Updated Chinese Cut50F Group Buy

[Professur]

I sent a money order a while ago, I am number 300 something. When will I be receiving the cutter? Sorry, I haven't read all the previous pages.

C'mon ... there's only 823 posts before this one and you've already read some of them .

 

[Aquamoose]

Flux capacitors are the answers. I modified mine to work on reconstituted chicken poop. I've got 24 chickens ya know.


Sent from my iPhone using Tapatalk

 

[volleyball]

Blood will work only if it is from the carotid artery. I don't remember if it actually works or at that point, cutting metal is the least of your concerns.

 

[littleponderosa]

Ok, where did I see a recommendation for an air filter set-up for the machine? I've either missed it during the page search, or was it on another thread? I have concerns about the present filter off my compressor and think doubling up would be beneficial.
Bill

 

[c6matt]

when you guys cut all the plasma what are you building with it? I've never cut plasma before, but this Group buy was too good to pass up!

 

[rslaback]

Flux capacitors are the answers. I modified mine to work on reconstituted chicken poop. I've got 24 chickens ya know.


Sent from my iPhone using Tapatalk

The flux capacitor is what makes time travel possible.

You need a Mr. Fusion.

Here you go:

 

[Bobf]

Ok, where did I see a recommendation for an air filter set-up for the machine?
Bill

Don't know which post, but I recall somebody recommending a Motorguard 40 or 60 unit with a replaceable element.

 

[MoparTrucks]

I have a Chinese friend who gave me this recommendation on these - 不要指望雞它們孵出前
sounded like sage advice to me.

Looking forward to getting mine!

 

[Maui]

That translates to, "Do not count chickens before they hatch.". Yep, good advice.

Maui

 

[volleyball]

Some guys must drive their family crazy in the days before Xmas

 

[littleponderosa]

Bobf, thanks for the assist. Order will hopefully go into today if I can sleep. If not, it will be tomorrow with all the other stuff I've put off.
Bill

 

[LB-1911]

Ok, where did I see a recommendation for an air filter set-up for the machine? I've either missed it during the page search, or was it on another thread? I have concerns about the present filter off my compressor and think doubling up would be beneficial.
Bill

Now That I Have a Plasma Cutter......
http://www.garagejournal.com/forum/showthread.php?t=280959

 

[Aquamoose]

New arrival time, May 7th :-(

Hope y'all are ok with it. Apparently it was too many to fit on a Chinese Junk so an alternate vessel was secured.

Sean


Sent from my iPhone using Tapatalk

 

[warweapon762]

New arrival time, May 7th :-(

Hope y'all are ok with it. Apparently it was too many to fit on a Chinese Junk so an alternate vessel was secured.

Sean


Sent from my iPhone using Tapatalk

Are you expecting to have them all shipped by the end of May? I will be moving in Mid July.

 

[Shopteacher]

Aqua - if you are starting a list as to who needs them RIGHT now, or who can wait a little while so others can get the unit before moving or whatever, push me down the list. I am in no immediate rush, (electrical isn't installed yet)

 

[Beemer533]

Yeah, as much as I am looking forward to playing with this, I can wait.. I have tons of other stuff I have to work on..
Thanks for the updates though!

This post edited by the NSA

 

[jmlcolorado]

Add me to the "Im too excited to wait......but I'll wait" list so others in need can get theirs sooner.
Actually might work out since I'll be out of the country mid May. Wouldn't want it sitting on the porch for a week.

 

[KyleQ]

I'm looking forward to getting mine - lots of fabrication to do before Memorial weekend...

 

[63roundbody]

New arrival time, May 7th :-(

Hope y'all are ok with it. Apparently it was too many to fit on a Chinese Junk so an alternate vessel was secured.

Sean


Sent from my iPhone using Tapatalk

No problem, thanks for the update.

 

[Zrexxer]

I don't have a dog in this hunt, but I was enjoying tracking where the container ship is and I came across a photo on another website of the Greenwich Bridge. Thought y'all might like to see the ship your stuff is on:

 

[gayler]

I get it from a guy down the street; he makes it in his basement


Sent from my iPhone using Tapatalk

What else is he making in his basement? I could have used mine at least half a dozen times this week just on stuff I needed to cut, not counting all the stuff I could cut just for the fun of it. On side note I got out the Harbor Freight wire feed welder and started to practice. After putting in a magnifying lens I can lay a pretty good bead on 3/16 pipe!

