Reorganization, it's like a renovation.

[Outlawmws]

No, its not! But I can't get the thing out of mind. I'm hoping if I can stall myself it'll be gone by the time I do contact the seller. Would it look weird to have a floor DP standing at each end of the 10' workbench

I see nothing wrong with having two DP's or even 3....

 

[Bob Heine]

GirlnAgarage,

Excellent work. Snap-on and Matco, eat your hearts out. Your workbench drawer project would be an end goal for must of us -- it's just a sidelight for you.

I'm happy to see you coping so well with your new life. I completely misplaced my left arm in 1965 (had it when I left for work). Every five years my wife throws a party on the anniversary to celebrate my re-birth. Wouldn't wish a disability on anyone but it certainly improves one's perspective. Even at 67 I am amazed at how few things are out of reach.

I do have a new annoyance. I started wearing a latex glove (prepping pieces of the Corvette for paint) and have a hard time getting it on. I'm thinking of using a candle or torch to burn the hair off the back of my hand -- ripping it off with the gloves is very time consuming.

If you ever run into an annoyance, PM me and I might have a workaround.

 

[GirlnAgarage]

GirlnAgarage,

Excellent work. Snap-on and Matco, eat your hearts out. Your workbench drawer project would be an end goal for must of us -- it's just a sidelight for you.

I'm happy to see you coping so well with your new life. I completely misplaced my left arm in 1965 (had it when I left for work). Every five years my wife throws a party on the anniversary to celebrate my re-birth. Wouldn't wish a disability on anyone but it certainly improves one's perspective. Even at 67 I am amazed at how few things are out of reach.

I do have a new annoyance. I started wearing a latex glove (prepping pieces of the Corvette for paint) and have a hard time getting it on. I'm thinking of using a candle or torch to burn the hair off the back of my hand -- ripping it off with the gloves is very time consuming.

If you ever run into an annoyance, PM me and I might have a workaround.

Hey thanks for the words Bob. I enjoy running into other tripods. Finally someone who gets it! I thought of you/your post yesterday. I was putting on latex gloves to pick up dog poop before mowing the yard. No, it wasn't the poop that reminded me of you, just the glove I see what you mean about them getting stuck as you're putting them on. Seems the back of my hand gets stuck too, and I'm not a hairy girl. I wonder if a splash of baby powder on your hand might help the glove slip on better instead of sticking? I don't see stopping your hand from sweating while you work though. Not sure how to get around the pain when removing the glove when you're done working.

I wonder if wearing a very thin cotton glove underneath the latex glove would help with putting on/taking off?

 

[Outlawmws]

Hey thanks for the words Bob. I enjoy running into other tripods. Finally someone who gets it! I thought of you/your post yesterday. I was putting on latex gloves to pick up dog poop before mowing the yard. No, it wasn't the poop that reminded me of you, just the glove I see what you mean about them getting stuck as you're putting them on. Seems the back of my hand gets stuck too, and I'm not a hairy girl. I wonder if a splash of baby powder on your hand might help the glove slip on better instead of sticking? I don't see stopping your hand from sweating while you work though. Not sure how to get around the pain when removing the glove when you're done working.

I wonder if wearing a very thin cotton glove underneath the latex glove would help with putting on/taking off?

Some latex gloves come powdered, but I think they use cornstarch. (Baby powder without the perfume...)

I knew a guy that wore thin cotton gloves (used for photography and clean room lab work) and put the latex/rubber gloves on over that as he had skin problems with the latex (this was before Nitril was available). the thin cotton gloves can be had cheaply on line.

Also getting the larger size latex gloves helps a lot.

 

[muibubbles]

those drawers look amazing.

 

[Bob Heine]

Hey thanks for the words Bob. I enjoy running into other tripods. Finally someone who gets it! I thought of you/your post yesterday. I was putting on latex gloves to pick up dog poop before mowing the yard. No, it wasn't the poop that reminded me of you, just the glove I see what you mean about them getting stuck as you're putting them on. Seems the back of my hand gets stuck too, and I'm not a hairy girl. I wonder if a splash of baby powder on your hand might help the glove slip on better instead of sticking? I don't see stopping your hand from sweating while you work though. Not sure how to get around the pain when removing the glove when you're done working.

I wonder if wearing a very thin cotton glove underneath the latex glove would help with putting on/taking off?

