welding / fab table ?

[sweetk30]

Went and got more steel today and come up with a SOLID game plan for the framework design . Pics coming sunday plan to lay it out and get ready to burn some metal !

Plan is 10inch C-channel for main frame set in 6-8 inch range around the perimeter. Then 3"x3" 1/4" wall square tube for legs. Angle for lower leg connector and shelf mount.

 

[sweetk30]

got about 85% done today .

10" c-channel 1/4" thickness . then 3x3x1/4 wall for legs .

need to do up the cross bracing for legs and shelf storage . also for me it will be a pick point for pallet jack if i need to move them . also add the feet in . and use this mag-drill a buddy let me barrow to drill and tap 4 holes in the 1" plate to secure the top to the frame . using 3/4" bolts for this job at 4 points .

at this point now were over 1,800 lbs .

 

[lis2323]

got about 85% done today .

10" c-channel 1/4" thickness . then 3x3x1/4 wall for legs .

need to do up the cross bracing for legs and shelf storage . also for me it will be a pick point for pallet jack if i need to move them . also add the feet in . and use this mag-drill a buddy let me barrow to drill and tap 4 holes in the 1" plate to secure the top to the frame . using 3/4" bolts for this job at 4 points .

at this point now were over 1,800 lbs .

Awesome[emoji481]


Sent from my iPad using Tapatalk

 

[sweetk30]

All done except waiting on a stick of 2x2x1/4wall seamless to make the receiver mounts for it all the way around .

She is tipping the scale just a hair over 2,000 lbs if you figure in the parts I am waiting for .

That's me sitting in it and my size 12 boots on . Just to give you a idea how beefy big this is . She sits right were I park it with the pallet jack .

 

[sweetk30]

No.2 prepped on top of no.1

 

[sweetk30]

No.2 is done . Now for the 4x6 tables .

 

[royce]

Those are some fine tables.
Well done Sweet.

Royce

 

[sweetk30]

Have a 60 gal air storage tank I needed to hide . So up and she went.

And it was nice to have 16ft of bench to fab the next fable .

 

[sweetk30]

Love these tables . Had to do wome work on a friends 31 ford project and needed it up in the air but weight on suspension . 1 table per axle WORKED PERFECT !

 

[sweetk30]

Got my 2" weld on curt mfg receiver hitches today . Now to layout the hitches to weld them all in place .

Yes there is 22 of them there . Got a few tables to outfit with them .

 

[lis2323]

Got my 2" weld on curt mfg receiver hitches today . Now to layout the hitches to weld them all in place .

Yes there is 22 of them there . Got a few tables to outfit with them .

Nice!


Sent from my iPad using Tapatalk

 

[yarrum]

Love these tables . Had to do wome work on a friends 31 ford project and needed it up in the air but weight on suspension . 1 table per axle WORKED PERFECT !

Great and that is exactly why I say this in another post:

"I suggest two identical tables that can be leveled. You never know when you have to build an airplane wing or something".

I since hand selected very flat 1/4" sheet from a steel un-rolling supplier and sheared it to size that can easily be removed.

 

[sweetk30]

So i went pre fab hitch units for cost and time savings and no need to gring out all that weld .

I did do a 1/2" pinch bolt on the back side bottom . Helps take out hitch play .

Made some simple mount / hitches from 2x2 tube and 8" c-channel scraps from making the frames .

These are worth there weight in gold for easy of use and position use options on the table .

 

[lis2323]

So i went pre fab hitch units for cost and time savings and no need to gring out all that weld .

I did do a 1/2" pinch bolt on the back side bottom . Helps take out hitch play .

Made some simple mount / hitches from 2x2 tube and 8" c-channel scraps from making the frames .

These are worth there weight in gold for easy of use and position use options on the table .

I went vertical receivers on my weld tables







Sent from my iPhone using Tapatalk