Search results

It looks like the install manual doesn't specify anything other than insulated ducting. Given that you're inside your thermal envelope I don't think it makes a difference, I doubt there will be enough of a temp delta to have condensation issues. If so you can retrofit more insulation around the...

Are these ducts inside your thermal envelope?

EVR/HVR is where you need to look. Bring fresh air in and exhaust the stale air. You put the supply into the living spaces, living room, bed rooms, etc etc, and draw the old air out of the kitchen, bathrooms, laundry. And it needs to be balanced. Zehnder is the name at the top of the pile to get...

These guys have good info. https://buildingscience.com/

JKinAK, thanks for sharing that information. What you're describing isn't the situation we have. We have probably 1000' of road frontage, however since we haven't settled on where our driveway will go, why cut it in when we have an acceptable intermediate solution?

No microcenters close. I'd probably just order from Bambu US. Couple nights ago filled the shopping cart, just couldn't pull the trigger.

I'd like it to be smooth enough that I don't think "look at those layers" every time I pick something up. I don't expect injection mold smooth, though I'd be interested to know close one can reasonably get. I like that the X1c w/AMS is a complete package and from what I read it works very well...

I started looking into 3d printing after my son got into lego trains, and the total lack of variety (and high price) of track pieces. Hard to justify a printer for that, but after stumbling across the gridfinity organization method for shop organization, it might be time to take the plunge. I...

I think we've decided on a path forward. I got talking with a future neighbor originally about his shop building, but we moved on to his tractor and he commented that he's often worried about rolling over while he's out working... hmm. Our lots have similar topography. After talking financials...

We're in the foot hills south of you, but probably at a lower elevation. Our neighbor used Borga, and their website has a building visualizer that you can mock up a building in, then submit it for a quote. I did it for a 40x60 with a lean to and mezzanine, just to see what the ball we were...

Love the windows. Looks like it's a nice space to work in.

Sorry guys, didn't mean to neglect all the comments. The summer went sideways in a most unexpected way, but I think we're getting back on track. We had the area around the well dozed. That has made access and initial site layout much nicer. Found a guy to mow with a skidsteer and mower, hired...

No worries bombshelter, that's the beauty of GJ. Collective knowledge.

Thanks for the replies. Let me clarify the access issue, or non issue. There are 8, 10 ac parcels being sold of, we're the only ones on our side of the road so far, and our access currently is the trail cut in by the well drillers. No interested parties in the parcel that we're driving on...

My wife and I have purchased 10 acres in the Sierra foothills in California. We're looking at options on how to do some clean up and initial work for an eventual house/shop etc etc etc. A crew sponsored by a Calfire grant went through a few years ago and cleaned out nearly all the brushy stuff...

That manual should be helpful. Your oil pressure is adjusted by the bolt assembly on the left, by the red cap. 20psi would be good to start but check the manual.

http://vintagemachinery.org/mfgIndex/detail.aspx?id=1744&tab=3 See if you can find your model here. I think there its likely its 220/440 3ph, but they did make grinders in 1ph, 2ph, and 3ph, in 110-550v.

You really know how to make conduit look ****. Might have to rethink using them in a future build.

Hip replacement can be a same day surgery. Depends on what both the surgeon and the patient bring to the table. The recovery time for total hips are generally faster than total knees.

I recognize those ice explorer legos from my childhood.