Walmart Clearance

[Poe34]

These Stanley toolboxes are $25 in some places. If they aren't marked down in your store yet, keep an eye on it, as Walmart employees are responsible for marking down items. Many places have it at $99 and $50. I was going to say that I'm sure this obviously not the highest quality, but I'll leave that for the comments below, lol.

https://www.walmart.com/ip/Stanley-...ickid=SctV2WzzuxyOWYbwUx0Mo38VUknT1Oyu8zsuyQ0

 

[yrly]

These Stanley toolboxes are $25 in some places. If they aren't marked down in your store yet, keep an eye on it, as Walmart employees are responsible for marking down items. Many places have it at $99 and $50. I was going to say that I'm sure this obviously not the highest quality, but I'll leave that for the comments below, lol.

https://www.walmart.com/ip/Stanley-...ickid=SctV2WzzuxyOWYbwUx0Mo38VUknT1Oyu8zsuyQ0

I got one on a clearance markdown after Black Friday a few years ago that came with a socket set. They’re actually not too bad if you pay under $70 (I’d say $50 or under is fair without the socket set). The drawers are kinda shallow. I use it for fasteners as opposed to tools.

 

[chstrumpetdude]

Went to one of my supercenters last weekend and got the GS-1 Channellock set for $19. Not the biggest discount, but still cheaper than anywhere else. Still had a large stock of channellocks and stanley pliers.

 

[chstrumpetdude]

Channellocks at my store just went to almost 50% off anyone else’s prices


Sent from my iPhone using The Garage Journal mobile app

 

[CLINT-THE-GREAT]

My store went 50% off om Channellocks as well. I picked up a couple

 

[Doohickey]

I think Keter makes some nice plastic products, and these tables are rated to hold up to 1000 lbs.

Keter Folding Worktable, adjustable resin work bench with clamps, black $17 to $49 (YMMV)

https://brickseek.com/walmart-inventory-checker/?sku=19285488

Even if it shows out of stock, you may want to check around the tool department.

 

[Doohickey]

A made in USA item.

Dasco Pro 18 inch Wrecking Bar $1.50 to $4.50 (YMMV)

https://brickseek.com/walmart-inventory-checker/?sku=47521955

 

[upgrading]

Prices on the Komelon's have dropped to +50% near me.

Got a 30' for $5

 

[measuredtwice]

Prices are crazy cheap at some stores. Yesterday, I picked up the last of what was available at my local store. Channellock USA for $5, Hyper Tough (Wilde USA) pry bar for $2.

It's not on sale but it is worth mentioning that they just added a 9 piece Made in USA screwdriver set. Nice to see more Made in USA. They look very similar to the old Craftsman USA. Retail is $12.48 for 9 pieces.

https://www.walmart.com/ip/Hyper-Tough-9-Piece-Acetate-Handle-Screwdriver-Set-935G9C/180080069

 

[BillMoney]

Walmart was picked clean on first clearance, people see $2 off and buy it like idiots

 

[jacked_72]

My local Walmart Neighborhood has the 14 oz cartridges of "General Purpose Grease" on clearance for $.75 a tube. Amber and Grey colors. My only problem is that SuperTech/Walmart doesn't say the rating of the grease other than NLGI 2. Probably OK for chassis but not bearings.

 

[boblikestools]

Prices are crazy cheap at some stores. Yesterday, I picked up the last of what was available at my local store. Channellock USA for $5, Hyper Tough (Wilde USA) pry bar for $2.

It's not on sale but it is worth mentioning that they just added a 9 piece Made in USA screwdriver set. Nice to see more Made in USA. They look very similar to the old Craftsman USA. Retail is $12.48 for 9 pieces.

https://www.walmart.com/ip/Hyper-Tough-9-Piece-Acetate-Handle-Screwdriver-Set-935G9C/180080069

Picked up a Hyper Tough 8” pry bar on clearance for $3.50 today, they had one left. I also saw the USA made screwdrivers, I was thinking maybe GreatNeck makes them, as they look similar. I have a GreatNeck 3/8” slotted screwdriver that I use for prying, View attachment 1scraping, and it’s held up excellent.


