The computers are on spinning stands... turn them around and use it. If asked... Using the computer to access Home Depot website. If they have an issue, ask them to call corporate as that is why those computers are there like in 95% of the stores.
2018 Home Depot Clearance Thread
- Thread starter chadman117
- Start date
The computers are on spinning stands... turn them around and use it. If asked... Using the computer to access Home Depot website. If they have an issue, ask them to call corporate as that is why those computers are there like in 95% of the stores.
wastedcosmonaut
Well-known member
- Joined
- Jan 16, 2016
- Messages
- 130
Odd, the 10% more e tape rang up normal 3 dollar price at one store today. Wth.
I just found two more of the 25 pound buckets of 2 1/2" screws today and they rang up a penny without any issue. So it looks like it's ymmv.
Wrong, never do this.
Diesel Dan
Well-known member
3" green were the ones that wouldn't scan for me.
drwheels
Well-known member
Try the one in appliance. They are hid a little more.
emachado
Well-known member
evercl92
Well-known member
Minwax and similar stains, quart and smaller cans were 50% off at my depot
wastedcosmonaut
Well-known member
- Joined
- Jan 16, 2016
- Messages
- 130
Fire sale on Minwax, HD isn't going to carry it any more. Apparently Minwax signed a exclusive deal with Lowes.
drwheels
Well-known member
Milwaukee blower with 5.0 starter $112.00. Water meter lid tool pennied.
danum1aaron
Active member
Question about these penny screws.. I found two old boxes (cardboard) of #25 2 1/2 screws with the old sku number, but they still rang up as $100. What gives? Some stores just override the old sku? Even searching the price checker all deckmate screws were normal price.
EOC_Jason
Well-known member
Quite possibly... Mine had all the 1lb & 5lb boxes in the clearance section at a .00 price until they all sold. I was just lucky to find the two 25lb in the very back of the shelf that they missed.
drwheels
Well-known member
I never died see 25 pound cardboard around here. Some store play a game and reprice stuff instead of selling at clearance prices. Their favorite deal now is 00 to try to sell thru it. Milwaukee had 43 items on pca and only 2 items not at 00.
danum1aaron
Active member
One was cardboard, one was old plastic and clearly the old packaging. I think my local store simply overrode the UPC and put the item back to normal price. The UPC on the new and old don't match, but they ring up the same price.
bigdaddyisu
Well-known member
One was cardboard, one was old plastic and clearly the old packaging. I think my local store simply overrode the UPC and put the item back to normal price. The UPC on the new and old don't match, but they ring up the same price.
strange, did they swap the boxes or something? did the UPC look like they stickered on or something? i found some that i thought were pennies as well. seemed someone printed off a different sku, tapped it on there? very strange.
wastedcosmonaut
Well-known member
- Joined
- Jan 16, 2016
- Messages
- 130
They can link more than one upc to a sku. And they can change the price on an item, managers override.
danum1aaron
Active member
Nope, it was the original UPC. Items had the same SKU, but difference UPC and rang up at the same price. I don't want to blow up the thread with non-deal talk, so I'll stop now!
drwheels
Well-known member
Dewalt carbon fibre level went to $20.03
Fudge0514
Well-known member
Not sure if it has been posted in here but I didn't see it.
DeWalt MAXFIT 63 piece Screwdriving Set
SKU 1002466695
Model# DWA2SLS63ND
UPC 885911534642
$3.83
Two of my nearby locations show 2 on hand and 16 on hand, but couldn't track any down. Both locations haven't sold any since fall of 2017.
DeWalt MAXFIT 63 piece Screwdriving Set
SKU 1002466695
Model# DWA2SLS63ND
UPC 885911534642
$3.83
Two of my nearby locations show 2 on hand and 16 on hand, but couldn't track any down. Both locations haven't sold any since fall of 2017.
Attachments
Last edited:
In the past, I’ve found similar clearance items that just hanging on vertical displays in the middle of random aisles. You have to check them all, but start with the ones located near the lumber area.
Also check all the displays near the pro-desk.
If the store that’s showing 16 actually has them, they’re likely still in the box they were shipped in. Search the overhead for boxes from Dewalt and then try to locate the SKU/Model number on the box.
Also check the bigger boxes with a bunch of SKU’s (written or printed labels) on them.
Sent from my iPhone using Tapatalk
Fudge0514
Well-known member
Yep, i searched all over for them. I’m guessing they (the 16) are in a cardboard box, behind other boxes. As for the 2, who knows. Either stolen or misinventoried or something. Could have wound up in a cardboard box with other similar DeWalt bits.
JollyRogers
Active member
Picked up the Milwaukee Fuel Gen 1 Blower (2728-21) kit with the 5.0 battery and charger for 112 today. The same deal was available at multiple Home Depots in the New Orleans and Baton Rouge area.
Sent from my iPhone using The Garage Journal mobile app
Sent from my iPhone using The Garage Journal mobile app
Attachments
Purchased WAY to early!!
JollyRogers
Active member
Meh 00 pricing, didn't want to count on the price dropping more and being the old model didn't think there would be a ton of stock on hand. Was a good deal to me so I'm happy.
Sent from my iPhone using The Garage Journal mobile app
Just found this forum (might I say, I am very excited to find it)
Assuming the clearences people post will not come up on a local search,
IE: The DeWalt maxfit show full price, and multiple other I searched via the webpage.
Will the discounts show if we search or will it only show on the PCA
Thank you
Assuming the clearences people post will not come up on a local search,
IE: The DeWalt maxfit show full price, and multiple other I searched via the webpage.
Will the discounts show if we search or will it only show on the PCA
Thank you
That’s correct. The only way to look up clearance prices is to use the PCA in a store.
Sent from my iPhone using Tapatalk
Maybe for someone who hangs around HD every day... Around me, things never last long on clearance, even at 00 prices.
jwal
Well-known member
There are several different categories of members on here, and we must all learn to get along. We all choose to avoid overpaying for tools and other equipment we need, but we don't all value that to the same extent. If you have the freedom to spend an hour or two every day searching for discounts, more power to you; but there is no need to talk down to people that choose not to do that.
The premise of forums in general is to share information and help each other, not to discourage or insult people. The objective here should be to help each other save money on tools and supplies for projects. If people save money, that's great, if they could save more, by putting forth more time and effort, that's a good opportunity but it's not for everyone.
Finding the balance between time/effort and money saved is the key, and that is done on an individual basis. Let's simply do what we can to help each other, and leave it at that.
Deals or don't post please...
Thanks!
Thanks!
Mctiger1985
Well-known member
Now $13.03!
PeterT
Well-known member
99 bones
Nice, got a SKU?!99 bones
Fudge0514
Well-known member
https://www.homedepot.com/p/DEWALT-...Charger-and-Contractor-Bag-DCD771C2/204279858
Model # DCD771C2
Internet #204279858
Store SO SKU #1000113287