jmlcolorado
Well-known member
I seriously can't believe all the legwork it's taken to make this come to fruition.
Seriously impressive!
Seriously impressive!
Updated Chinese Cut50F Group Buy
- Thread starter Aquamoose
- Start date
3 at 8
Well-known member
Absolutely impressive indeed. I will say what has been said many times but feel it is worth repeating. Thank you for all your efforts and commitments on this. Aquamoose is truly a man who can see the forest even though the trees are in the way. 
rexpittman
Well-known member
Absolutely impressive indeed. I will say what has been said many times but feel it is worth repeating. Thank you for all your efforts and commitments on this. Aquamoose is truly a man who can see the forest even though the trees are in the way.
X2
Two things,
One - Are you nuts? It's not going to sit in the driveway, it's going right in the shop.
Two - I actually HAVE a forest but no worries, I have chainsaws and I know how to use it. ;-)
Thanks for the compliments!
Sent from my iPhone using Tapatalk
One - Are you nuts? It's not going to sit in the driveway, it's going right in the shop.
Two - I actually HAVE a forest but no worries, I have chainsaws and I know how to use it. ;-)
Thanks for the compliments!
Sent from my iPhone using Tapatalk
I agree that you have done a great job handling this. Very impressive. Can I still request that the updates are done as you mentioned, that all updates will be posted on the first page. Just saves from reading through all the comments to find them...
Thanks
Thanks
No problem. It's what I'm planning to do anyway. I figured that the news that it's on the way here is insignificant to post in the updates.
Seeing pictures of a moose pulling a ship isn't everyone's cup of tea. ;-)
Sean
Sent from my iPhone using Tapatalk
FullRaceMerc
Well-known member
Can anyone confirm that the dimensions for the machine are 385mm x 155mm x 295mm? I'm designing a cart to hold my new Miller 211 and this plasma cutter, but I've been seeing some conflicting dimensions for this machine.
The Alibaba ads show the 385mm x 155mm x 295mm (15.188" x 6.125" x 11.625"), but some eBay machines are showing 18" x 10" x 16" and 19.688" x 10.25" x 18.125". I'm mostly worried about the height as the machine is going to go on a shelf below the Miller and 6.5" is a pretty larger variance. Thanks.
The Alibaba ads show the 385mm x 155mm x 295mm (15.188" x 6.125" x 11.625"), but some eBay machines are showing 18" x 10" x 16" and 19.688" x 10.25" x 18.125". I'm mostly worried about the height as the machine is going to go on a shelf below the Miller and 6.5" is a pretty larger variance. Thanks.
AnEv942
Well-known member
I m in the midst of adding a shelf for cutter on table. The ad Dimensions is what I was using, mine is going to also store on a shelf: they are small but...
assumed per the specs
385x 155x 295mm
(15 5/32" x 6 1/8" wide x 11 5/8" tall)
I stopped on my table, its going to be close but I have some leeway, so as not to shoot myself in the foot over dimensions decided to finish build when cutter is in my hands. Same with the cord end...waiting until I can verify- soon we hope.
assumed per the specs
385x 155x 295mm
(15 5/32" x 6 1/8" wide x 11 5/8" tall)
I stopped on my table, its going to be close but I have some leeway, so as not to shoot myself in the foot over dimensions decided to finish build when cutter is in my hands. Same with the cord end...waiting until I can verify- soon we hope.
autoclassicnut
Well-known member
guys... finish the carts and tables. if it is wrong, try out your new plasma cutter! problem solved
gayler
Well-known member
BumpAny gnus?
littleponderosa
Well-known member
Now I'm ready. New regulator and filter set-up, will be dedicated to the plasma cutter cart. Local hardware store has the plug-in and I've got metal.
Worse than a kid in a candy store, the anticipation is getting bad.
Bill
Worse than a kid in a candy store, the anticipation is getting bad.
Bill
Strouty
Well-known member
Mine arrived today!
It was delivered by tiny elephants wearing fake antlers.
It was delivered by tiny elephants wearing fake antlers.
gayler
Well-known member
Off your meds again? I'll let you have some of mine, if I can use your plasma cutter.
Strouty
Well-known member
Mine is imaginary.
bczygan
Well-known member
He's been off his meds and running rampant for some time now.
BBSkylark
Well-known member
Wow what an undertaking Aquamoose. Great job handling this! Just wish I would have seen this a few months ago when it was open.
Strouty
Well-known member
petethekiller
Well-known member
Qatar qWA 1
petethekiller
Well-known member
gayler
Well-known member
The worst part is I never ordered one.
The meds, or the plasma cutter? I'd say getting either without ordering is a win!
Badasssapper67
Well-known member
Cant wait!
Latest unofficial update (half of the reason is I can't update the first post thru my iPhone but will later this weekend)
Tmw,, the shipment will be in my hands. I've noticed s few inquiries about delayed shipping and actual dimensions of the unit. I'll crack mine open and get measurements & pictures as well as find a recommended outlet for it from Home Depot do you could use the same part # before your cutter arrives.
