John316
Well-known member
I checked it out today and the steel is pretty thin. It does have the top wide drawer, but it does not seem very deep. In my opinion it is not comparable to the the HF cabinets. Very cheap feel.
HOT DEAL Index!!
- Thread starter Stuey
- Start date
- Status
I checked it out today and the steel is pretty thin. It does have the top wide drawer, but it does not seem very deep. In my opinion it is not comparable to the the HF cabinets. Very cheap feel.
mrbreezeet1
Banned
I was hoping someone would have had the long Gearwrench metric ratcheting wrench set on sale.
Stanley tripod LED flashlight for $8. Eligible for free shipping & $5 off $25 coupon.
I bought 2 of these a while back, and while I originally thought they were gimmicky, they have come in handy over the years during power outages.
Also, PC Oscillating Tool Deal expires on the 30th.
I bought 2 of these a while back, and while I originally thought they were gimmicky, they have come in handy over the years during power outages.
Also, PC Oscillating Tool Deal expires on the 30th.
Long pattern combo, or long double box gearbox set?
www.cripedistributing.com had some of the long pattern combo sizes.
Gearbox is on sale a few places, it just starts sky high. I decided to get the EZRed flex spline ratching double box set instead, same deal though, sky high even on sale.
mrbreezeet1
Banned
long double box gearbox set I guess you would call them.
The ones with the offset box on one end and the ratcheting box on the other end.
I am guessing but about 14" long for say a 15MM
This must be them
http://www.gearwrench.com/catalog/wrenches/ratcheting/gearbox/setdetails.jsp?part=85988
Last edited:
Recoil Rob
Well-known member
I agree, I test drove Craftsmans, Kobalts and Husky's and decided the HF 13 was much better than any of them. I have all 4 within 5 miles here in western CT.
ineedtools
Well-known member
My first Wiha purchase and I gotta say I love them. I can't remember in my lifetime of holding a better screwdriver. They are truly remarkable in both fit and finish.
Hate to say it but I totally agree. For anyone not considering a used SO or MAC box the HF is impossible to beat. The guage of the new husky, Kobalt, Craftsman must be like 20 where as the HF is more like 14 in the drawers and 12 in the box and frame.
I looked at Craftman last week as they had clearance bottom boxes in the instore pickup area and one word came to mind, PATHETIC.
muibubbles
Well-known member
ENCO
20% Off & Free UPS Ground Shipping on orders of $199 or More with Promo Codes: CYBER28 and MONDAY28
this is tough cuz i need about 60 worth of stuff from them now... should i pony up some extra stuff to get the 20% off? what would you guys do! anybody ordering anything from enco?
20% Off & Free UPS Ground Shipping on orders of $199 or More with Promo Codes: CYBER28 and MONDAY28
this is tough cuz i need about 60 worth of stuff from them now... should i pony up some extra stuff to get the 20% off? what would you guys do! anybody ordering anything from enco?
Defender Chassis
Well-known member
I plan on taking advantage of the Enco deal. I need a counter bore bit for a project and im on my last bandsaw blade and am getting low on cutting fluid. Might have trouble getting to $200 though.
Cannot be combined.
Damnit, just when i 'want' an Irwin/Hanson tap and die set... but a set is only $100... must resist....
Defender Chassis
Well-known member
muibubbles
Well-known member
yeah i didnt try but thats what it said in my email
Wiha added Cyber Monday specials: http://www.wihatools.com/special_25.htm
skamp
Well-known member
I was waiting for this to be active. Was looking at the DW059b. Has been $103 for the past few weeks. It now goes up to $119 when they start this promo. Argh!!
Steve
Last edited:
i did, perhaps it was because i entered the free shipping code first? When i went to enter the 20% off it said it cannot be combined with other promotions.
SMKS
Well-known member
Maybe it won't work until Monday.
mrbreezeet1
Banned
mrbreezeet1
Banned
I was trying to tell this guy from work from the other shop, and he didn't want to hear it, because I did not have the HF box Personally.
That is the kind he wants, the big one like the husky and the HF.
He was all like Craftsman, Craftsman, Craftsman, Craftsman,
OK I told him.
Too bad about the Husky box's.
I got the 26" wide top Box at work, not sure of the model, It's from about 1995, and it is really nice.
Did sears have any middle box's cheap$$ Don't have to be anything great for my box at home.