Ah, dog poop. We still get a newspaper delivered (my wife is a Luddite -- she wants the rotary phone back). The paper arrives in two long skinny plastic bags. I slide my hand into the bag, pick up the poop and turn the bag inside out while wiggling the bag off my arm -- poop is inside the bag.

I was told not to use powder or powdered gloves near paint but for the greasy work I'm going to give that a try. Little by little I'm ripping the hair off the back of my hand so it's getting easier. The sweating helps when removing the glove. I've also purchased some cotton gloves. They were cheap and are flat (like a rubber glove with no left or right) but they aren't thin. As part of my de-hoarding efforts, I thew out my collection of perfect condition left gloves about two months ago (the ones that weren't useful when turned inside out).

I admire the way your welds are turning out. Are you using shielding gas or just flux core? I broke down and bought a cheap HF flux wire feed unit last year and fabbed up some exhaust pipes. I figured $89 was a throw-away if I couldn't do it or didn't enjoy welding. Now I want to get the Eastwood MIG with the spool gun for aluminum. That should give me the ability to weld with shielding gas and even weld stainless and aluminum. Wish I had gotten into it earlier.

You are probably already aware of our special status with the Federal Government but just in case:

Title 15 – Commerce and Trade
Chapter 29 - Manufacture, Transportation, or Distribution of Switchblade Knives
Section 1244 - Exceptions
(4) The possession, and transportation upon his person, of any switchblade knife with a blade three inches or less in length by any individual who has only one arm​

Somewhere buried in the customs regulations, we tripods are also allowed to bring two switchblades into the US when returning from overseas (I bought two in Spain back in '87). It wasn't a 3-inch limit back then so mine are on the illegal side (home use only).

Before SunPass, Florida offered a special sticker that allows us to drive through toll plazas without paying (supposed to send them a check in the mail). Of course, Florida also allows everyone to eat roadkill (odd that they make a big deal about it).

 

[GirlnAgarage]

Ah, dog poop. We still get a newspaper delivered (my wife is a Luddite -- she wants the rotary phone back). The paper arrives in two long skinny plastic bags. I slide my hand into the bag, pick up the poop and turn the bag inside out while wiggling the bag off my arm -- poop is inside the bag.

Good idea recycling the bags. We get a weekly city paper. I use the paper as packing material for my orders (after I read it of course). I usually toss the plastic wrapper in the recycling bin but maybe I'll keep an emergency stash for when we run out of the doggie bags.

I was told not to use powder or powdered gloves near paint but for the greasy work I'm going to give that a try. Little by little I'm ripping the hair off the back of my hand so it's getting easier. The sweating helps when removing the glove. I've also purchased some cotton gloves. They were cheap and are flat (like a rubber glove with no left or right) but they aren't thin. As part of my de-hoarding efforts, I thew out my collection of perfect condition left gloves about two months ago (the ones that weren't useful when turned inside out).

I use to buy those cheap thin cotton gloves at the home store when we lived in Japan. It seems workers in many industries wore them so they were kept well stocked in the uniforms sections. You might find some of those seamless gloves in a similar store. The applications I see the here are marching bands and military dress uniforms. You might be able to find a 10pk online.

I admire the way your welds are turning out. Are you using shielding gas or just flux core? I broke down and bought a cheap HF flux wire feed unit last year and fabbed up some exhaust pipes. I figured $89 was a throw-away if I couldn't do it or didn't enjoy welding. Now I want to get the Eastwood MIG with the spool gun for aluminum. That should give me the ability to weld with shielding gas and even weld stainless and aluminum. Wish I had gotten into it earlier.

Thank you I'm using fluxcore. Dad gave me a little 110v Lincoln unit a year or two ago so I'm burning thinner materials with it. I know many bemoan FC but it's doing me just fine. Makes me a better weldor I guess to try and get it right. I do hope to get a 220v Mig though. I'm looking for a better duty cycle and thicker material capacity. I figured I'd still keep using FC. I'm just a DIY so the simpler the better the easier for things. As for Al, you're brave. I want to eventually try it but I don't have any illusions

You are probably already aware of our special status with the Federal Government but just in case:

Title 15 – Commerce and Trade
Chapter 29 - Manufacture, Transportation, or Distribution of Switchblade Knives
Section 1244 - Exceptions
(4) The possession, and transportation upon his person, of any switchblade knife with a blade three inches or less in length by any individual who has only one arm​

Somewhere buried in the customs regulations, we tripods are also allowed to bring two switchblades into the US when returning from overseas (I bought two in Spain back in '87). It wasn't a 3-inch limit back then so mine are on the illegal side (home use only).

