Who Needs What?

[twertsy]

Gentlemen (and Ladies where applicable),
Who needs what? I'm putzing around the shop today, inventorying and completing socket sets, wrench sets, etc. I've come to the realization that I have way too many extras of everything. 85 toolboxes, mostly full of extra sockets, drive tools, ratchets, wrenches, etc. For example, I have 6 stacks full of only sockets, 3 stacks full of only wrenches, a roll-cab of ratchets only, and so on.


So, I've decided to share a bit. If you have partial sets where you are looking for pieces to complete them, post a pic so I know what style, and I'll do my best to help you out. All I'm asking for is compensation for the ride. If you ask for a "pile" and I can help, feel free to compensate as you wish, but I'm only asking for the ride.


A quick scan of "extras," homeless tools looking for their long lost sets, tells me I have some of everything.

I'm trying to work on a couple cars, and the engine for my '70 Goat will be here within the week...…..I need some room.

EDIT: My most desirous needs are in my signature if you'd rather just trade.

Thanks!!

Todd

 

[SilverDeck]

Twertsy:

I'm looking for a Proto 3316 (1/4") ignition wrench marked similarly to the 3318 in the photo below. It was the only wrench missing from a military tool roll I recently bought.

Please let me know if you have one if your piles of extras. Thanks!

 

[ReggieR]

WOW ! I could use a Proto 5250P
Was there ever an S&K Wayne long 3/8 ratchet made ?
OOPS forgot the pic but, ironicly I found one on this forum

 

[LXCam]

What a very generous offer T.

 

[Username already in use]

Awesome! I've got a couple of things sitting around here with your name on them.
I just posted in the SK thread what I'm missing on the toolboard I picked up a few weeks ago. That post is HERE. But, it looks like you have a SK-Wayne rotomat in your signature now, so... we may be at odd on that one.
Some of my combos are SK Wayne, so maybe we can trade if needed.

 

[Toothaker]

Todd! Your man card almost went on provisionary status, but then you mention the GTO. All is well.

But isn't this something like the Smithsonian selling relics to make room for a new TRex fossil?

I'm looking for an SK 1 3/16 bullet socket 1/2" drive. Let me know if you have one.



Sent from my mobile using The Garage Journal mobile app

 

[RubiconJK]

Todd,
In addition to the Plomb stuff we have visited about before and associated threads linked in my signature line, I am also trying to fill the following sets:
S-K knurled 1/2" drive:
40138 1 3/16
40131 31/32
Also any extensions that are period correct for these.

I'm also working on some 1/2, 3/8 and 1/4 New Britain, knurled sets as well as NB None Better (trying to fill that box I found!), Husky and Craftsman BE. If you think you might have any spares of these I can put together a list to let you know what I still need.

Thanks!

 

[twertsy]

Twertsy:

I'm looking for a Proto 3316 (1/4") ignition wrench marked similarly to the 3318 in the photo below. It was the only wrench missing from a military tool roll I recently bought.

Please let me know if you have one if your piles of extras. Thanks!

You're in luck, I have an extra. PM me your info.

WOW ! I could use a Proto 5250P
Was there ever an S&K Wayne long 3/8 ratchet made ?
OOPS forgot the pic but, ironicly I found one on this forum

Those are more modern than my collection. I know for a fact I don't have any in that style. Sorry

Awesome! I've got a couple of things sitting around here with your name on them.
I just posted in the SK thread what I'm missing on the toolboard I picked up a few weeks ago. That post is HERE. But, it looks like you have a SK-Wayne rotomat in your signature now, so... we may be at odd on that one.
Some of my combos are SK Wayne, so maybe we can trade if needed.

My rotamat hasn't arrived yet (lost in USPS limbo somewhere since the 13th) but it looked like it only accepted sets with pouches, not individual wrenches. I'll see when she arrives.

 

[twertsy]

Awesome! I've got a couple of things sitting around here with your name on them.
I just posted in the SK thread what I'm missing on the toolboard I picked up a few weeks ago. That post is HERE. But, it looks like you have a SK-Wayne rotomat in your signature now, so... we may be at odd on that one.
Some of my combos are SK Wayne, so maybe we can trade if needed.