Sent from my iPhone using The Garage Journal mobile app

 

[netbrad]

I want to say thanks to everyone here. I picked up some stuff and posted it in the New Tools thread:

https://www.garagejournal.com/forum/showpost.php?p=8343006&postcount=49539

Black and Decker won't be carried anymore according to one of the guys working in the tool department. These Vaughan hammers may go on clearance at some point since it looks like they are replacing them with a house brand. They are still full price at $23.97.

 

[netbrad]

I also saw this toolset for $25 but I didn't need it.

 

[loranger]

$30 at local walmart.

Untitled by loranger1, on Flickr

 

[sbyrne92]

Thought this was a pretty good buy. They’re clearing out all the old shop vacs for the HART brand. I have a shop vac like this but the hose is 1-1/4” and it doesn’t work well for larger debris and the wheels on it ****.

Paid $40

 

[gamp945]

I want to say thanks to everyone here. I picked up some stuff and posted it in the New Tools thread:

https://www.garagejournal.com/forum/showpost.php?p=8343006&postcount=49539

Black and Decker won't be carried anymore according to one of the guys working in the tool department. These Vaughan hammers may go on clearance at some point since it looks like they are replacing them with a house brand. They are still full price at $23.97.

The Made in USA Vaughan is $23.97, and the Chinesium replacement is $21.88. Is selling out American manufacturing really worth a measly 9% savings?

I picked up the Keter work table (Made in Israel like all Keter stuff I think) for $30, regular $75:

https://www.walmart.com/ip/Keter-Fo...e-resin-work-bench-with-clamps-black/19285488

 

[netbrad]

I went to a different Wal-Mart but most of the clearance tools were non-existent. I did get some Stanley hacksaw blades for $1.50 and some B&D impact bids for $1.00. They had paint and tiles on clearance and I picked up some carpet tiles to line the bottom of a steel cabinet. They also had Thompson's wood cleaner for $5 a jug. YMMV.

 

[Mctiger1985]

$200 in store. Seems like a decent price. I'll wait for another drop hopefully.

 

[red]

I went to a different Wal-Mart but most of the clearance tools were non-existent. I did get some Stanley hacksaw blades for $1.50 and some B&D impact bids for $10.00. They had paint and tiles on clearance and I picked up some carpet tiles to line the bottom of a steel cabinet. They also had Thompson's wood cleaner for $5 a jug. YMMV.

Thanks netbrad
Checked out the paint on clearance and found some Zinsser Cover Stain oil base primer for $5 per gallon. Normally $20 -they had just dropped the price yesterday.
Also picked up a 3.5g container of Kilz2 latex for $15 https://www.walmart.com/ip/KILZ-2-I...-Same-Trusted-Formula/295315869?selected=true
Lots of vinyl tile & Thompson sealer available -but didn't have anything I could use it on

 

[toolmiser]

The Made in USA Vaughan is $23.97, and the Chinesium replacement is $21.88. Is selling out American manufacturing really worth a measly 9% savings?

I picked up the Keter work table (Made in Israel like all Keter stuff I think) for $30, regular $75:

https://www.walmart.com/ip/Keter-Fo...e-resin-work-bench-with-clamps-black/19285488

It's about the markup, not the retail price. That's all they care about.

 

[upgrading]

Clearance tools are all gone in my Walmart.

Got a few $3 long sleeve t-shirts today.

Not much else on sale.

 

[64merc]

Everything pretty much all gone at the various stores I checked. I did bite on a Stanley shop vac for $40 though.

 

[chstrumpetdude]

Everything pretty much all gone at the various stores I checked. I did bite on a Stanley shop vac for $40 though.

Mine had those for $30!

Everything was marked to about 50% at mine 2 weeks ago so by now it is probably gone.

