To avoid these ads, REGISTER NOW!

Trinco BP dust collect for blast cabinet

alan camby

Well-known member
Joined
Dec 3, 2011
Messages
1,566
Location
South of Indianapolis, Indiana
I have been wanting to pull the trigger on a larger, to me, Blast cabinet.
I am 99% sure I will be going with the Trinco 48x36 (48"wide, 36" deep x 36" high). the lower end model I am looking at comes with the BP dust collector.

I was wanting to get the TP Vac-50 as my dust collector for three reasons.
HEPA, cartridge filter, and exhaust has a hose connection hole.

I really don't like the idea of a bag filter. Just seems like it will be a mess, have little surface area, and be a pain to clean out. I will be using a dust deputy so that should help quite a bit.

My main question is, Does the BP come with a exhaust outlet hole that a hose can be connected to? I really want to run the exhaust outside.

I am trying my best to protect my lungs and really like the idea of exhausting outside.

I have received quotes with and without the BP collector. I will only save $100 if I omit the collector. I can live with the Bag and lack of HEPA if I can exhaust outside.

thanks for any help.
 
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!

930dreamer

Super Moderator
Staff member
Joined
Oct 7, 2009
Messages
22,986
Location
Amarillo,TX and Stinnett,TX
Correct, you would need to go to the 180-DC to vent outside. I have one (vac-50) that I bought separate for another cabinet if your interested in a very lightly used one?
 
To avoid these ads, REGISTER NOW!
Top Bottom