I'm gonna need a list...……

I have 3 extra 7/16 combos, but need to know which markings you want. No extra 13/16 combos, but gimmee the rest of your list.

Todd! Your man card almost went on provisionary status, but then you mention the GTO. All is well.

But isn't this something like the Smithsonian selling relics to make room for a new TRex fossil?

I'm looking for an SK 1 3/16 bullet socket 1/2" drive. Let me know if you have one.



Sent from my mobile using The Garage Journal mobile app

Sorry, the unicorn 1 3/16 sockets are all in sets.

Todd,
In addition to the Plomb stuff we have visited about before and associated threads linked in my signature line, I am also trying to fill the following sets:
S-K knurled 1/2" drive:
40138 1 3/16
40131 31/32
Also any extensions that are period correct for these.

I'm also working on some 1/2, 3/8 and 1/4 New Britain, knurled sets as well as NB None Better (trying to fill that box I found!), Husky and Craftsman BE. If you think you might have any spares of these I can put together a list to let you know what I still need.

Thanks!

See above on the 1 3/16. No extra 31/32 either. I have lots of extra NB knurled 1/2", only a couple 3/8", and a fair amount of 1/4". I have gobs of BE, and quite a few Husky knurled in 1/2" drive. Please elaborate.

 

[Miss the Pontiacs]

Twertsy
That is great of you to make the offer. If I lived closer I would be satisfied with a glimpse of your collection. Hope you don’t wear to much of a path to the post office. Have a great summer.

 

[twertsy]

Twertsy
That is great of you to make the offer. If I lived closer I would be satisfied with a glimpse of your collection. Hope you don’t wear to much of a path to the post office. Have a great summer.

Incidentally, here is a link to the engine being Dyno'd.

https://photos.app.goo.gl/pGyckLuRpzNjUBdD8

And a pic attached.

 

[Username already in use]

I'm gonna need a list...……

I have 3 extra 7/16 combos, but need to know which markings you want. No extra 13/16 combos, but gimmee the rest of your list.

Sure thing. I'm looking for SK or SK Tools branded primarily, but I'm not scared of Wayne or even Lectrolite to fill the holes...

Here's the list:
Combos:
C-26 and C-14
DBEs:
B series are long pattern, M series are short
B-1618, B-1820, B-2024, B-2224, B2628, B3032
M-1214, M1618, M2022
DOEs:
O-810, O-1618, O-1820, O-2224, O-2628, O-3032
Flex Combos:
FC-14, FC-16, FC-18, FC-20 FC-22, FC-24

Lemme know!
Thanks!

 

[d42jeep]

Todd,
You already know the special sockets I’m looking for. I could also use some wartime unmarked S-K 1/4” drive extensions or flex handles if you have extras.
Thanks,
-Don

 

[Catfishdan]

Very cool offer. I'm looking for a few things...

A plomb 4710 socket, SK 40132, 40130, and 40128 knurled sockets.

I'd gladly pony up some cash if you happen to have a pebble 1212 or a 4748 plomb ratchet.

Thanks!

I looked through your lists and I could only find 2 proto items you need. A 5326hpa spark plug socket and a 5467 breaker bar. They're yours if you want them. The breaker bar is in pretty rough shape with a lot of peeling chrome.



Sent from my iPhone using Tapatalk

 

[Packard V8]

FWIW, I'm going through the same exercise, but on a smaller scale. I just gave away several boxes full to the kid across the street starting collision repair tech school.

PM me with your list of black industrial Snap-on. I'll make you whole on those.

Also need an old school pre-'49 Blue-Point 1" combination.

jack vines

 

[RubiconJK]

See above on the 1 3/16. No extra 31/32 either. I have lots of extra NB knurled 1/2", only a couple 3/8", and a fair amount of 1/4". I have gobs of BE, and quite a few Husky knurled in 1/2" drive. Please elaborate.

