Whats in your big bottom drawer?

[BHH]

I have a snap on KRSC46 and wondering what is the best way to utilize the big bottom drawer. I was hoping to see how other people have used this space.

 

[luvit]

i don't like bending over.
things i hardly ever use is put in there.
hammerdrill w/ case, heatgun, things like that.

 

[ZRX61]

C clamps etc, pneumatic vac, HF *dirty* grinder that gets used to striping auto paint with those 3M pads that look like a piece of doormat on steroids.

 

[venturesomerite]

My bottom drawer of my snap on is filled with drill bits, hole saws, spade bits etc.

 

[canuckian]

Air tools, power tools, torque wrenches, and a few other odds and ends.

 

[TheFarmer]

Blow mold cases and items I hardly use.

 

[JeremyManning]

corded tools, like router, hammer drill, skill saw, sawzall, sanders etc.

 

[DaleK]

Spare grinder disks, sawzall blades, circ saw blades, etc.

 

[DrkMtnDew]

vendor hats/jackets, big tools, sprays/lubes, spill free funnel, manuals, lots of random stuff...

 

[yjWrangler]

Buffer, 2 paint guns, and a heat gun

 

[Lomotil]

The least-used and heaviest tools, spare parts, etc.

 

[Gtamazing]

books, rags and about $100,000 worth of pay studs

 

[JC23]

You never mind my big bottom...

 

[TireTracks]

1/2" corded drill, 1/3rd sheet sander,Jigsaw,Grinder,sawzall, Assorted blades, wheels,etc. I made that drawer deep specificaly for Power tools.... Too bad my Circ saw is .25" too tall.

 

[Outlawmws]

All my "engine building" tool's such as ring compressors, ridge reamers, lifter puller, ring gap filer, valve lapping paste, and tools, etc. Also my big torque wrench, timing light, vacuum and compression testers, vacuum pump for bleeding brakes and the like...

 

[diesel research]

Bunch of outdated books (old DOT regulations and 80s flat rate manuals) florescent droplight, heat gun, satellite gps tracking boxes, bunch of various diameter pipes about 2ft long, and everything that falls out of the other drawers.

Had a bunch of EMPTY blow molded cases, threw that junk in the trash can. Hate blow molded cases for most things! Space robbing hogs that just make accessing anything I use on regular basis, more difficult.

 

[gluckmysock]

3/4" drive sockets and ratchet.

 

[blacK20]

ball joint press, assortment of light bulbs/fuses/spare parts, earmuffs, extractors, ratchet straps, bungee cords. you get the idea.

 

[MoToys]

That's my catch all and last draw that has yet to be organized.

 

[Hammer1963]

Heavy slide hammer in metal box, Large size Tap & Die set, large PDR picks, 6" DA. Viking Mini Air file, Vise Grip slide hammer, Hood prop rod, Manual impact screwdriver.

 

[bobemmerich]

My corded sawzall, grinders, discs, blades. My other drawer has the compression tester kit, the serpentine belt tool,and misc. stuff I hardly use.

 

[GoBlue]

specialty tools like ball joint press, flaring tools, radiator pressure tester, scanner, pullers etc...

 

[warmpancakes]

Hammers, in the long one, the square one over to the side blow mold case stuff

 

[greasemonkey44]

3/4 socket set, propane torches, angle grinders
basically anything heavy that i dont use all the time

 

[Boiler]

Mine has power tools: sander, planer, heat gun, drill, jigsaw, etc.

 

[binkcat16]

hammers and 3/4 air hose

 

[Kevin54]

books, rags and about $100,000 worth of pay studs

You never mind my big bottom...

Let's see....paying studs and a big bottom

You guys talking toolbox or prison?

 

[Black89LX]

Compression Gauge, Vacuum Gauge, Cylinder Leakage Tester and a Fuel Pressure Gauge... extra socket rails, my knee pad, goo gone, air tool oil, and my tool truck receipts...

 

[WR250F]

Corded drill motors/saws etc
Spare batteries/chargers
Pry bars
BFH
cheater pipes

 

[KCarGuy]

Corded Drills, Old Grinder, Circular Saw, Jig Saw, Heat Gun...Just about anything with a cord attached to it.

 

[bullfrog123]

Body hammers, DA sander, paint gun, cleco set, air riveter, spark plug cleaner, etc.

 

[BHH]

Thanks so far everyone!

Bullfrog123 I like the added pic! I hope others follow suit.

 

[rayh91]

Torque Wrench, Box of Gloves, Chargers, DMM and Service Bulletins.

Surprisingly that takes up most of the space.

 

[G1GRANDEUR]

Can't remember all. ( SO compression tester, SO leak down tester, SO cooling system tester, SO torque wrenches, SO tap and die set, BP multimeter, SO ground tester, and few other things that I can't remember now)

 

[TWX]

Air stuff in one of my 26" rollaways, and the other box has weird specialty automotive tools that I don't use often, like my ring compressor.

 

[oldwino]

3/8 and 1/2" Corded drills; 7" grinder; 4 and 4 1/2" grinders that didn't get left out on the bench; couple of DA sanders, and Lord knows what else (not my go to drawer).

 

[ECP]

Even though it's not really a drawer.... here's what's in mine;

electrical bag; sanding blocks + DA in toolbox; and my shoes.