Sears.com hot deals and clearance thread

[captain14]

I received notification this afternoon that both of my Sharksaws were delivered. I ordered them during the F&F event last week. Everything arrived last week.

Not exactly what I wanted but I used up most of my points. Just a little to late to order the Craftsman cart @ $60.— price. Not interested in at the $89-96 price.

 

[Hexen]

I received notification this afternoon that both of my Sharksaws were delivered. I ordered them during the F&F event last week. Everything arrived last week.
...

Sounds like we ordered about the same time, then. Thanks for the report. Any day now...

 

[tabs]

anyone have some last minute suggestions for $20-40 in points that need used tomorrow? ive gone through all the low hanging tool fruit, open to different ideas at this point

 

[JackVegas]

The 84 tooth 3 piece thin profile ratchet set is on sale for 59.99 normally 99.99. That's the lowest price I've seen and I don't think it's been that low since about May.

 

[7avalon7]

anyone have some last minute suggestions for $20-40 in points that need used tomorrow? ive gone through all the low hanging tool fruit, open to different ideas at this point

US made pry bars, hammer, dead blow. Shark saws.


Sent from my iPhone using Tapatalk

 

[EOC_Jason]

The 84 tooth 3 piece thin profile ratchet set is on sale for 59.99 normally 99.99. That's the lowest price I've seen and I don't think it's been that low since about May.

$42.99 is the absolute lowest I've seen it go... Usually they drop it to $49.99 every now and then...

 

[Doohickey]

The 84 tooth 3 piece thin profile ratchet set is on sale for 59.99 normally 99.99. That's the lowest price I've seen and I don't think it's been that low since about May.

Was $38.** online, back at some point during this past summer.

 

[Doohickey]

Anyone try the Contico plastic shelving units (USA) sold at Sears stores? I can't find them on Sears.com, but the model number (3618BK5) matches this:

https://www.walmart.com/ip/Continen...Black-Ventilated-Resin-5-Tier-Shelf/186404868

Sears regular price: $39.99
Usual sale price: $29.99

 

[Doohickey]

One out of the three 90T ratchet tool sets is now available. One of the vendors must have been paid.

Though, it's only the metric version of the 1/2" drive sets:

Craftsman 23-PIECE SOCKET WRENCH SET - METRIC

 

[EOC_Jason]

That looks nice... Just not $90 nice...

One out of the three 90T ratchet tool sets is now available. One of the vendors must have been paid.

Though, it's only the metric version of the 1/2" drive sets:

Craftsman 23-PIECE SOCKET WRENCH SET - METRIC

 

[Hexen]

Bad news... as of Wed Nov 14, 2018, the free ship-to-home threshold has shot up from $35 to $59.

If you still have a nearby store available, items that can't be shipped to the store can (presumably still) be ordered in-store on the kiosk to still get free home shipping below that threshold, FWIW.

 

[captain14]

Just in time for Christmas shopping!

And the kiosk has to work. My local Kmart’s kiosk disappeared in the spring.

 

[XJPat]

Bad news... as of Wed Nov 14, 2018, the free ship-to-home threshold has shot up from $35 to $59.

If you still have a nearby store available, items that can't be shipped to the store can (presumably still) be ordered in-store on the kiosk to still get free home shipping below that threshold, FWIW.

I will add that you can not pay online at the kiosk anymore, that option seems to have gone away with the bankruptcy. You have to wait in line and pay at the register. As of yesterday, Tuesday, 13 November.
Maybe they will drop it to $25 on cyber Monday or something like that.
Sent from my KFDOWI using Tapatalk

 

[Zippercat]

Bad news... as of Wed Nov 14, 2018, the free ship-to-home threshold has shot up from $35 to $59.

If you still have a nearby store available, items that can't be shipped to the store can (presumably still) be ordered in-store on the kiosk to still get free home shipping below that threshold, FWIW.

The marketing folks at Target, Amazon and such decide to offer free shipping for at least the holiday season with NO minimum purchase. The geniuses at Sears go the opposite way, raising the minimum purchase. Once again, Sears gonna Sears!

 

[upgrading]

I think SYW members still have a $35 threshold.
Try ordering through the SYW site and see what happens.

