mbatarga's latest activity
-
Mmbatarga replied to the thread Ridgid tools good still?.I converted to Ridgid over 10 years ago and have about 20+ tools that run on their 18V platform - including yard blowers and woodworking...
-
MToday I repositioned the Low-Off-High speed switch on my HD floor fan from being in the back center to the top edge of the fan. I can't...
-
-
Mmbatarga posted the thread Hex bit shank conversion from straight shank to retained in General Tool Discussion.I have a set of 7 hex shank bits that are nut driver style. The issue was they are straight shank and fall out of the driver whenever...
-
-
Mmbatarga replied to the thread My 4" x 6" bandsaw mods.I've considered trying a screen door closing mechanism - or maybe a commercial version - and see if I can work out the orientation and...
-
MNice mods thanks for sharing. I did similar to the vice arc as it binds up... I looked into some down feed methods, they typically cost...
-
Mmbatarga reacted to Beerhippie's post in the thread Socket for larger eye bolts/lag eyes? with
Like.
I grind three flats on the threaded portion to fit the jaws of the chuck. Also works great for rebar tie wire. -
MGet another "J" hook, either lag or machine thread, and cut off the thread portion. Then mount it in your drill / driver, select low...
-
MI've had my Enco bandsaw for about 2 years - bought it at an estate sale. It was in great shape and maintained well, but like the others...
-
-
Mmbatarga posted the thread New and some slightly used large taps - 1" x 8, 7/8" x 9, 3/4" x 10 in Classifieds.I've got several taps of each size - typically a taper tap and bottom tap for each of these sizes: 1" x 8, 7/8" x 9, 3/4" x 10 These...
-
-
Mmbatarga replied to the thread Recent vintage Craftsman Lathe purchase ....I did further cleanup and inspection and found the idler pulley bushing was worn - so a quick trip to my local Ace and $4 I got a...
-
MI went to a local estate sale that I saw on the EstateSales.NET app Friday. Lots of "junk" and most of the power/hand tools were older...
-
-
Mmbatarga posted the thread Craftsman 335.19595 Chisel and Tool sharpener accessory for bench grinder in Classifieds.For sale is a vintage Craftsman 335.19595 Chisel and Tool sharpener accessory for a bench grinder which is in great shape! It came...
-
-
Mmbatarga reacted to tool_scrounge's post in the thread FS: Delta Rockwell hand wheels, 2 for $14 with Like.
Need some crank handle for a project? I am selling two Delta Rockwell table saw hand wheels. These came from an older tilting arbor...
-
Mmbatarga replied to the thread let's see your craftsman block grinders.No - just NM romex. But it must be rather old based on google information. The box could easily be from the 60's or 70's based on the...
-
Mmbatarga replied to the thread let's see your craftsman block grinders.I went to an estate sale today and picked up the items below. I was curious about the price - but not very serious about the Craftsman...
-