Before SunPass, Florida offered a special sticker that allows us to drive through toll plazas without paying (supposed to send them a check in the mail). Of course, Florida also allows everyone to eat roadkill (odd that they make a big deal about it).

I did not know that

 

[GirlnAgarage]

those drawers look amazing.

Thank you

 

[machine_punk]

Hee hee...do you find it weird, having so many men talking about your 'drawers' in a public place?

Seriously, though...you did a fabulous job on those drawers. I was looking at cabinets of drawers to build into a larger storage unit, until I saw you building your own. Then, I decided to go ahead and build my own too, since sheet metal is 'what I do.' It is my goal to build most of my own shop fixtures/furniture myself anyway.

As far as putting gloves on 'single-handedly,' I had a thought. I put latex gloves on all day long (working in a very large E.R. in Northern California). When a doctor is getting ready for a sterile procedure, he or she needs to put on sterile latex gloves. They often have someone assist them in putting on gloves, by holding the glove out for them, which is a LOT like putting on a glove with one hand.

It occurred to me that what you need is 'someone to hold the glove open for you.' I did a quick experiment this morning and found that rigid PVC works for this application (I just happen to have a bunch of short, 4" diameter PVC pipe lying around...my guinea pigs love running through it as a maze on the floor).

So, find a rigid tube, larger than your hand size (feel free to bolt that tube to something solid).
View media item 13160
Stick the glove into the tube, as if you were just inserting your hand...
View media item 13161
But flip the 'cuff' of the glove over the outside rim of the tube.
View media item 13162
Now, you have 'someone' (a rigid tube) holding your glove open for you to stick your hand in...as your finger tips reach the tips of the fingers, they push the glove into the tube and it automatically releases the glove onto your hand...
View media item 13163
View media item 13164
And Pippi (Longstocking) hopes that her maze tube will help you get your gloves on easier...
View media item 12636

 

[mdbeck1]

...
And Pippi (Longstocking) hopes that her maze tube will help you get your gloves on easier...
View media item 12636

...and Pippi seems to have RED eyes.... Have you had her checked for rabies?


Seriously... nice idea.

 

[Bob Heine]

It occurred to me that what you need is 'someone to hold the glove open for you.' I did a quick experiment this morning and found that rigid PVC works for this application (I just happen to have a bunch of short, 4" diameter PVC pipe lying around...my guinea pigs love running through it as a maze on the floor).

machine_punk,
That's a great idea! I'll be checking the HD scrap pile for a piece next time I go there. I may even be able to use the box of 'large' gloves with that method (I rip that size to shreds trying to get them on so I've been buying extra large).

 

[GirlnAgarage]

MP, that's a great idea! I end up ripping a glove or two if I don't treat them right. THis will help - thanks!

 

[Dragster Racer]

I was scared to read. I saw a rubber glove, and then a gerbal. This can't be heading anywhere healthy.

 

[Rich H.]

Uh...and on THAT note....

Very nice work. Nice looking drawers lol....and I like the metal brake too, would like to make one like it someday.

How is the rest of the garage project coming?

 

[GirlnAgarage]

Uh...and on THAT note....

Very nice work. Nice looking drawers lol....and I like the metal brake too, would like to make one like it someday.

How is the rest of the garage project coming?

Thank you

The rest of the garage is in a holding pattern until I get the bench complete. I've got my benchtop material and a couple items temporarily being stored on the large Rubbermaid shelves that will be making an exit soon as they're no longer needed (and that is when the bench is done). That will take the next big step to getting the garage closer to done.

DH still has to get his motorcycle out for his car to come in.

Then there's a few odds and ends to clear out. Still need a shed to get the mower and ladders out. I've taken a lengthy detour with the bench. I feel a little bit guilty about that

 

[txusa03]

looks like you put alot of love into your drawers awesome workmanship!

 

[GirlnAgarage]

looks like you put alot of love into your drawers awesome workmanship!