 

[Daddy B]

I think SYW members still have a $35 threshold.
Try ordering through the SYW site and see what happens.

I just tried it. Still says $59

 

[TheLurker]

Anyone try the Contico plastic shelving units (USA) sold at Sears stores? I can't find them on Sears.com, but the model number (3618BK5) matches this:

https://www.walmart.com/ip/Continen...Black-Ventilated-Resin-5-Tier-Shelf/186404868

Sears regular price: $39.99
Usual sale price: $29.99

Can't tell if they're exactly the same as the one I bought.

I bought a set long enough ago that I can't actually remember when I bought them but it's been at least 6 years. Been through three military moves.

I keep smaller things like spray paint cans, oil and transmission fluids, and various lubes and other auto and motorcycle related stuff on it.

If I saw another set for sale I'd buy them.

 

[kasander]

Lowest price ever according to Price Tracker on the 84T ratchet set. $59.99

https://www.sears.com/craftsman-3-pc-thin-profile-ratchet-set/p-A020517920

 

[BroncoAZ]

Lowest price ever according to Price Tracker on the 84T ratchet set. $59.99

https://www.sears.com/craftsman-3-pc-thin-profile-ratchet-set/p-A020517920

It’s not, I paid $42.99 before coupons in July 2018. With coupons it was $35.33.

 

[kasander]

Thanks Bronco.

Also, if you only have $20-30 to spend and don't have a local store and don't want to pay for shipping, I usually find 3 things on this list to buy and get free shipping.

Although, this list has been getting smaller and has very few things I need on it.

https://www.kmart.com/tag?q=Saver&adcell=hp-extras-saver

 

[Hexen]

I will add that you can not pay online at the kiosk anymore, that option seems to have gone away with the bankruptcy. You have to wait in line and pay at the register. As of yesterday, Tuesday, 13 November.
Maybe they will drop it to $25 on cyber Monday or something like that.
Sent from my KFDOWI using Tapatalk

So you've done it the new way? What do they do at the register to match you up with the unfinished order? The more we know before attempting it, the better, since the odds are probably high that the cashier won't have done this before.

 

[tabs]

i ended up going with the 3 ton jack stands for 32.99 since the 4 ton are still priced ~$50ish. it irks me to no end how they jump the price on a daily or hourly basis. ahh well...free is free. 4 ton stands would do me no better than the 3 ton ones and these are in stock at a local-ish store that ive been sending all the small items w/o free shipping to. will pick up in another week or so

 

[Doohickey]

Can't tell if they're exactly the same as the one I bought.

I bought a set long enough ago that I can't actually remember when I bought them but it's been at least 6 years. Been through three military moves.

I keep smaller things like spray paint cans, oil and transmission fluids, and various lubes and other auto and motorcycle related stuff on it.

If I saw another set for sale I'd buy them.

Thanks. A friend needs some more shelves for the garage, and he's got $10 freecash to burn.

 

[Doohickey]

I will add that you can not pay online at the kiosk anymore, that option seems to have gone away with the bankruptcy. You have to wait in line and pay at the register. As of yesterday, Tuesday, 13 November.
Maybe they will drop it to $25 on cyber Monday or something like that.
Sent from my KFDOWI using Tapatalk

If you're only interested in using up some points, then you can just pay at the kiosk. For example, someone buying a $9.99 item with their $10 freecash.

Too bad the kiosk cannot bypass the "Oversized Shipping" fee.

 

[JoJoSnap]

Lowest price ever according to Price Tracker on the 84T ratchet set. $59.99



https://www.sears.com/craftsman-3-pc-thin-profile-ratchet-set/p-A020517920

Garbage. I have USA 80th ANNIVERSARY LIMITED EDITION SET


Sent from my iPhone using Tapatalk

 

[XJPat]

So you've done it the new way? What do they do at the register to match you up with the unfinished order? The more we know before attempting it, the better, since the odds are probably high that the cashier won't have done this before.

No, I was impatient yesterday and pretty much everyday of my life and left because the lines were rather long.