Todd,
NB Husky 1/2" dr wish list
CT1216 - 1/2"
CT1221 - 21/32"
CT1226 - 13/16"
CT1232 - 1"
CT1236 - 1 1/8"
CT1240 - 1 1/4"

NB Husky 3/8" dr wish list
CB1210 - 5/16"
CB1214 - 7/16"
CB1219 - 19/32"
CB1226 - 13/16"
CB1228 - 7/8"

 

[Stuart in MN]

Incidentally, here is a link to the engine being Dyno'd.

Good man, putting a Pontiac engine back in a Pontiac. Lots of people are doing LS swaps these days...nothing wrong with doing that in a Chevy but I like seeing Pontiacs with the correct engines.

 

[twertsy]

Good man, putting a Pontiac engine back in a Pontiac. Lots of people are doing LS swaps these days...nothing wrong with doing that in a Chevy but I like seeing Pontiacs with the correct engines.

Well, it's "sorta" a Pontiac.....it's a Butler 505.

Sent from my Pixel 2 XL using Tapatalk

 

[twertsy]

Guys, I'll be back at the shop tomorrow to check your lists.

Sent from my Pixel 2 XL using Tapatalk

 

[notlob]

Here come da Judge.

 

[woody 73]

Todd Hi,

Thank you very much, I would pay whatever you are asking.

Missing a little wrench from long ago:

https://www.garagejournal.com/forum/showthread.php?t=306997&highlight=williams

Thank you so much.

woody

 

[Prichman38]

Hi,
I would love to complete this proto impact set.
Here are ones I have:

7426H 13/16
7422H. 11/16
7420H 5/8

Missing
7424H. 1/2
7418H 9/16




Sent from my iPad using The Garage Journal mobile app

 

[Snaparxon]

Hey Todd,

I'm in need of 12mm, 14mm and 15mm Par-X combo wrenches.

Snap on 9/32 drive sockets MA-7 7/32" allen socket and a MP-12 #1 Phillips with late 30's or 40's date codes.

Mac 1/4" dr deep 6mm 6 point socket

Snap on 1/4" drive deep 9/32" 6 point socket

Thanks for looking.

 

[Oldtuleguy]

Todd for president!

 

[Lookin4'67Galaxieconv]

Hey Todd, I'm looking for a 5/8" Sparta wrench, as the one in my set was just a filler.

 

[twertsy]

Sure thing. I'm looking for SK or SK Tools branded primarily, but I'm not scared of Wayne or even Lectrolite to fill the holes...

Here's the list:
Combos:
C-26 and C-14
DBEs:
B series are long pattern, M series are short
B-1618, B-1820, B-2024, B-2224, B2628, B3032
M-1214, M1618, M2022
DOEs:
O-810, O-1618, O-1820, O-2224, O-2628, O-3032
Flex Combos:
FC-14, FC-16, FC-18, FC-20 FC-22, FC-24

Lemme know!
Thanks!

I highlighted the extras I have in your post. I don't have any flex combos outside of a set.

 

[twertsy]

Todd,
You already know the special sockets I’m looking for. I could also use some wartime unmarked S-K 1/4” drive extensions or flex handles if you have extras.
Thanks,
-Don

Sorry Don, y'all have already cleaned out my wartime S-K.....

 

[twertsy]

Very cool offer. I'm looking for a few things...

A plomb 4710 socket, SK 40132, 40130, and 40128 knurled sockets.

I'd gladly pony up some cash if you happen to have a pebble 1212 or a 4748 plomb ratchet.

Thanks!

I looked through your lists and I could only find 2 proto items you need. A 5326hpa spark plug socket and a 5467 breaker bar. They're yours if you want them. The breaker bar is in pretty rough shape with a lot of peeling chrome.



Sent from my iPhone using Tapatalk

I have all your S-K Knurled (1 is Wayne, the others S-K), but all the Plomb you need are only in sets.

 

[twertsy]

FWIW, I'm going through the same exercise, but on a smaller scale. I just gave away several boxes full to the kid across the street starting collision repair tech school.

PM me with your list of black industrial Snap-on. I'll make you whole on those.

Also need an old school pre-'49 Blue-Point 1" combination.

jack vines

Jack, unfortunately, I too need the 1" combo to complete my set. I really don't collect Snap-On, only users. Most of my old SO makes it's way to the Florida Snap-On vortex.

