What's this tool called?

[DARK AGE 53]

The tool that holding end link bolt from turning while removing the nut, starts at the 25 second mark on this video

. Thanks

 

[bob15]

A socket and 1/4" drive ratchet.

 

[DARK AGE 53]

The end of the bolt looks like it's either square or flat on two sides, I was wonder if they made a special tool for those applications.

 

[Sonny2010]

A socket and 1/4" drive ratchet.

HAHAH yeah.

 

[Coach James]

Loks like a ratcheting box wrench on the nut and a socker/ratchet on the bolt.

Coach

 

[dlcwent]

^I'd have to agree

 

[MacmanSW20]

Its just a socket that has an allen-key type fitting on the end. I use one when I remove my endlinks as well.

 

[bob15]

If you look at the stud/bolt, you can count 3 flats on one side.....so, it is a hex bolt.

A quick google search for 5th gen Camaros shows a 7mm socket is needed for the front sway bar. The rear uses an hex wrench.

 

[DARK AGE 53]

Thanks for all the replies.