To avoid these ads, REGISTER NOW!

Show your new tool arrivals

N

nathanOH

Active member
Joined
Nov 7, 2021
Messages
44
Location
Western Ohio
Didn't pick up all of this at once but since black Friday these have been most of my additions.

Makita 18" mower with (4) 4.0ah batteries and a dual charger (XML03CM1).
IMG_20211221_201637562.jpg

Makita lantern/flashlight (DML806).
IMG_20211221_201611759.jpg

Makita 1/2" cordless impact (XWT05Z).
IMG_20211221_201552858_HDR.jpg

Makita cordless inflator (DMP181ZX).
IMG_20220105_113034297.jpg

Makita driver bit set (A-98348).
IMG_20211221_202315806.jpg

SK standard and deep impact sockets in SAE and metric.
IMG_20211221_201526928_HDR.jpg

Tekton SAE 3/8" deep socket set.
IMG_20211221_205947137.jpg

I don't have pictures right now but I also got the Tekton pliers organizer, their 10 compartment tray, and their SAE and metric wrench sets.
 
To avoid these ads, REGISTER NOW!
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,381
Location
Northern Utah
CGarage said:
$40 vs $94.

The $54 extra for neon green handles really was money well spent on those scrapers.

🍻
Click to expand...

Maybe my point was missed. I HATE the green handles and would much prefer the red but after holding a co-workers red handled Lisle scrapers I decided they felt too cheesy to me. They felt like the two halves were not matched as they were pressed together and the seam line was something a 4-year old probably could have done better. For me that $54 for a better quality tool was worth it. I could have had red handled scrapers and been pleased opening my toolbox and seeing the red handled tool but then when I grabbed it to use I would be pissed. To each their own but I felt the Matco's were a better scraper.




 
R

Renegade1LI

Well-known member
Joined
Mar 11, 2018
Messages
4,948
Location
long island ny
Qualitytools said:
Those are some large rotors there in the middle. Are you in the plumbing bis or DIY? Curious as I have been looking at redoing my old house with Uponor pro PEX.
Click to expand...
I'm a GC, we have our own mechanical company but the work we do you can't use pex. I bought the set up for my own use, between my house, my sons house, my mothers house, a couple rental properties I figured it would pay for it's self in no time. I like the expansion pex as it gives you larger diameter fittings then the crimp or cinch style, the collars are cheap & it's fast, the cinch style is ok but the the crimp style you need to check with a go no go gauge, which just adds time & maybe a leak. I pressure test every install at 120 psi to make sure & so far the expansion connections have never leaked. I use pex A seems to be the most flexible with little or no memory, also offers a certain amount of freeze protection, we have a vacation house upstate that I plan on repiping soon with pex just in case. The rotors are for a transit 250, ford finally put in decent brakes.
 
N

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
50,922
Location
Northern Central Ohio
NUTTSGT said:
Just ordered a Dewalt SDS drill bare tool and it came with a "free" 5.0Ah battery from HD.

www.homedepot.com

DEWALT ATOMIC 20V MAX Cordless Brushless Ultra-Compact 5/8 in. SDS Plus Hammer Drill (Tool Only) DCH172B - The Home Depot

Acquire a convenient tool to complete your tough tasks at the jobsite with this DEWALT MAX XR LithiumIon Cordless SDSPlus Brushless LShape Concrete Masonry Rotary Hammer.
www.homedepot.com
Click to expand...
So I picked it up last night and realized it wasn't exactly what I thought. It's SDS Plus and not a regular SDS. So after some thinking, I decided to keep it rather than taking it back.

The max drill size "should be" 5/8". I'll be using this for tapcon holes and drilling for 1/2" rebar. I have a larger Hilti rotary hammer drill that is corded for the big stuff.KIMG1576.JPG
 
S

stonesfan68

Well-known member
Joined
Apr 19, 2012
Messages
2,758
Location
Houston, TX
NUTTSGT said:
So I picked it up last night and realized it wasn't exactly what I thought. It's SDS Plus and not a regular SDS. So after some thinking, I decided to keep it rather than taking it back.

The max drill size "should be" 5/8". I'll be using this for tapcon holes and drilling for 1/2" rebar. I have a larger Hilti rotary hammer drill that is corded for the big stuff.KIMG1576.JPG
Click to expand...
SDS bits will work in the SDS+ drill. The SDS+ has some extra splines to hold on to the bits better.
 