As for shipping, I'll start shipping on Monday and will note past messages & emails for delayed & re routing. If you have any concerns & requests, let me know via email. If you're good to go, no need to do anything. You'll be notified via UPS on the status. I pray that the shipping estimate has not been changed since then. There has been a minor uptick in fees which will be covered by the extras that you guys have thrown in. I'll post documents & receipts.
Meanwhile, I'll post an "official" update this weekend. I just wanted to get the info out to you all.
Stay tuned!
Sean
Sent from my iPhone using Tapatalk
Tmw,, the shipment will be in my hands. I've noticed s few inquiries about delayed shipping and actual dimensions of the unit. I'll crack mine open and get measurements & pictures as well as find a recommended outlet for it from Home Depot do you could use the same part # before your cutter arrives.
As for shipping, I'll start shipping on Monday and will note past messages & emails for delayed & re routing. If you have any concerns & requests, let me know via email. If you're good to go, no need to do anything. You'll be notified via UPS on the status. I pray that the shipping estimate has not been changed since then. There has been a minor uptick in fees which will be covered by the extras that you guys have thrown in. I'll post documents & receipts.
Meanwhile, I'll post an "official" update this weekend. I just wanted to get the info out to you all.
Stay tuned!
Sean
Sent from my iPhone using Tapatalk
littleponderosa
Well-known member
Beemer533
Well-known member
Thanks again Sean for the effort.. How much was the "minor" uptick in fees?
The extra cash sent was for you personally, I'd hate to see you having to spending it on other stuff.. I'd be glad to pitch in to help if there are additional costs.
This post edited by the NSA
The extra cash sent was for you personally, I'd hate to see you having to spending it on other stuff.. I'd be glad to pitch in to help if there are additional costs.
This post edited by the NSA
littleponderosa
Well-known member
I'd like to assist with the extra fee costs if possible. Sean, send me a pm and cashola will be coming your way. Still think I should buy you and the woman a decent meal with a bottle.
Bill
Bill
Mitchw123456
Well-known member
Yea if you need more to cover shopping or whatever let us know. I don't have an issue throwing in a little more
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
TheOtherChris
Well-known member
Ya moose, I'll toss a bit more in to help you out if shipping cost's have gone up. After all it's only been what????????.................3-4 years, something like that.
Longer.
Originally this buy was for the STEAM POWERED version
Have you forgotten? It was originally for the MOOSE powered version and it pales in comparison to the HORSE powered version, hence the CUT50F y'all are getting. [emoji1]
You guys are great, thanks for the support. I'd like to focus on getting these cutters to each one of you then we'll worry about the extra fees later.
PS - I opened one up and I (gasp) TOUCHED it! Looks well built! Details will follow tmw night. Been gone practically all day.
Sean
Sent from my iPhone using Tapatalk
You guys are great, thanks for the support. I'd like to focus on getting these cutters to each one of you then we'll worry about the extra fees later.
PS - I opened one up and I (gasp) TOUCHED it! Looks well built! Details will follow tmw night. Been gone practically all day.
Sean
Sent from my iPhone using Tapatalk
Ben Buck
Well-known member
Oh My !!
An actual Look See PLUS Touch
I need a beer to celebrate!
An actual Look See PLUS Touch
I need a beer to celebrate!
Mitchw123456
Well-known member
I have a bunch of 1/4" plate that cant wait to meet it... Plus a smoker with a rotted firebox..
Picked up the load in town yesterday. 2 pallets were busted so we repalletized (new word?) it and got it home. My young boys took each one off and stacked them in the garage since I couldn't off load the pallets anyway. Next is the task of packing the consumables then get them ready to be shipped.
I've got a full weekend of soccer for my boys so we're out of town Wife never batted an eye. In fact, she was cute when she asked if I'd like to stop at Home Depot for the electrical connector between games.
Sean
Sent from my iPhone using Tapatalk
Beemer533
Well-known member
Sweet!! I think I see mine
She's a keeper! I feel sorry for your local ups driver when he shows up for the ship out . Enjoy the games Sean .
Sent from my iPad using Tapatalk, hobbiest ,Hobart 140 mig welder, Hobart ac/dc stick, miller 250 sycrowave tig, thermal dynamics plasma, Chicago electric 180 mig ( modified of course) , Powermatic/Everede mill.
Sent from my iPad using Tapatalk, hobbiest ,Hobart 140 mig welder, Hobart ac/dc stick, miller 250 sycrowave tig, thermal dynamics plasma, Chicago electric 180 mig ( modified of course) , Powermatic/Everede mill.
volleyball
Well-known member
Sean, nice load!!
Looking at your trailer you have a couple of receiver tubes sticking up. What are they for? I have one that came with mine and not sure what the mfg had in mine.
Looking at your trailer you have a couple of receiver tubes sticking up. What are they for? I have one that came with mine and not sure what the mfg had in mine.