 

[gayler]

New arrival time, May 7th :-(

Hope y'all are ok with it. Apparently it was too many to fit on a Chinese Junk so an alternate vessel was secured.

Sean


Sent from my iPhone using Tapatalk

Hey Auquamoose! Charge your battery!

 

[gungatim]

wow technology is amazing sometimes...every one of those triangles is a container ship...just off the coast of China...this is better than tracking Santa Clause

 

[gayler]

I don't know why, but this song is stuck in my head today!

 

[gungatim]

I hope that's not Gordon Lightfoot, wreck of the Edmund Fitzgerald...

 

[MoparTrucks]

I hope that's not Gordon Lightfoot, wreck of the Edmund Fitzgerald...

Dude ...Noooo!!!



Sent from my iPhone using Tapatalk

 

[littleponderosa]

I'm able to wait. Didn't really want to say that, but reality is painful. I'm still on hold for a filter set anyway.
Bill

 

[volleyball]

I am not so generous. I've got a few things that need metal cut so I can weld it. I am anxious but not going to yell "Are we there yet".

 

[AnEv942]

http://www.vesselfinder.com/?imo=9302085
Wow just booking along- off the coast of Japan now, looks like headed for open water. How DEEP is it out there? 2 weeks- just to cross the Pacific...Once they reach Long Beach then what happens? Trucked was mentioned, means they'll drive right by our house...
On the List On the Line
On the Pallet On the Boat...

Arrived Long beach 05/07/2015...
At the Dock

 

[Mitchw123456]

I am not so generous. I've got a few things that need metal cut so I can weld it. I am anxious but not going to yell "Are we there yet".

I couldn't agree more. Bad thing is now we can actually watch where the slow boat from China is! If I wasn't such a cheap *** I would've broke down and bought another one because I needed one months ago. Other bad thing is if it ever shows up the ole ladies to do list won't have the excuse of "I'm waiting on the plasma to get here, it'd be so much easier."

 

[FullRaceMerc]

http://www.vesselfinder.com/?imo=9302085
Wow just booking along- off the coast of Japan now, looks like headed for open water. How DEEP is it out there? 2 weeks- just to cross the Pacific...Once they reach Long Beach then what happens? Trucked was mentioned, means they'll drive right by our house...

It looks like it is heading further north at the moment. Any chance it unloads some cargo in Seattle before heading to Long Beach?

 

[rslaback]

It looks like it is heading further north at the moment. Any chance it unloads some cargo in Seattle before heading to Long Beach?

It's heading to a sea lane. There are charted courses in the ocean that make shipping optimal based on currents and what not. Boats almost never take a direct route. If you ever find yourself stranded on an island and you haven't seen a boat go by in a couple week stretch, you never will.

 

[AnEv942]

It's heading to a sea lane. There are charted courses in the ocean that make shipping optimal based on currents and what not. Boats almost never take a direct route. If you ever find yourself stranded on an island and you haven't seen a boat go by in a couple week stretch, you never will.

Time to paint a face on a coconut?

 

[jmlcolorado]

Wilson!

 

[RonRock]

Sure hope these work when we get them. HaHa

No worries, they'll probably be OK. Most stuff from China is perfect, right?

 

[MoparTrucks]

Wilson!

I thought that was a soccer ball?

 

[rslaback]

I thought that was a soccer ball?

Volleyball.

 

[MoparTrucks]

Volleyball.

Ahhh Jm and I must have been drinking beer when we saw that flick!

 

[Aquamoose]

It's been entertaining reading the comments among each other! Keep in mind that it doesn't track ships in open waters, only in areas close to land so don't be puzzled if it has remained at one position for days. Eventually, it'll "warp" to Long Beach, spend about a day there, then make its way to Seattle where it will get offloaded.


Sent from my iPhone using Tapatalk

 

[volleyball]

I thought that was a soccer ball?

Look at my name and revise your answer.