NewAge Cabinets reviews and tips

[dittle fart around]

This shows the lay out of the mounting slots for all the pro cabinets. On the product page of our website there are videos of each cabinet where you can see what the inside looks like. Scroll down the product page to get to the video.

View media item 82666
Hope this helps.

 

[Rockcam]

That is exactly what I need - thank you.

I've seen the videos, which are really well done.

Looking forward to getting this done!

 

[Justintime2]

Do the Bold 3.0 rolling tool cabinets that are now slightly smaller then the prior ones (20.75”w x 16”d x 28”h) have any mounting provisions on the back and side like the other cabinets do so they can be mounted against a wall and too each other? Also do they have mounting holes through the top to secure the bamboo work surface to if doing so? Not a fan of them changing from the standard size to these...

 

[brendelac]

They have the 6 piece set as buy one get one half off coming up at the end of the month as well. So 2 of these for $1800 which is a decent deal. I can't post the link (less than 5 posts lol) but its the $1199 6 piece set.

The 6 piece set is reduced as you referred to but the 8 piece set is also $300 off only until Dec 2. I think this is the deal I have been waiting for. Just need to decide on colour.

GRAY
RED

 

[Rockcam]

Diddle, it looks like the engineering drawing you posted for me may be for the 80" tall storage and upper cabinets only, but not the base cabinet.

Are those dimensions any different? In looking through pictures in this thread, the holes in the back appear higher than the 2ish inches shown on the drawing, and it also doesn't show the base cabinet's 32.5" overall height.

I want to be sure I don't put blocking in the wrong place.

Thanks again.

 

[pbon]

The 6 piece set is reduced as you referred to but the 8 piece set is also $300 off only until Dec 2. I think this is the deal I have been waiting for. Just need to decide on colour.

GRAY
RED

I like the gray fronts. Sides are black regardless of front color. I have 29’ of Pro and 6’ of Bold.

 

[brendelac]

I like the gray fronts. Sides are black regardless of front color. I have 29’ of Pro and 6’ of Bold.

I went with red. Never doubt the decisiveness of a coin toss.

 

[dittle fart around]

Diddle, it looks like the engineering drawing you posted for me may be for the 80" tall storage and upper cabinets only, but not the base cabinet.

Are those dimensions any different? In looking through pictures in this thread, the holes in the back appear higher than the 2ish inches shown on the drawing, and it also doesn't show the base cabinet's 32.5" overall height.

I want to be sure I don't put blocking in the wrong place.

Thanks again.

You don't need to install blocking behind your cabinets unless there are no studs. If you mount your cabinets with lag bolts into the wall studs at the top and bottom of each cabinet, even if you only have one stud available, and bolt the cabinets to each other. You will have meet the requirements to achieve the full listed capacity.

View media item 98804
This is what I have and yes it does show the base cabinets as being 30" tall. They are actually 32-1/4" tall.

I think you might be stressing a little too much.

 

[Rockcam]

Thanks.

My stud spacing is 24” OC so want to be sure I’m covered given the loaded weights involved.

 

[slammed68]

Ordered a set of pro cabinets and they showed up today. Unfortunately I dont yet have a way to unload them from the Pallet. Everything is inside of two storage cabinets, both with their doors facing inward . Not sure how to unload a 500lb cabinet from double stacked pallets without damaging it or myself.

 

[dittle fart around]

Ordered a set of pro cabinets and they showed up today. Unfortunately I dont yet have a way to unload them from the Pallet. Everything is inside of two storage cabinets, both with their doors facing inward . Not sure how to unload a 500lb cabinet from double stacked pallets without damaging it or myself.

This is why they make children, or as I like to call them helpers.

There are video's on how to unload your cabinets.

 

[slammed68]

This is why they make children, or as I like to call them helpers.
.

Yeah i dont see kids being a help here. The videos dont help either because they show the contents of the storage lockers being unloaded before the locker is removed. I cant access the doors to my lockers because they are both facing to the inside on the pallet. I called newage and they were a bit shocked but recommended getting 3 or 4 people and tipping one of the lockers over on its back. It weighs about 500lbs with everything in it.

 

[dittle fart around]

Yeah i dont see kids being a help here. The videos dont help either because they show the contents of the storage lockers being unloaded before the locker is removed. I cant access the doors to my lockers because they are both facing to the inside on the pallet. I called newage and they were a bit shocked but recommended getting 3 or 4 people and tipping one of the lockers over on its back. It weighs about 500lbs with everything in it.

I'm sorry your cabinets came front to front. Even with two extra full size helpers it's going to be a chore to spin these around. Where do you live? I'll come by to help. Please have beer and pizza available.

