To avoid these ads, REGISTER NOW!

Between 265 & 485 SQ/FT BlakeTheCarGuy’s Basement Shop

Workspaces sized between 265 and 485 squarefeet.
OP
B

BlakeTheCarGuy

Well-known member
Joined
Oct 10, 2018
Messages
9,454
Location
Roanoke Virginia
The 73 Super Beetle had a curved windshield; I don't know how someone will think it's a 73. I never had a Super but drove a couple and they seemed to drive nice.
The last owner said he thinks what happened with the previous owner is they most likely lost the title but had the title and vin for a 73 one so they made this one a 73 and it was the time before everything was computerized and said you could get away with it back then.
 
To avoid these ads, REGISTER NOW!
OP
B

BlakeTheCarGuy

Well-known member
Joined
Oct 10, 2018
Messages
9,454
Location
Roanoke Virginia
I have seen them have all kinds of issues after a blown headgasket. My buddy had one that kept blowing out radiators after doing a headgasket.
It’s had like 6 radiators put in it as well after a collision we kept getting bad ones. We talked to someone who a mechanic referred us too that supposedly studied Cherokees and he said he thinks there may have been a flawed block. He said in 2001 they used whatever parts they had laying around because they all knew they were losing their jobs so something that didn’t pass quality control would have been thrown in anyways.
 

Old Man Roger

Well-known member
Joined
Apr 6, 2017
Messages
18,497
Location
Palm Coast Florida
It’s had like 6 radiators put in it as well after a collision we kept getting bad ones. We talked to someone who a mechanic referred us too that supposedly studied Cherokees and he said he thinks there may have been a flawed block. He said in 2001 they used whatever parts they had laying around because they all knew they were losing their jobs so something that didn’t pass quality control would have been thrown in anyways.
Total guess here, but I wonder if there wasn’t a special head gasket from the factory? Like maybe they used different blocks within the same year, and the ones with certain blocks used a custom head gasket to work with the same head. Or maybe a sheet metal insert to block a port?

Id love to see the gasket compared to the block.
 
To avoid these ads, REGISTER NOW!

Prospecter

Well-known member
Joined
May 16, 2015
Messages
2,548
Location
Maine
So glad to see you start a thread! Live at home as long as you can. Such a good time to pay off debt and then contribute to retirement while accumulating funds. Little is as desirable as lack of debt. Good man.

I love beetles, too, but you are wise beyond your years. No point in tying up funds and carrying debt for a project you do not have time for.

I'm looking forward to seeing more of your projects, and tools. :coffee:
 
OP
B

BlakeTheCarGuy

Well-known member
Joined
Oct 10, 2018
Messages
9,454
Location
Roanoke Virginia
Some of you asked to see more tools. Here’s another small fraction of them. Each box has a story lol. The black tote is yard sales and eBay and the other boxes are all from the pawn shop back when we had a really good pawn shop. I’ll slowly get more pictures posted but I have so many tools it’s hard to photograph all of them haha
IMG_5512.jpeg
 
OP
B

BlakeTheCarGuy

Well-known member
Joined
Oct 10, 2018
Messages
9,454
Location
Roanoke Virginia
Had to do an emergency battery replacement on mom’s car. It was running fine and she was packing for their trip tomorrow and it wouldn’t start back up. I was on my way home and she called so I got my battery tested and it said bad cell replace. Good thing it happened at home and not at the beach because I’m not going so they would have been on their own. Normally I don’t buy anything but Interstate Batteries but Interstate dealer was already closed because it was about 7pm and Sam’s Club was the cheapest besides Walmart and I’ve never had good luck with Walmart batteries. Had to go thru a bunch of hoops to get them to take the core back because the tire and battery department was already closed but they finally took it back. Then they tried to say it won’t have a warranty if they don’t install it so dad confirmed with the manager that it does have a warranty regardless.
IMG_5966.jpeg
 

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,240
Location
Rochester, KENT. UK

Attachments

  • IMG_9159.jpeg
    IMG_9159.jpeg
    526.6 KB · Views: 6
  • IMG_9168.jpeg
    IMG_9168.jpeg
    607.2 KB · Views: 6
  • IMG_9203.jpeg
    IMG_9203.jpeg
    685.7 KB · Views: 6
  • IMG_9210.jpeg
    IMG_9210.jpeg
    642.4 KB · Views: 6
  • IMG_0958.jpeg
    IMG_0958.jpeg
    1.2 MB · Views: 6
  • IMG_0974.jpeg
    IMG_0974.jpeg
    789.4 KB · Views: 6

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,240
Location
Rochester, KENT. UK
PS. That paint is nasty.
40 grit followed by a drum sander.
Just done with stripping.
Filler and primer next.
Then some random paint.

If I Were closer, I’d be offering help.

UK is a 25 hour trip away.

Hijack over.

Unless…..
 

Attachments

  • IMG_9335.jpeg
    IMG_9335.jpeg
    877.4 KB · Views: 0

Grizz1963

Well-known member
Joined
Jan 7, 2010
Messages
12,240
Location
Rochester, KENT. UK
I wanted to start this thread to show all my basement projects and just projects in general that I do in my home shop. I don’t have a garage unfortunately but I dream of building one someday. Most of my car work is done in the driveway or under the carport. I live with my parents in a suburb of Southwest Virginia and they gave me the whole basement for my shop equipment and tools and my dog so basically everything is down here except for my room. In return for having the whole basement I also have to do all the laundry since mom and dad struggle to climb stairs these days and the washer and dryer is down here which I’m totally fine with doing laundry as that’s a very fair trade off. I actually enjoy doing laundry lol. My dad also has an office down here but he doesn’t use it anymore so his desktop computer just sits there hasn’t been used since probably 2022 so I’m going to talk to them and see if maybe I could get a iMac to put in there because I am an Apple guy.

I will post pictures of my toolboxes and shop equipment and then projects as I go along as well as new tools I get. I’ve been wanting to start this thread for awhile but I’ve been debating doing it or not because I feel like nobody will be interested in someone that lives at home still lol. I’m 24 right now. Turned 24 in April. I really want to start doing tool reviews too as I use a wide variety of brands both at home and work.

Looking forward to posting about updates and projects and especially tools. I also enjoy baseball and many other things too. I’m a Toyota tech for work.

Pictures to follow in another post when I take some pictures and get a little more organized. I’m not sure exactly how big it is it’s the size of the house I just had to pick a selection lol.

Also editing to add I’m currently trying to restore my classic air cooled Volkswagen Super Beetle too when motivation happens which isn’t often when I’m a mechanic full time lol.


I get you.

There’s an old saying “A cobblers children are always bare foot”

Once you get home, the spanners are really heavy and hot in your hands.


I hope you get around to the Beetle in time.



.
 
To avoid these ads, REGISTER NOW!
Top Bottom