Probably have about $130 in them. I got 3/4 inch BC plywood for the frames and doors. I think I caught it on sell for about $22 a sheet. I was able to layout my cuts so I used 4 sheets with hardly any waste. They measure about 3ftx3ftx 13 inches deep. The hardware for them I bought chrome self closing hinges and knobs, the paint is from my local Do It Best Hardware store. It's their brand of aycrilic water based enamel in OSHA safety red. Real close to the Craftsman tool box red color. The face of the cabinets are 1x4 pine I ripped down on my table saw. I looked into just buying some but I figured I could build them cheaper and better, I enjoy wood working, and the plywood would hold up better in the humidity and temperature differences in the garage. The plywood was realativly smooth on one side. I had to fill in a few spots with wood putty and sand but you'll never notice once everything is painted. I hope to get the doors painted and screwed on sometime in the next week or so. I'll post more pictures when their done. I highly reccommend building them if you have the time and skills.