S

Steve_P

Well-known member
Joined
Sep 15, 2010
Messages
5,182
zmotorsports said:
Maybe my point was missed. I HATE the green handles and would much prefer the red but after holding a co-workers red handled Lisle scrapers I decided they felt too cheesy to me. They felt like the two halves were not matched as they were pressed together and the seam line was something a 4-year old probably could have done better. For me that $54 for a better quality tool was worth it. I could have had red handled scrapers and been pleased opening my toolbox and seeing the red handled tool but then when I grabbed it to use I would be pissed. To each their own but I felt the Matco's were a better scraper.
Click to expand...

I've never held the Lisle scrapers, but the handles do look horribly crude in the pictures- so I haven't purchased them. Thanks for confirming how poorly the handles are made; I'll look elsewhere if I decide to add to the scraper collection.
 
N

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
50,922
Location
Northern Central Ohio
stonesfan68 said:
SDS bits will work in the SDS+ drill. The SDS+ has some extra splines to hold on to the bits better.
Click to expand...
The old Hilti I have has the larger SDS and the new Dewalt has the smaller 3/8" (I think) shank size. It's not a big deal now that I have the bits.

Typical GJ fashion, buy one tool and have to buy more as accessories. :beer:
 
To avoid these ads, REGISTER NOW!
K

KnurledNut

Well-known member
Joined
Jan 28, 2011
Messages
8,119
Location
n/a
mr.lemons said:
Spring tools centre punch.

Nicely made, and appears to work very well. Hits a lot harder than my cheap/generic auto punch, but not as quick and easy to use.

Reasonably priced on US Amazon. Shipping was an extra $7 to UK.
Click to expand...
Nice! Those are a blast to use!
 
J

Jakemedic

Well-known member
Joined
Jul 26, 2013
Messages
722
Location
Cornfields of SE Iowa
Expanding my horizons into dovetail joints. Have a number of projects that I will use dovetails on. My old Craftsman router met its demise falling to the concrete floor. Hope the Dewalt lasts as long as the craftsman did.
 

Attachments

  • FB63E0D7-763C-4FCD-859E-5A8F79267A24.jpeg
    FB63E0D7-763C-4FCD-859E-5A8F79267A24.jpeg
    447.7 KB · Views: 49
F

ForrestT

Well-known member
Joined
Nov 15, 2019
Messages
866
Location
Waldo
ecotec said:
It is a local industrial supply that bought a metric **** ton of SK back in the Facom days. Over the years I have bought a lot of it. I have found NOS Bonney, SK, Facom, Blackhawk, Cleveland Twist Drill...
Click to expand...
Just checked out their website. Looks like a great place to buy. Thanks for sharing.
 
S

Slednut

Well-known member
Joined
Dec 20, 2012
Messages
2,550
Location
Washington state
NUTTSGT said:
Got my portable bandsaw SWAG table set up today. Made a couple of templates to possibly make a replacement table insert.KIMG1574.JPGKIMG1573.JPG
Click to expand...
If you want it to cut straight take a look at how I made it so I can move the guide block.
Also please keep us updated on your new insert.
 

Attachments

  • Swag4.jpg
    Swag4.jpg
    93.8 KB · Views: 70
  • Swag3.jpg
    Swag3.jpg
    101.6 KB · Views: 71
Q

Qualitytools

Well-known member
Joined
Apr 30, 2014
Messages
2,851
Location
SOCAL
Renegade1LI said:
I'm a GC, we have our own mechanical company but the work we do you can't use pex. I bought the set up for my own use, between my house, my sons house, my mothers house, a couple rental properties I figured it would pay for it's self in no time. I like the expansion pex as it gives you larger diameter fittings then the crimp or cinch style, the collars are cheap & it's fast, the cinch style is ok but the the crimp style you need to check with a go no go gauge, which just adds time & maybe a leak. I pressure test every install at 120 psi to make sure & so far the expansion connections have never leaked. I use pex A seems to be the most flexible with little or no memory, also offers a certain amount of freeze protection, we have a vacation house upstate that I plan on repiping soon with pex just in case. The rotors are for a transit 250, ford finally put in decent brakes.
Click to expand...
Thanks, with UPONOR pex is type A, it's an international company based in Finland and that's what I have my eye on.
 
F

f121

Well-known member
Joined
Dec 8, 2018
Messages
2,075
Location
UK
New 4.4lb Adler splitting maul, apparently hand forged in Germany with a USA hickory handle (not sure I believe this, but it's a brilliant tool).
759AF85D-C158-4CE0-BC9B-9A647A18D7B8.jpeg
I think this is the sweet spot for my size/strength, it's a lot easier to swing and steer than my 8lb maul. Just split a few oak rounds and they came apart beautifully.
 
