Search results

The tank sits at about 32degrees which for argon\co2 mix should be plenty. The reason for the unconventional cart is so that it can slide under my workbench. Ammo can should come in handy. :bounce:

About 1 out of 10 times when starting my 2008 Ford Ranger 2.3 with 46k miles the engine has to turn over a few times before it starts. It normally starts on the first crank. Its the original battery which I had tested by the auto parts store with one of the nicer Midtronics testers. It tested...

I have been looking out for one of these for a while. I found one for $95 shipped. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330483782584&viewitem=&sspagename=STRK%3AMEWAX%3AIT

$179 shipped I recently purchased the 299pc socket set from Craftsman and really have no use for the SAE stuff. I figured some of you on here might be interested. This is every SAE Socket that Craftsman makes. 6, 8 and 12 point. I am not looking to make any money. I spent $337.74 on the...

I know about the legality, I'm more concerned with safety as this is what was already here. 220v breaker was run from main panel that is already in the garage. the circuits alternate so there are 2 -20amp 120v circuits (outlet) off each leg. but I see the neutral also goes to the ground of...

So I moved out of the shop space I had to get an apt with 2 car garage closer to the new job. This is the old space; http://www.garagejournal.com/forum/showthread.php?t=24538 The new place is quite a bit smaller and shorter but its downstairs and its insulated and it has a AC (I live in South...

http://miami.craigslist.org/mdc/bfs/1766593418.html this is not mine. i would take it but I need something about twice as long for what I'm trying to do.

Craftsman Heavy-Duty tool storage is the perfect tool organization solution at home or work. This 40" wide top chest provides over 40% more storage capacity than a standard 26" wide tool chest. * 16,362 cubic inches of storage * All steel construction with Craftsman exclusive I-Frame®...

A few GearWrench Ratchets with Matco 88 tooth internals HF toolbox some toptul wrenches that i had been wanting for a while some GW wrenches I got during the crazy clearance and a couple of Wera and Knipex goodies

I guess the information on which ratchets can be upgraded with Matco internals is not known to everyone so I'll share what I know for certain. GearWrench 81211 3/8-Inch Drive Full Polish Teardrop Ratchet and GearWrench 81215 3/8-Inch Drive Full Polish Flex Head Ratchet The two above...

I made a pretty nice sized order and right after I place it the site is down. :headscrat

I bought about a year ago. Its been used for doubling my parking mostly so I can stack my miata's. The lift I guess is about 3 years old now. Its the old version of this; This is a pic of it in my shop. $1200 Firm I am located in south florida

$100 you can see the condition :D

was on craigslist for $800 a while back so I was like no way... they emailed be back and said they want it out this weekend and would take $300 which sounds like the right price to me... :D this will be getting the shadowing foam treatment

So here is a friends spare stator cover before. Mind you this is the one in better shape, the one on the bike looks WAY worse. This is the first time I have ever powder coated anything. I didn't even have the oven hooked up till tonight. I media blasted the part with aluminum oxide...

Parts list HF 20Gal Parts Washer 3 gallons of Orderless Mineral Spirits 2 feet of 1inch I.D. hose Mr. Gasket 7693 Remote Oil Filter Mounting Bracket Movers Dolley to take casters off of 2x2 square tubing 11gauge 3/16 angle melamine scraps plywood scraps 2 buckets 3x8inch pvc compressor hose...

I know it's ugly... but I got $10 into the base in the form of casters and the rest of it were scraps of wood I had.

You may have seen this thread;http://www.garagejournal.com/forum/showthread.php?t=25958&highlight=shadow+toolbox Well I was not thrilled with the Styrofoam so I kept looking for a cheapish alternative. And I found the mats that Sears sells to place in front of workbenches and the like. It was...

It's about 2x8 surface area Aluminum angle front edge 1.5 inch thick top 43inches tall Just made this tonight. About $50 in steel. and about $70 at Home Depot for; - two 2x4x.75 MDF sheets - one 4x8 melamine board - one 1.5x1.5 aluminum angle - one 2x4x96 stud I already had most of the...