Recent content by Certified

  1. C

    Schumacher 145 Turbo MIG welder

    Hello Everyone, I got this Schumacher 145 turbo MIG (model 90441) welder from a an auction, it is missing the welding Gas Nozzle and the tip is damaged, i need some help identifying what nozzle would fit, from the research i did it looks like i need a screw on European style nozzle, i can't...
  2. C

    Need help with a Miller S32S Welder.

    so this is not a welder? why does it have a welding gun connection and gas connectors then?
  3. C

    Need help with a Miller S32S Welder.

    Hello guys I got this Miller S32S wire feeder welder for $5 from a local Auction, let me start by saying that I have almost no experience with welders and I am puzzled about how to connect this thing to power, I downloaded the manual and read it but it does not cover how this welder get power...
  4. C

    Unknown Made in Japan Impact Wrench

    hello, thank you for the reply, do you have any idea about what is the ideal air setting for this gun, I know most air tools are set to work with 90PSI. but since this is not your regular craftsman, I am not sure how to set it up. and I just can't find any info online, if this is a 30 years old...
  5. C

    Unknown Made in Japan Impact Wrench

    not sure if the original color was green, I am planning to give it a good clean and try to repaint it, I wish I knew what was its original condition.
  6. C

    Unknown Made in Japan Impact Wrench

    Hello everyone, I picked this 1" heavy duty air impact wrench from a local tool auction for 5$ :D and let me tell you guys this thing is a BEAST, and is super heavy, I bought a 1" to 3/8" reducer to be able to use it with my air hose, I am using Milton H style 3/8" plug with 1/2" air hose, and...
  7. C

    Saylor-Beall Rebuild

    Re: Should I buy this Saylor-Beall? I wont offer more that 120$, good luck finding parts and a 3 phase convertor, here is the rule: NOT working = Junk, unless you are a restoration guru, plus you are buying it to use it not to put it in a museum.
  8. C

    HVLP spray guns Cleaning

    alright it took me 3 hours soaking and scrubing ONE gun, and let me say that the **** that came off is filthy it looks like one of those guns was used for priming, the container that i used turned all gray and still i had to scrub big time to get the hardned material out, who ever had these guns...
  9. C

    HVLP spray guns Cleaning

    Hello everyone, I just came back from an equipment auction and i brought with me a box full of automotive equipment and tools, and 5 HVLP spray guns, Devilbiss, SATA, Binks..etc wich i am happy about because these guns are crazy expensive, i got the whole box for $175. Now, these guns need...
  10. C

    Ingersoll rand Compressor wiring question

    i dont think i will ever need a heavier gauge than an 8AWG, my compressor required a 10AWG only but i used an 8 just because most heavy duty tools under 220V will not go over 8 gauge thats why i didnt bother with a 6AWG, the only thing i would think of is a welder, but i already have one. the...
  11. C

    Coupler "Types" and air hose sizes.

    i just can't find any high flow milton products , the only ones i found were "P" "G" and "H" "V" style as was suggested are simply impossible to find where i am. they have to order them and it will take 2 weeks at least before i get them, i checked ebay same thing not a lot of choice there...
  12. C

    Ingersoll rand Compressor wiring question

    the opposite would be true, since the motor was a 21amp only i was required to put a 30amp receptacle / 10awg / and 30amp breaker by code, but i used a 50amp receptacle, 8 awg and a 30amp breaker. as long as it meets or exeeds code requirement nothing is wrong. at least i know that my wires...
  13. C

    Coupler "Types" and air hose sizes.

    Alright, so i got my new compressor hooked up, now what! lets try the beast :) not too fast cowboy we got another problem, the compressor air outlet is a 1/2" opening with a shut off valve and a 3/8" bushing to accomodate a 3/8" coupler. hmmm!!! i went to the canadian Harbour freight (princess...
  14. C

    Ingersoll rand Compressor wiring question

    alright guys i finished wiring my compressor, so i finally i ended up putting a 50amp receptical and plug, 8/3 wire all the way to my panel, and 30amp breaker, and it works like a charm :) i changed the pressure gauge, the one that came with the compressor was not working. and i am pretty happy...
  15. C

    Ingersoll rand Compressor wiring question

    ok guys, major change here, i finally gave up on ingersoll rand people, they got no stock and do not reply to emails, i am pretty disappointed on these people, so instead i got this speedair compressor: it is a 60 gallon, 2 stage, 1 phase, 5HP according to the manufacturer BUT here again...
Top Bottom