Recent content by snapon12

I picked up a nice sander very cheep today. It appears to be well taken care of, but it's missing the belt fence. I was wondering if anyone has this sander and could take some pictures and measurements so that I can make one for my sander. Thank Fish Sent from my SM-N960U using Tapatalk

Drivesithard I would start small and possibly use 1/4 them 1/2 them the 7/8 hole I would use some lubricant like Milwaukee hole hog or your favorite type. Fish Sent from my SM-N960U using Tapatalk

I got most of it with the other vice I was working on. Is there a photo size limit on garage journal? Sent from my SM-N960U using Tapatalk

Those are both very good ideas. Sent from my SM-N960U using Tapatalk

What is the best way to straighten up the handles that are bent?

I need one for 3mm. I will be drilling into /tapping plastic. Trying to to reduce the hand / drill tap work. Sent from my SM-N960U using Tapatalk

Dose anyone have experience with the auto tapping device sold on Amazon? Accusize Industrial Tools 0-1/4'' Self-Reversing Tapping Head, Jt6 Jacobs Taper, 2600-4002 https://www.amazon.com/dp/B00PWCXRVA/?tag=atomicindus08-20 Sent from my SM-N960U using Tapatalk

Will these hold up OK for normal use? I can't seem to find anything about this company Sent from my SM-N960U using Tapatalk

Thank you. Ive been reading up it appears that little giant was not to popular. Sent from my SM-N960U using Tapatalk

I pick up a little giant vice and the person who had it removed all the paint. I have a customer who dose professional powder coating who offerd to coat the vice for me. Is it a mistake to coat it? Thanks Sent from my SM-N960U using Tapatalk

I wound up with a j33 chuck and a 2mt33 arbor, which uses a t6 chuck. Next step is to get a autotap Sent from my SM-N960U using Tapatalk

Very nice work. Sent from my SM-N960U using Tapatalk

Well I pulled the chuck and Im taken it to the local machine shop supplier. Hopefully they will be able to hook me up with a new chuck or key or both. Sent from my SM-N960U using Tapatalk

This is the model and serial number plate. I would not mind replacing it with a new chuck if possible. Sent from my SM-N960U using Tapatalk

Dry clean fine steel wool should work the glass must be dry also. To help remove the overspray. In the late 80s I did paint and body work and that's how we removed over spray. I would test it out in a small area to be safe. I've not tried it on any new auto glass. Sent from my SM-N960U using...