I'm thinking it's 12 pair or 24 gloves. I base that on the stock number:
These came in. Despite me thinking they'd be clones of one another, the pictures do reflect the physical differences. The cheap one came w/a shorter pilot bit w/poor runout, it also has less meat where the set screw goes so it's easier for it to come off when inserting the bit. Despite that, the cheap one cut through 3/16" mild steel like butter. The brazing was a bit messy so we'll see how long those carbides stay in place. This is a decent deal imo if you don't care to be all that accurate (electrical box holes for instance). I might pick two more.
The 7$ one came w/two pilot bits that were longer and w/much better runout. It seemed to not cut as easy as the cheap one but got the job done just fine. I'll keep both since the cheap one needed a better pilot bit and the pricier one came w/a spare.
I picked this up to chamfer holes, it's for stone but I'll be using it on steel:
Yep, you are right - 12-pair showed up, not a bad deal.
just got these; it's indeed 12 pairs, good fit, good deal. thanks.
Are you sure that it is for 12? There is no mention of quantity in the Amazon description and the weight is .16 oz.
Yes.
Thank you so much!
If you go to the Cle-Line store and search "jobber" and sort by lowest price, there's almost every size bit you could want in packs of 12 for under $5, some as low as $1
Got the bits, thanks for reminder that they are often available!
well, looks like I'll be able to fill much of 1/3 of those vevor bit dispensers I got a while back
More of a heat barrier application I reckon; ****** tunnel, firewall/bulkhead/underhoodVEVOR Car Sound Deadening Mat, 400 mil 16 sqft Automotive Sound Deadener, High Density Foam Sound Deadener Material & Heat Barrier, Double Layer Waterproof Structure Acoustic Insulation Mat
More car insulation / sound deadening (not sure this would help much for sound) from Vevor. Its adhesive and about .4" of closed cell foam with a foil sheet on top. I couldn't come up with a use for this for normal cars past maybe above the headliner. I could see its use if you are insulating a trailer/camper/van/RV/etc though. Car audio people say closed cell foam like this won't actually help with noise, especially with a foil exterior so I'd treat it more like insulation.
16 square feet is $13.99 but there is a 20% off coupon. $11.19 after coupon.
FWIW; I've bought two plasmas and some of the better featured imports are the "bestarc", "amico" and "hynade". I got a bestarc & "ghuozi" latter of which resembles the amico. What I like about these is the integral pressure regulator on the front as well as the moisture trap being better sorted (I think it also autodrains). Some like the amico and hynade have the trap built into the chassis so it's not bound to get bumped w/something. That yeswelder is a good deal though and I believe they have decent customer support.
+1 Great price!! If I didn't need a hose, mine is good and I have a back up, I'd be all over that deal.
