Show your new tool arrivals

[FOCUS.FREAK]

12.49 at sears

-Jordan

 

[powerstroker]

Snap on punch and chisel set on promo and warranty replacement for my 36" pry bar.

 

[abvw]

Geez, that ain't cheap

I'm thinking if I can get mid 200's for my 1/2 drive one and find a new style one for mid 300's it would be worth upgrading. Seems like those prices aren't too out there based on just looking through some old listings on ebay. We shall see though. I'm done buying tools for a few weeks regardless

I wouldn't buy a used serialized torque wrench from eBay (same with any other tools with serial number on it, liens, unknown history etc etc).. It'll **** big time when you go on the truck/call Snap-on for warranty to find out someone still owe money on it.

Sent from my Q10 using Tapatalk

 

[durallymax]

Thinking about doing the same on mine too. Cap hasn't been too bad on my 1/2" but the 3/8 isn't so good

Did you get the updated caps with the metal re-enforcement run they drive on the end? It helps, but they still seem to be finicky. My 3/8 doesn't have the dual 80 head either which *****.

Thanks, that's good to know! I'll definitely use them like I'm supposed to... I've got older/cheaper/bigger long noses to commit pliers abuse with.

They also offer the electrical installation pliers.

 

[zarbat007]

Canadian Tire had Mechanix Wear gloves on sale, picked up two pairs of Impact Pro.

Highly recommended!

 

[Caparris]

Got some more Ernst twist lock rails. Love these things

I need to order one more of the "double" tray things for my standard stuff but I've got metric pretty well covered. Also have another triple that is completely full of odd ball stuff. Torx, e-torx, hex, flex sockets, a $50 e-torx flex socket that only snap on had, etc. that isn't pictured.

The 1/2" ones are pretty tough to get on and off, but I guess that's better than the opposite

 

[theamcaddict]

Lisle LIS17892

Transmission drain pan.

Made in USA.

$13 free shipping from sears with max program.

 

[Ruger_556]

Stopped into NAPA on my lunch break...



24mm for my 3/4 set


3/4 drive shallow set


Proto SAE and Metric 1/2 drive 12 points along with some ratcheting wrench adapters etc...

 

[thefrenchcanadianguy]

Snap on 3/8 drive impact short and tall socket
(Buy one set get the second for free )

Envoyé de mon iPhone à l'aide de Tapatalk

 

[Supe]

@Ruger. Where are you ordering your Proto tools from? Amazon?

 

[rick carpenter]

Re Knipex 614 electrician pliers...

I've got that same Knipex electrician pliers, holding up nicely with near daily use. I've yet to see anything from Knipex that isn't very high quality, you'll love them.

They're really proud of them too.

Thanks y'all. I walked out of Sears with the Knipex's minus $32 and change.

 

[Luis Arturo]

A new set of screwdrivers

 

[PSDEng]

Snap on 3/8 drive impact short and tall socket
(Buy one set get the second for free )

Envoyé de mon iPhone à l'aide de Tapatalk

Is that the deal they're running this month?

 

[gsingh]

Geez, that ain't cheap

I'm thinking if I can get mid 200's for my 1/2 drive one and find a new style one for mid 300's it would be worth upgrading. Seems like those prices aren't too out there based on just looking through some old listings on ebay. We shall see though. I'm done buying tools for a few weeks regardless

Same here man. Im not gonna be buying any tools until april of next year, unless its a banging deal. OR if Zoro has their 40% off sale. Saving up for a car.

 

[MGibson]

Is that the deal they're running this month?

Pretty sure it is, iv got some comin next month to go with my 3/8 impact.
You guys have any deals with 1/2" impact socket, shallow ones were on the van today for only £60 (8mm-24mm)

(I'm a few weeks/months being over the pond)

 

[Ruger_556]

Snap on punch and chisel set on promo and warranty replacement for my 36" pry bar.

Jeez man... What'd you do to that pry bar?

@Ruger. Where are you ordering your Proto tools from? Amazon?

No, I send them too much of my money already. I usually order from Zoro Tools.

 

[90zcar]

Jeez man... What'd you do to that pry bar?







No, I send them too much of my money already. I usually order from Zoro Tools.

Yeah I'm curious to see this pry bar aswell! Ha


Sent from my iPhone 5s using Tapatalk

 

[Nortonscustom]

Stuff from the SK day event.

 

[ihateminimumwage]

...Im not gonna be buying any tools until april of next year...

Blasphemy!


(Kidding, of course. I've been selling off more tools than I've been buying lately.)

 

[rshadd]

 

[ricleh]

 

[jeffmoss26]

I like that brass hammer!!

 

[Jarhead0408]

You sir, ****. At least in terms of quantity.

That old school Snappy hammer is sweet!

 

[Stooge]

is that the PTS1000? i've been wanting to pick one up for awhile now,just havent been able to try one out before shelling out the $300 for it

 

[ricleh]

is that the PTS1000? i've been wanting to pick one up for awhile now,just havent been able to try one out before shelling out the $300 for it

Yes. I paid $200 for one and $125 for the other one. They both work just fine. I am waiting on a blade guard for one. It is on backorder from Snapon. These are really nice saws.

 

[rocco]

that brass hammer is a keeper!

 

[SquareLJ]

My first Snap-on purchase (minus my CL Classic 78). Replacing all Craftsman tools and trying to get as complete of a socket set as I can while I've got the student discount through Snappy.

 

[merbie]

Bro you need more ratchets....


Sent from the sticks

 

[Sterff]

Got my IR 2115TIMAX today! Got the impact, boot, and swivel for $195. This thing is a beast and Im glad I got it. My 1/2" is going to get dusty from sitting

 

[Ruger_556]

McMaster order came in today...

 

[GHBrumbaugh]

First delivery of today.

Sent from my iPhone using Tapatalk

 

[neonlazer]

Some new toys

 

[Deadsquiggles]

I'll have to take a picture tomorrow, but it's a brand new in the package. Armstrong 1 1/8" long combo wrench. Almost felt bad buying it for $17.50. Seller didn't know what he had.

 

[toolmutt]

Hey, ricleh. What's the number on these? (My search skills don't work too well on Snappy's site.)

 

[powerstroker]

Yeah I'm curious to see this pry bar aswell! Ha


Sent from my iPhone 5s using Tapatalk

Nothing exciting unfortunately. Just the handle pulled off while I was pulling wheels off a truck. Couldn't get it pushed back on tight after it pulled off the first time so I got a new one.

 

[ricleh]

Hey, ricleh. What's the number on these? (My search skills don't work too well on Snappy's site.)

I believe these have been discontinued. You may be able to order individual pieces. I've always bought mine off ebay. I'll check the numbers.

 

[Cope]

Got my IR 2115TIMAX today! Got the impact, boot, and swivel for $195. This thing is a beast and Im glad I got it. My 1/2" is going to get dusty from sitting

Where did you get it?

 

[ricleh]

Hey, ricleh. What's the number on these? (My search skills don't work too well on Snappy's site.)

These are no longer available from Snapon. They come up on ebay sometimes, but not very often. I've bought 6 sets off ebay in the last 10 years.

 

[RivennHewn]

Picked up the Harbor Freight shrinker stretcher combo on 50% off clearance.

They let me use a 25% off coupon.

Got the set for $85.

Here's to hoping they actually work!

 

[Sterff]

Where did you get it?

Tooltopia... They had a 10% of IR tools sale and also got the free shipping.