 

[slammed68]

No worries, it is what it is. I dont really see a good way to flip one around on the pallet without it possible falling off. Newage said that tipping it over fully loaded is the best option and to have 3-4 people to do so. Ill report back on how that goes lol.

 

[gtsgarage]

No worries, it is what it is. I dont really see a good way to flip one around on the pallet without it possible falling off. Newage said that tipping it over fully loaded is the best option and to have 3-4 people to do so. Ill report back on how that goes lol.

Good luck. These suckers were heavy. I unloaded and installed by myself but I got help getting it off the pallet.

 

[slammed68]

Had a buddy come over and we were able to tip the cabinet over on its back and get it off the pallet so that it could be unloaded. It was definitely heavy but we laid it down on a bunch of styrofoam without damage.

 

[dittle fart around]

Had a buddy come over and we were able to tip the cabinet over on its back and get it off the pallet so that it could be unloaded. It was definitely heavy but we laid it down on a bunch of styrofoam without damage.

Your pizza is on it's way!

 

[dittle fart around]

I've had a couple of customers ask about mounting the rolling cabinets directly to the wall. As you can see in this photo, From a "double" to a DOUBLE thread, you end up with some extra space because the cabinets are smaller than the fixed cabinets.

Still looks cool!

 

[brendelac]

Did costco.ca (Canada) stop carrying the Pro 3.0 Line?

https://www.costco.ca/newage-pro-series-3.0-8-piece-cabinet-set.product.100383997.html

One of the Pro sets is available again. I was wanting to buy this set, hoping to see it go on sale for $2000, but it never happened and then it was removed from costo.ca altogether so I went with a Bold set.

 

[dittle fart around]

View media item 99148
These are some of George's cabinets. He purchased the 14 piece Bold set with an extra locker cabinet on Nov 29th. So far has 3 of the lockers installed directly to the wall.

Looking good.

 

[slammed68]

Figured I should post some before and after pictures. Also upgraded the lighting while I was at it.

https://imgur.com/gallery/YSExDBF

 

[dittle fart around]

Thought I would show your pictures, hope you don't mind.

Thanks

 

[Dudebrowtf]

Just unboxed and set into place my 16 piece Pro system. Quality seems pretty good. Any experience with the SST counters getting dented easily? Material seems pretty thin.

 

[dittle fart around]

Just unboxed and set into place my 16 piece Pro system. Quality seems pretty good. Any experience with the SST counters getting dented easily? Material seems pretty thin.

Now would be a good time to send some photos, nothing works better for advertising than a nice set of pictures.

I've heard your concerns before on the stainless worktops. I tend to advise customers towards the bamboo worktops. They are laminated solid bamboo were as the stainless sets on top of a sub straight of partical board.

 

[Paycheck]

Any sales or discounts available? Need to get some for my new to me garage.

 

[dittle fart around]

Any sales or discounts available? Need to get some for my new to me garage.

No one purchases NewAge cabinets at retail. Find a set that's close to what you need and any extra cabinets to fill out your space. Add those to a quote instead of a shopping cart and I'll send you an invoice you can purchase from.

I'm a small business of one person. You can get a better price from the sets shown on Costco. They are a much larger business. They get better prices than I do.

If you don't see what you want at Costco, I'm your guy.

Thanks for supporting small business.
John

 

[casmurbax]

slammed68 very nice job. Thanks for sharing

 

[Veracis]

Thanks for posting my wall cabinets , wife loves them for pantry storage. My bench area is messy but I’m done with the installation of the cabinets and slat wall.
Only thing I need to figure out is how to get power to the workbench area - my garage wall on this side has NO outlets to begin with. =[

 

[dittle fart around]

Thanks for posting my wall cabinets , wife loves them for pantry storage. My bench area is messy but I’m done with the installation of the cabinets and slat wall.
Only thing I need to figure out is how to get power to the workbench area - my garage wall on this side has NO outlets to begin with. =[

 

[964haus]

So I'm now focusing on planning cabinets, etc for my small garage - was thinking of going the DIY plywood cabinet route to maximize the space/efficiency, but keep coming back to look at your cabinets. Have a couple of questions:
- I'm in Vancouver BC, is shipping still included?
- are any substitutes allowed? I am looking at the pro series #6, but only need 1 tall cabinet, but would like 3, 5-drawer lower tool cabinets. Is that possible?
- so you have any 3D Sketchup files of your cabinets so I can 'try' them out in my model?