I

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
zmotorsports said:
Maybe my point was missed. I HATE the green handles and would much prefer the red but after holding a co-workers red handled Lisle scrapers I decided they felt too cheesy to me. They felt like the two halves were not matched as they were pressed together and the seam line was something a 4-year old probably could have done better. For me that $54 for a better quality tool was worth it. I could have had red handled scrapers and been pleased opening my toolbox and seeing the red handled tool but then when I grabbed it to use I would be pissed. To each their own but I felt the Matco's were a better scraper.
Click to expand...
Funny, that's how I felt with the Lisle scrapers. Coworker would rave about using carbon scrapers so I bought them but hated the feel of the handle (which is kind of important when trying to not gouge gasket mating surfaces). Realized I was back to using razorblades so sold the Lisles.

Ordered the Matco set to give it another go.(y)
 
Z

zmotorsports

ALLIANCE MEMBER
Joined
Oct 20, 2009
Messages
21,381
Location
Northern Utah
ihateminimumwage said:
Funny, that's how I felt with the Lisle scrapers. Coworker would rave about using carbon scrapers so I bought them but hated the feel of the handle (which is kind of important when trying to not gouge gasket mating surfaces). Realized I was back to using razorblades so sold the Lisles.

Ordered the Matco set to give it another go.(y)
Click to expand...

I will be interested in your thoughts on the Matco ones.

Also, if anyone has the Mueller Kueps carbide scrapers, I would be interested in their opinions as well. I am told that is who is making the Matco carbide scrapers and by looking at them as well as the packaging, they sure look nearly identical.
 
I

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
zmotorsports said:
I will be interested in your thoughts on the Matco ones.

Also, if anyone has the Mueller Kueps carbide scrapers, I would be interested in their opinions as well. I am told that is who is making the Matco carbide scrapers and by looking at them as well as the packaging, they sure look nearly identical.
Click to expand...
A quick look and it appears Titan is also selling the Mueller Kueps scrapers (standard and XL version) with a black handle. I usually would've taken the time to see who Matco sourced them from, but was a few barley pops deep and was an impulse buy after work.
 
G

guitarbutt

Well-known member
Joined
Sep 29, 2017
Messages
237
f121 said:
New 4.4lb Adler splitting maul, apparently hand forged in Germany with a USA hickory handle (not sure I believe this, but it's a brilliant tool).
759AF85D-C158-4CE0-BC9B-9A647A18D7B8.jpeg
I think this is the sweet spot for my size/strength, it's a lot easier to swing and steer than my 8lb maul. Just split a few oak rounds and they came apart beautifully.
Click to expand...
Why wouldn't you believe that's how it was made? Regardless, that handle has some nice looking coloring to it. I got an old USA maul cheap at an antique store and didn't realize how useful it is
 
F

f121

Well-known member
Joined
Dec 8, 2018
Messages
2,075
Location
UK
guitarbutt said:
Why wouldn't you believe that's how it was made? Regardless, that handle has some nice looking coloring to it. I got an old USA maul cheap at an antique store and didn't realize how useful it is
Click to expand...
I can't find it on the adler website and the head design looks identical to some Chinese ones. But honestly, I don't really care because it's a nicely made thing and works perfectly.
 
M

Mr. Tool

Well-known member
Joined
Jan 26, 2013
Messages
1,868
Just purchased this today.

Roofer's hatchet or Hammer head hatchet or? :dunno:

Anyone here know what is the proper term for this style of hatchet called?

Windchester hatchet.jpegWindchester hatchet ii.jpegWindchester hatchet iii.jpeg


 
Last edited:
  • Like
Reactions: OCD
S

Steve_P

Well-known member
Joined
Sep 15, 2010
Messages
5,182
ihateminimumwage said:
A quick look and it appears Titan is also selling the Mueller Kueps scrapers (standard and XL version) with a black handle. I usually would've taken the time to see who Matco sourced them from, but was a few barley pops deep and was an impulse buy after work.
Click to expand...

I saw the Titans a few days ago when this came up and I went searching; I wasn't sure if they were the same as the MK. The Titan handles look much better than Lisle and the price is about the same for the two pieces.
 
K

KnurledNut

Well-known member
Joined
Jan 28, 2011
Messages
8,119
Location
n/a
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom