell the 1.5T jack under a couple different item numbers?
With their light weight these are great for taking to look at used car purchases, etc. Quickly elevate a wheel to look for wb play, etc. And of course they seem to be very popular at the track. The downside is they wouldn't have enough capacity to, say, change a flat on a loaded (tandem axle) trailer in most cases.
edit: the only difference is the TSC version has a rubber pad on the bottom of the handle to protect bumpers and valances. No big deal but a nice touch. Some of the HF versions may also have this, I think they sell the 1.5T jack under a couple different item numbers?
Attachments
Last edited:
squashman702
Well-known member
I saw a couple of ATV winches on clearance at the Taunton, MA store- I assume it was the same where you are at?
Bobcat753
Well-known member
Nope my store is in Merrimack,NH,I'm on the border of nashua so it's easy to go there.
over an hour and a half at best for me. They are building one 3 blocks from my house though but no idea when it will be finished. They just started having lights on inside the building in the last few days. I doubt they will have anything on clearance till after they are open for abit.
The Ratchet Man
Well-known member
Well I drug myself into TS to see about some Warn winches. They were all clearanced but the shelf was empty. I asked the manager about any back stock and she said a guy came in Saturday and bought every single Warn winch they had. *******!
In an attempt to save the trip I found these 2 items on clearance:
Dewalt SAE impact socket set $14.99
http://www.tractorsupply.com/en/store/dewaltreg%3B-1-2-in-10-piece-impact-readyreg%3B-socket-set
Traveller Roller Cabinet Seat $19.99...no longer on the site but referenced here.
http://www.garagejournal.com/forum/showthread.php?t=239417&highlight=traveller
In an attempt to save the trip I found these 2 items on clearance:
Dewalt SAE impact socket set $14.99
http://www.tractorsupply.com/en/store/dewaltreg%3B-1-2-in-10-piece-impact-readyreg%3B-socket-set
Traveller Roller Cabinet Seat $19.99...no longer on the site but referenced here.
http://www.garagejournal.com/forum/showthread.php?t=239417&highlight=traveller
elronin
Well-known member
The Ratchet Man
Well-known member
This One, looks cool 74 bucks on Ebay good buy for 19 bucks
Yes, that's the one. Was $79.99 marked down to $29.99. Figured it was worth the $29.99 but it rang up $19.99 at the register. It has ball bearing drawers and is rated for 350#'s. The cushion on the seat is twice as thick as my HF one without the drawers. Made the trip worth it for sure since I'll be doing ball joints on my truck tomorrow. The drawers will come in handy for all the tools I'll be using. I'll put it together tonight and see how well its built.
The Ratchet Man
Well-known member
Well, I put it together and have a couple of thoughts...
It will probably hold what the 350# it claims. It's built pretty well. The drawers are ball bearing and they come with liners but don't expect 100# per drawer. The side trays fold up and secure. Not sure if you can tell that from the picture. They also come with magnetic liners to keep things from rolling around. The seat cushion is twice as thick as my HF roller without the drawers and has better foam and vinyl. Overall it might have been worth full price to some, definitely worth $29.99 as it was marked and was a steal at $19.99. It will last a long time at the house and would probably last a decent amount of time in a shop.
It will probably hold what the 350# it claims. It's built pretty well. The drawers are ball bearing and they come with liners but don't expect 100# per drawer. The side trays fold up and secure. Not sure if you can tell that from the picture. They also come with magnetic liners to keep things from rolling around. The seat cushion is twice as thick as my HF roller without the drawers and has better foam and vinyl. Overall it might have been worth full price to some, definitely worth $29.99 as it was marked and was a steal at $19.99. It will last a long time at the house and would probably last a decent amount of time in a shop.
Dewalt hacksaw:
Found this chicom made hacksaw on clearance for about 50% off. Seems solid for the price. The store where I found this one still has two of the Porter-Cable recip saws and two of the Black Bull grinder stands for about half off the original marked price.
Found this chicom made hacksaw on clearance for about 50% off. Seems solid for the price. The store where I found this one still has two of the Porter-Cable recip saws and two of the Black Bull grinder stands for about half off the original marked price.
Radio Ron w4ron
Well-known member
subed
.
.
Got a Justin ** felt black hat today for 29.99, that's $20.00 off the cheapest anywhere online. The hats are not found on their website but were in my stores clearance area.
here's a link to one http://www.cavenders.com/western/co.../JS0242BHB?cid=reco-_-product-detail-_-reco-1
here's a link to one http://www.cavenders.com/western/co.../JS0242BHB?cid=reco-_-product-detail-_-reco-1
Attachments
Last edited:
Ign
Well-known member
The CH Hanson magnetic stud finder was priced at $4.99 clearance in my store but rang up
$2.99. I have a friend who makes his living everyday as a carpenter and swears by this over all other stud finders. Here's the product on Amazon ($8.99)
http://www.amazon.com/gp/aw/d/B000IKK0OI/ref=mp_s_a_1_1?qid=1406830706&sr=8-1&pi=SY200_QL40#
$2.99. I have a friend who makes his living everyday as a carpenter and swears by this over all other stud finders. Here's the product on Amazon ($8.99)
http://www.amazon.com/gp/aw/d/B000IKK0OI/ref=mp_s_a_1_1?qid=1406830706&sr=8-1&pi=SY200_QL40#
Cruzomatic
Well-known member
That stud finder is awesome and works perfect. I have been using mine a bunch hanging my Gladiator cabinets and it works much better than the Zircon that I have. It laches onto the dry wall screws and where there are screws there are studs. I can't recommend this little stud finder enough.
Good luck.
Ign
Well-known member
I just got another 10% coupon in the mail. Good 8/11 thru 8/24. Watch your mail!
IMCA38
Well-known member
IMCA38
Well-known member
This is what was on it.
Attachments
Ign
Well-known member
Ign
Well-known member
Ign
Well-known member
Ign
Well-known member
Ign
Well-known member
Ign
Well-known member
Ign
Well-known member
MagnumForce
Well-known member
Well considering the 4 major new build tractor name brands are red (Case IH, Massey Ferguson) Blue (New Holland) or Green (well duh) that may bring you closer to "getting" it.
Ign
Well-known member
Nope
MagnumForce
Well-known member
I don't get custom colored toolboxes.