Last edited:
mrbreezeet1
Banned
They should have just made it $100.00
mrbreezeet1
Banned
Any Idea how long the shop vac at home depot is on sale with free shipping.
I don't have one close by.
The page says "Free Shipping Online Special Valid: 11/24/2011 - 12/24/2011 "
Don't know if they mean the free shipping, or the shop Vac or both?
http://www.homedepot.com/h_d1/N-5yc...505125&storeId=10051&cj=true&ddkey=Navigation
Oh I see it says Out of stock on line.
ONLINE EXCLUSIVE
Wonder if it will come back in.
I tried to call C/S but they were closed.
I don't have one close by.
The page says "Free Shipping Online Special Valid: 11/24/2011 - 12/24/2011 "
Don't know if they mean the free shipping, or the shop Vac or both?
http://www.homedepot.com/h_d1/N-5yc...505125&storeId=10051&cj=true&ddkey=Navigation
Oh I see it says Out of stock on line.
ONLINE EXCLUSIVE
Wonder if it will come back in.
I tried to call C/S but they were closed.
Last edited:
ineedtools
Well-known member
I had everything ready to fly and then ALL the SK wrench racks were no longer available..... DOH!
how do you like their bandsaw blades? I got in on that 12" hand shear for $89 shipped a few weeks ago so they've the ecommerce thing down pretty good.
The middle boxes they had were pretty flimsy, personally I'll stick with used SO and MAC boxes myself.
At the rate of Sears I can't see the CM brand being around much longer if that's the kinda **** they're producing.
Seriously they'd have more cred if they rebranded HF boxes!
WRX/Z28
Well-known member
http://www.sears.com/shc/s/p_10153_12605_00987893000P?prdNo=7&blockNo=7&blockType=G7
Knipex 7 piece electrical tool set. $59.99+$16 shipping. Wonder if it will come down for cyber monday. Even at the current price, seems like a good deal.
Knipex 7 piece electrical tool set. $59.99+$16 shipping. Wonder if it will come down for cyber monday. Even at the current price, seems like a good deal.
Ed_EOD
Well-known member
That is a pretty good deal on the Knipex, but the shipping ($25) kills it for me. I'd be all over it if I could pick it up at the store.
Sears drives me crazy with this stuff. Their shipping costs are always excessive, and I don't understand why some things are shipped to the stores and others aren't. Why can't they just do free ship to store/pickup like other brick and mortars?
It's after midnight and still at $60 + shipping here, so I'm going to guess no go on the whole extra % off cyber monday thing on their front page.
It's after midnight and still at $60 + shipping here, so I'm going to guess no go on the whole extra % off cyber monday thing on their front page.
muibubbles
Well-known member
definitely. all my cyber monday deals are making me second guess.. id be 170ish at each place.. more than i want to spend but i still need some of the stuff from both suppliers
Refractometer
Well-known member
- Joined
- Jun 21, 2011
- Messages
- 135
On the Knipex Electrical set, I went through Mygofer.com and got free shipping with code JINGLE49. Also supposed to get 6% back for going through CashBack at FatWallet. Nice deal! Thanks!
skamp
Well-known member
SQ is the SQUAD
Well-known member
i was in HD the other day and i did see some rigid vacs shrink wrapedon the top shelf with a tag for for dec and jan ad set. it came with a free leaf blower attachment. not sure what the price is going to be but i am pretty sure its a sale.............
SQ is the SQUAD
Well-known member
got my email this morning form granger that my sk flex head 1/2 ratched is back ordered. hopefully it comes through. seems like as of yet no ones order was canceled.
I didn't get an email from them yet but i checked the site and it is still listed at the same price. I would assume that if it was a mistake it would have been removed by now but i could be wrong.
ineedtools
Well-known member
Same here but you WON'T be dissapointed, in fact I've moved all my CM screwdrivers to another drawer and the Wiha's share a drawer with my Macs now!
My Back-ordered date keeps slipping out. It now says 12/9. However, that was the 3rd one that was added that I didn't order. The other one says not yet fulfilled still with a due date of 11/20. Which was when it got ordered. One shipped though. Might have to give em a call.
The standard 1/2 should be delivered today.
Makita 12V 4-tool kit for $149
Cyber Monday Coupons List
Craftsman 40" Tool Cart ~50%-off
Anyone know of other great Cyber Monday deals?
Cyber Monday Coupons List
Craftsman 40" Tool Cart ~50%-off
Anyone know of other great Cyber Monday deals?
Last edited:
- Status