Thanks!
Matthew

 

[dittle fart around]

So I'm now focusing on planning cabinets, etc for my small garage - was thinking of going the DIY plywood cabinet route to maximize the space/efficiency, but keep coming back to look at your cabinets. Have a couple of questions:
- I'm in Vancouver BC, is shipping still included?
- are any substitutes allowed? I am looking at the pro series #6, but only need 1 tall cabinet, but would like 3, 5-drawer lower tool cabinets. Is that possible?
- so you have any 3D Sketchup files of your cabinets so I can 'try' them out in my model?

Thanks!
Matthew

We don't ship to Canada. NewAge has a Canadian Website check with them for shipping in Canada.

NewAge packs smaller cabinets, like wall and base cabinets, inside the tall locker cabinets. So when you see a set with 2 lockers, it will also have 2 wall cabinets and 2 of the base cabinet variations. I don't know which set is the Pro series #6 set. NewAge no longer uses numbers to designate sets in the US.

You can purchase the set you want as individual cabinets. Because of the locker cabinet your order would ship as freight on a pallet.

NewAge offers a design service there's a link on the website, top of the page.

Hope this helps.

 

[964haus]

Thanks for the info - I've contacted the Canadian supplier, but can't see option for Platinum.

Silly question perhaps, but how hard would it be to paint the 'body' of the charcoal ones white (assuming no Platinum options in Canada)?

 

[dittle fart around]

Thanks for the info - I've contacted the Canadian supplier, but can't see option for Platinum.

Silly question perhaps, but how hard would it be to paint the 'body' of the charcoal ones white (assuming no Platinum options in Canada)?

There are no silly questions.


OK maybe there are but I don't see why you can't paint your cabinets any color you want. The Platinum cabinets have a white cabinet with platinum doors. The Gray cabinets have a black cabinet with gray doors.

Thanks for your support of small business.

 

[madmikeee]

Good lord I wish I saw this thread back when I bought mine in Nov 2018. They are STILL sitting in my other garage waiting to be installed. My new garage is 99% done, just need the compressor and to finish putting the polyurea on the floor. That will be in the spring when I can rely on more steady temps. Here in MA we have been getting days of mid to upper 40's down to the teens at random...very annoying LOL

 

[usmcHOG]

No one purchases NewAge cabinets at retail. Find a set that's close to what you need and any extra cabinets to fill out your space. Add those to a quote instead of a shopping cart and I'll send you an invoice you can purchase from.

I'm a small business of one person. You can get a better price from the sets shown on Costco. They are a much larger business. They get better prices than I do.

If you don't see what you want at Costco, I'm your guy.

Thanks for supporting small business.
John

John,
Looking to purchase a large order of Pro 3.0 cabinets to build out my garage and shop. I used the Newage design center and made some mods to their design. Gonna buy (2) 14 piece set and (1) 10 piece set from Costco. Need a bunch of other parts but can't figure out how to get it in a quote as you recommend above? All the pieces are in my shopping cart now. Can you advise so I can send it to you? Thanks

 

[dittle fart around]

John,
Looking to purchase a large order of Pro 3.0 cabinets to build out my garage and shop. I used the Newage design center and made some mods to their design. Gonna buy (2) 14 piece set and (1) 10 piece set from Costco. Need a bunch of other parts but can't figure out how to get it in a quote as you recommend above? All the pieces are in my shopping cart now. Can you advise so I can send it to you? Thanks

Continue to the checkout page and before entering your credit card information close the screen. That will send your information to me as a cancelled order.

My quote is based on my overall cost. If I quote you for the complete order 3 sets and some individual cabinets my profit will be more cause you purchased more and I can come closer to matching the Costco price on the sets. Give me a chance to bid the full order.

Thanks for your support of small business. Go 49er's

 

[usmcHOG]

OK, I'll do that. I'm assuming you're talking the checkout page on your website, shopstoragecabinets.com and not the shopnewage.com? shopnewage is where everything is currently in my cart!

 

[dittle fart around]

OK, I'll do that. I'm assuming you're talking the checkout page on your website, shopstoragecabinets.com and not the shopnewage.com? shopnewage is where everything is currently in my cart!

My website is ShopStorageCabinets.com. Pick the item and push add to quote instead of add to cart.

 

[Varty Yo]

Any hookups for older model cabinets? i have ones from prob 6 years ago and i need to match one upper cabinet for the remodel of my garage its a 26" wide 16" deep 2 door. They dont even make a 16" deep cabinet anymore.

 

[dittle fart around]

Any hookups for older model cabinets? i have ones from prob 6 years ago and i need to match one upper cabinet for the remodel of my garage its a 26" wide 16" deep 2 door. They dont even make a 16" deep cabinet anymore.

You could check with your local Craig's list for used cabinets. Good luck!