Recent content by Bradbilt

Well. My idea came to fruition. I used 7/8 uni-strut lagged to the studs @ 3 different perlins. Then used 1-5/8 strut across the 7/8 strut. Lowes had in the plumbing isle some “swivel” connectors for 3/4 pipe and they also had

Ok. I’m back at this. Any more suggestions?

hey guys, I just a spray booth/wash bay in my building. It is a dedicated bay sectioned off from the rest of the building. 16' Wide 38.5' Long 16' Hight white metal wall liner I would like to make something that I can hang truck/tractor parts when painting. Something about 8' from floor level...

The way I looked at it was like this. I'm going to do this ONCE, so lets do it Right without question. 3/4 of it is in the walls, and really dont even want to have to rip a wall apart for a leak I went with 3/4" L Ran a main trunk line the length of the shop with it pitched from the center down...

Ok, thanks guys. I'll look for some 1/4"stuff

Ok guys, I got a question for you. INSIDE my WASHBAY/ spray booth I have wall mounted 4' vapor proof lighting on the walls. The 4" junction boxes are flush mounted inside the walls. The gasket that comes with the covers is not thick enough to compensate for the small ribs between the large...

And that is what I need to find out I am looking at this https://www.crutchfield.com/p_049RVM20/MB-Quart-RVM2-0.html?omnews=16908829

yeah, it is a brand new garage, trying to keep up with technology a lil bit AM/FM works for me. No need for anything fancy, just trying to stay less cluttered. A friend of mine just suggested that. I'm going to have to look into that I am also going to need some sort of exterior antenna...

Guys, I'm looking for a radio receiver, but all I keep finding are receivers for what look like a 70s home "stack". I am looking for something that could be mounted to the wall(or in the wall for flush mount) and the ability to run 4 speakers. Am I really asking for that much? I keep finding...

Thank you. That sound MUCH more reasonable. Mine is all on one level so i would think even cheaper since it is easier

Sorry guys it has taken me so long to get back 1250sq/ft of ceiling 8' off ground for sheetrock 1350sq/ft of the upper 10.5' of wall for sheetrock so 2600sq/ft of area Was going 5/8 on ceiling for fire resistance and take more abuse that the 1/2 since it is a lower ceiling I was going 5/8 on...

Not sure how long ago that was but now it is more like $60 per sheet

Sorry, typo $45 a sheet

Ok, guys. Looking for ideas for inside wall ideas My plan was do 5/8" plywood 4' up from my 20" concrete stem wall and 5/8" sheetrock from there up. The problem is I just got a quote for sheetrock for $8000 and I know the plywood is about $45 a sheet and I need about 25 sheets I do NOT want to...