Sent from my SCH-I545 using Tapatalk

 

[Doohickey]

Garbage. I have USA 80th ANNIVERSARY LIMITED EDITION SET


Sent from my iPhone using Tapatalk

So, the USA ones you have used are garbage? Or are you referring to the ones now made in Taiwan?

 

[JoJoSnap]

So, the USA ones you have used are garbage?

USA STEEL > Chopstix


Sent from my iPhone using Tapatalk

 

[Hexen]

Taiwan-made tools are generally higher quality than China-made tools. The US Craftsman products are mostly long-gone, and we're trying to get deals on what is still available before the whole thing shuts down.

Speaking of which, Sears is now finalizing financing for the second chunk of cash they needed to continue operating through Christmas.

 

[btoonsis]

So, the USA ones you have used are garbage? Or are you referring to the ones now made in Taiwan?

I have the Taiwanese set... no complaints... on par with a GearWrench 84-tooth ratchet.

I'm not crazy about the wide handle... so while they're not my primary ratchets, they are low-profile so I will use them on occasion.

And, as has been mentioned, they've been on sale before for under $42.

 

[2manytools]

Last I checked, Bully Tools weren't available anymore, but I noticed today they are back albeit not free to ship. I wonder how successful one might be chatting and seeing if they might do an exception on the shipping. I bet the chat reps only found out about the change when they tried ordering for a customer today

 

[Hexen]

Last I checked, Bully Tools weren't available anymore, but I noticed today they are back albeit not free to ship. I wonder how successful one might be chatting and seeing if they might do an exception on the shipping. I bet the chat reps only found out about the change when they tried ordering for a customer today

Worth a try asking, I guess. Now if only Knipex would come back.

 

[2manytools]

Worth a try asking, I guess. Now if only Knipex would come back.

Especially now that I have to replace my "old" plier wrenches. Maybe not, it looks the new style Knipex only comes in 10", so maybe just one.

new finish
15% lighter
narrower jaws
2 extra settings size
wider opening, up to 2"
marked sizing

 

[Hexen]

Here's a little more info about how the new kiosk checkout process works, from SD:

"Hey anyone wondering why my Kiosk order is requiring me to go to the store checkout? Thanks."
"You have to click on that to get to the final steps of the order. If you are paying with all points, you never actually have to go to the cashier. I think that going to the cashier is if you actually have to pay something for your order."

 

[btoonsis]

The Craftsman 8 pc. Ratcheting Fixed-Blade Screwdriver Set is down to $21.99... if anyone is willing to take a chance.

https://www.sears.com/craftsman-8pc-ratcheting-fixed-blade-screwdriver-set/p-A029057319

And any thoughts on this?

Craftsman Magnetic Tool Organization Panel - $17.99

https://www.sears.com/craftsman-magnetic-tool-organization-panel/p-00999714000P

I'm thinking I could mount it inside the lid of my tool cart for commonly-used items (plus, I'm running out of things to buy).

 

[Hexen]

...
Craftsman Magnetic Tool Organization Panel - $17.99

https://www.sears.com/craftsman-magnetic-tool-organization-panel/p-00999714000P

I'm thinking I could mount it inside the lid of my tool cart for commonly-used items (plus, I'm running out of things to buy).

I thought those look nice if you have a place to put it.

 

[btoonsis]

I thought those look nice if you have a place to put it.

Thanks... like I said, I'm think of using it on the inside of the lid of my tool cart. I've seen some people do something similar with the free magnetic strips you can get at Harbor Freight in the "Show Us Your HF Tool Cart Mods" thread...

It's a Hot Buy, so coupons won't work... but might be a good candidate for the $10 in Freecash from Sunday's Weekly Sweeps e-mail.

 

[Poe34]

https://www.sears.com/craftsman-33-piece-screwdriver-tamper-proof-bit-set/p-00947486000P

Dang, missed it... back up to $19.99

 

[tjpavlov]

$10.99 for a three piece hex/torx set. Looks like a nice target for the $10 in freecash deals

https://www.sears.com/craftsman-3-p...lerId=SEARS&prdNo=24&blockNo=24&blockType=G24

 

[Doohickey]

The word is that Sears Holdings secured a $350 million loan.

It's like the freakin Energizer bunny. When will those batteries finally die out?