I was hoping the B&D drill accessory set that retailed around 30 marked down to 17 would get cheaper but never did.

 

[PearlWhiteGT]

Local stores had Greenworks cordless chainsaws, blowers, mowers, string trimmer, hedge trimmer all on clearance.

 

[loranger]

Stanley 8 gallon shop vac down to $30 at my store. They still had 3 but I already have a larger Ridgid shop vac.

 

[tube_guy]

It's about the markup, not the retail price. That's all they care about.

All they care about is what the customer cares about.

 

[madmax908]

Walmart Clearance $9 3D LED maglite

https://www.walmart.com/ip/Maglite-ML300L-LED-3-Cell-D-Flashlight-Black/40638501

Web site for zip code 11720 is $35.54
Rang up at self checkout at $19
Clearance stickered at $9 on shelf and had price adjusted at register.

 

[upgrading]

Got some ice melt blend for a $1 a container.
https://www.walmart.com/ip/Road-Runner-Ice-Melt-12-lb-Jug/19648714?

I like to buy 50 pound bags of calcium chloride and then fill them into the containers.

Also looked like snow shovels were half off.

 

[upgrading]

Needed some wiper fluid today.

They had a ton of the Super Tech "summer formula(32F)" out and then I noticed 1 winter formula container so I scanned it @ the price checker and it said $1.00.

Got that and was able to find one more container.

So keep it in mind if you are looking for stuff at Walmart.

 

[upgrading]

Lawn and Garden clearance is underway.

 

[2manytools]

Lawn and Garden clearance is underway.

I'd say mine is over with. Few bags of this or that, but nothing good left. WM across town had a bunch of Hypertough 20v **** marked down last week.

 

[Poe34]

Lawn and Garden ended here in NE Ohio a couple weeks ago. Not as many savings in the past, as I think they sold a lot more of their inventory due to people being home. This sprayer was the only Hypertough tool marked down at stores here, and it got horrible reviews. I grabbed one for $20 but have not had a chance to test it yet. https://www.walmart.com/ip/seort/705526715

 

[2manytools]

Lawn and Garden ended here in NE Ohio a couple weeks ago. Not as many savings in the past, as I think they sold a lot more of their inventory due to people being home. This sprayer was the only Hypertough tool marked down at stores here, and it got horrible reviews. I grabbed one for $20 but have not had a chance to test it yet. https://www.walmart.com/ip/seort/705526715

That was the only thing I was going to grab, and would want like 4 of them if I did, but still $35. Have the Ryobi equivalent, but I would like to dedicate each one to its own solution.

 

[wartee]

Picked up a Louisville Ladder Type II 20’ extension ladder yesterday for $75...was the lowest price in my area. Several stores around me had “limited stock” at $84, so this is definitely a YMMV.

The ladder itself is decent, but has resin rung locks. It’s fine for what I will use it for.

Link

Brickseek

 

[Muffduster]

Hart impact gloves all sizes on sale for $7.00. My picture shows a hanging strip, but the shelf was loaded with all sizes and they all rang up $7.00

Also, my store had all Campbell Hausfeld air tools and accessories heavily clearanced. I got a die grinder for $5.60.

 

[lolaetype]

Have you guys seen this site?

https://liquidations.walmart.com/?p=1

From time to time I've thought about bidding on one of the smaller single pallet auctions.
Then I come to my senses. What would I do with a pallet of kitchen appliances?

 

[Rickster]

Local PA Walmart clearance rack today I picked up a MagLite LED 611 Lumens (uses three C cell batteries) for $10. Model ML50L.

 

[loranger]

Not really a tool, but I picked up this air fryer for $56 at my local store. They had a whole pallet full. I almost bought the exact one from target because they had it on sale for $99!

https://www.walmart.com/ip/PowerXL-...NAIkZXJIPMQtZAOqn9waAqFCEALw_wcB&gclsrc=aw.ds

 

[upgrading]

$3 snow shovels and $1.50 ice melt at the Plaistow NH store.