Thank you




Decided today was as good as any to work on the final drawers. Got the corners cut and the bent up. Not certain when I can get to welding them up, painted or mounted. We're a bit slammed this month with obligations and engagements but when we can slow down and catch our breath I'll get it done.


Oh I did get my dress for the ball


Had some 2x4 scrap that was perfect

The drawers

 

[Tripp P.]

Nice drawers. Its nice to see someone else give this stuff a try. I built all mine also.

Super job

 

[rickairmedic]

I am guessing we will get pictures of our favorite GirlnAgarage and DH all dressed up for or at " The Ball " .


Rick

 

[GirlnAgarage]

I am guessing we will get pictures of our favorite GirlnAgarage and DH all dressed up for or at " The Ball " .


Rick

Only if I like the pics

 

[rickairmedic]

LOL but of course .


Rick

 

[sikopal]

Damn am I impressed, finally went back and read from the start of the thread. I don't get welds that clean with my FC with two hands. Cannot even fathom the patience and skill it would take to try to relearn with one! Cudos for sharing your story and project.

 

[GirlnAgarage]

Damn am I impressed, finally went back and read from the start of the thread. I don't get welds that clean with my FC with two hands. Cannot even fathom the patience and skill it would take to try to relearn with one! Cudos for sharing your story and project.

Thanks


It really hits home the rule of "get in a comfortable position".

 

[Red Leader]

Thank you

The rest of the garage is in a holding pattern until I get the bench complete. I've got my benchtop material and a couple items temporarily being stored on the large Rubbermaid shelves that will be making an exit soon as they're no longer needed (and that is when the bench is done). That will take the next big step to getting the garage closer to done.

DH still has to get his motorcycle out for his car to come in.

Then there's a few odds and ends to clear out. Still need a shed to get the mower and ladders out. I've taken a lengthy detour with the bench. I feel a little bit guilty about that

I wish I had that kind of patience to be able to do the bench before I got tangled up in the 1000 other projects I have going on out in the garage right now. Would have made life a lot easier

 

[GirlnAgarage]

I wish I had that kind of patience to be able to do the bench before I got tangled up in the 1000 other projects I have going on out in the garage right now. Would have made life a lot easier

Your workbench is gonna be great. You've done so much to your garage already. It definitely helped this 10' bench project that I already had a 2x4 bench to work from. Once you get it done you won't know how you survived as long a you did without one






We had a great time at the ball this weekend. Tons of people, it was crazy to say the least. To get an idea of the atmosphere imagine a huge cruise ship with several dance floors, bars, a casino, and raffles.


Attached a pic but it's only staying up on a limited time basis

 

[Vernmotor]

But But you not holding any power tools !!! LOL

 

[GirlnAgarage]

But But you not holding any power tools !!! LOL

haha yeah, I couldn't find anything to match my dress

 

[Phxphenom]

Nice pic!

 

[98TJ]

Excellent work on those drawers. I'm diggin' it.

 

[GirlnAgarage]

Thanks yall

 

[rickairmedic]

Well looky there Girl and DH all dressed up and at the ball very nice .


Rick

 

[GirlnAgarage]

Well looky there Girl and DH all dressed up and at the ball very nice .


Rick

Thanks Rick, we clean up ok

 

[cglasgow]

Attached a pic but it's only staying up on a limited time basis

Dang-langit, I missed it! I've been lurking in this thread. Great work on the drawers!

 

[Outlawmws]

SNIP


Attached a pic but it's only staying up on a limited time basis

Boy, get busy for one day and you miss out!

 

[ihredo4]

Figures that I update my computer at the same time you post a picture.ow I have another reason to hate this update. Dang nabit!

 

[GirlnAgarage]

lol You guys didn't miss too much. I'm not that photogenic anyway. maybe I'll post one of me in my welding gear one of these days.


Edit: ok, just real quick...

 

[98TJ]

lol You guys didn't miss too much. I'm not that photogenic anyway. maybe I'll post one of me in my welding gear one of these days.


Edit: ok, just real quick...

Blah, blah, blah.

I'm not hearing any of what you're saying.

Don't sell yourself short.

 

[tinbender 66]

^^^^

Ditto

 

[dsquire]

GirlnAgarage

The garage and the bench are looking great. Glad that you had good time at the ball.

Cheers

Don

 

[Outlawmws]

You look like you were having a great time girl!