Search results

Looks as if my solvent based rustoleum w/clear is holding up well compared to yours. Been 5 years and counting....

Those shingles look like their cut too tight to the edges of the skylight too. Crickets are great, or a backpan to shoot water one way, most shinglers can't make them, or make custom flashing period. Make it watertight by design.

I've installed these suspended in open ceilings. The tabs on the back have holes, I hung them from jack chain and dropped my bx down the chain from the deck. Not my design. I've also hung from aircraft cable

On another note. I would put in minimum 10' high doors.

Do your best caulk the rest ?

Clear gravel like that won't lock together. Doesn't need too that's why they use it. 3/4 crusher run packs tight with a plate but its more work. That's why they use clear, less work. Is the subgrade virgin & dry?

grass is green where you water it. The more you make, the higher the cost of living is, etc. Its relevant

yeah hire scabs that will come back one your building is up and clean you out.

60 cents a sq ft. Yep guys up here want $2-5sq ft to finish concrete, depending on the project And that's cash. Gotta stop comparing your US prices to prices up here. my 1 car house garage is 12x26 and I got quotes from $800-$2000 to pour/finish. I just did it with my brother in law.

That work is seasonal up there too. $18k. It's a lot of work, equipment, and labour. Plus they're doing the job probably turn key. Get a couple other quotes, no one on here can give you a quote unless they're a local concrete contractor and do a site visit. Minimum wage here is $14, and...

HD & lowes near me have decent wood.

Cycle stop valve

Anyone ever seen anything done in corten? Not the material for someone who is scared of paint fade or rust. SS double lock roofing should not have any exposed fasteners, or rely on caulking. It should be water right by design. Installation methods are everything.

The epoxysheild solvent clear does a great job giving a uniform appearance. Just be very sure you don't miss any spots, and try to roll it on generously. Also the kits don't seem to yeild as much sq footage as listed.

Yeah its 26ga double mechanical, all hand seamed using seamers but other areas were seamed using hand tools. Coil came from Havelock metals, they show up with the equipment and roll the panels all at once on site. Its expensive equipment from what I understand. The roof took 9 months due to...

A lot of double lock mechanical is 26ga, 24ga is too hard to work to double lock in detail areas This is a double locked dormer/ridge. 24ga wouldn't be doable as the folds get too thick with all the layers. Also a chimney and cap built from scratch. Actually all the parts were from scratch on...

I had one fall off a 2 post. Car was totalled, nothing lined up after, no injuries though.

Fence first. There's a reason paving is done last.

Sawzall or jig saw. Throw away the blade after

No you cannot. Same breaker, same circuit still no. Neutral needs to be in the same cable/conduit controlling the device which your switching.