Todd,
NB Husky 1/2" dr wish list
CT1216 - 1/2"
CT1221 - 21/32"
CT1226 - 13/16"
CT1232 - 1"
CT1236 - 1 1/8"
CT1240 - 1 1/4"

NB Husky 3/8" dr wish list
CB1210 - 5/16"
CB1214 - 7/16"
CB1219 - 19/32"
CB1226 - 13/16"
CB1228 - 7/8"

What I have is in Green. I don't have any 3/8" drive stuff from the NB knurled era.

 

[twertsy]

Todd Hi,

Thank you very much, I would pay whatever you are asking.

Missing a little wrench from long ago:

https://www.garagejournal.com/forum/showthread.php?t=306997&highlight=williams

Thank you so much.

woody

You lucked out Woody, I have one. Not in pristine condition but hey, I have it.

 

[twertsy]

Hi,
I would love to complete this proto impact set.
Here are ones I have:

7426H 13/16
7422H. 11/16
7420H 5/8

Missing
7424H. 1/2
7418H 9/16




Sent from my iPad using The Garage Journal mobile app

I assume you meant "7424-H 3/4?" I have extras of both, but they are black industrial finish. Yours if you want them.

 

[twertsy]

Hey Todd,

I'm in need of 12mm, 14mm and 15mm Par-X combo wrenches.

Snap on 9/32 drive sockets MA-7 7/32" allen socket and a MP-12 #1 Phillips with late 30's or 40's date codes.

Mac 1/4" dr deep 6mm 6 point socket

Snap on 1/4" drive deep 9/32" 6 point socket

Thanks for looking.

As stated above, most of my older SO makes it's way to FL. I don't have extras of any on your list, sorry.

 

[twertsy]

Hey Todd, I'm looking for a 5/8" Sparta wrench, as the one in my set was just a filler.

That's a tougher one to find, but I wrote it on my board. All my wrenches are organized by brand, unless they are one-offs like Sparta, Gambles, Lakeside, etc. God is the only one that could point out where those are, so I'm going to have to wait for a sign!

I do however believe I recall having one, so I'll keep an eye out.

 

[Snaparxon]

Thanks for looking Todd!

 

[RubiconJK]

J
What I have is in Green. I don't have any 3/8" drive stuff from the NB knurled era.

Thanks Todd. I'll PM you with shipping info and to see what you want for them.

 

[DadsTools]

Todd, I need a few Husky pieces to complete a combination 1/4" + 3/8" drive set with box. Criteria:

--USA
--no knurled bands
--no double dash marks (= )
--no underline under HUSKY

I need:

3/8" drive sockets: 9/16, 7/16, 3/8
3/8" drive 3" extension
1/4" drive sockets: 1/4, 5/16

Thanks

 

[theoldwizard1]

Craftsman, long pattern, metric double box end.

 

[twertsy]

Guys, just a reminder that these are collector age tools. I never pick up metric except those I need for use. I have very very few xtra metric tools. A couple s-k wrenches I saw today, that's about it.

Sent from my Pixel 2 XL using Tapatalk

 

[bonneyman]

Todd for president!

He'd get my vote!

Really nice of you to do this, Todd.
I'll have to get a list together.

 

[txlonghorn1989]

Todd,
I'm trying to complete set 4347. I've included ad though I'm not sure what year catalog it came from. I'm only missing 3 pieces - SK 1/2" drive knurled 1-1/16 socket, 1/2" drive crossbar and the toolbox for this set. Would you have any of these missing pieces?

I'm also trying to complete a set of 1/2" drive long C underline Craftsman BE knurled sockets. I can't find a list that tells me all the sockets that were in the sets. I've got the following 1-1/16, 1, 7/8, 13/16, 11/16, 21/32, 5/8 & 7/16. Can anyone tell me what I'm missing socket-wise? These are all 12-pt. I've included 2 pics of one of the BE sockets just in case there are different versions.

If so let me know what I owe you. I wish I had anything you need I'd absolutely try to help you out.

Thanks!

Mike