Search results

PLVMB 1/2-inch sliding T-Handle. Finish is nice, and will look great with some WD40 and steel wool. $18.50 shipped, CONUS Payment via PayPal goods and services only. I don't check here often, and don't get alerts. If you want these, email me at [email protected], or call 706) 424-5035

Selling these four PLVMB tools: 15/16 and 1-in double box wrench 11/16 combo wrench 12-inch long 3/8-inch extension. 5-inch long 3/8-inch extension. I don't get alerts here, so if you want these, send me an email at [email protected], or text me at (706) 424-5035 PayPal goods and...

Brand new, never-swung Snap-On dead blow hammer. HBFE56 56oz. $125 shipped. Over $40 lower than Snapon list. Magnetic socket trays. I got them with 3/8 and 1/4 shallow impact sockets in them. $30 shipped for the pair.

Parting out this '80s Sears 2-ton Jack. This is the same as the Craftsman of the era (I stole the front wheel for my Craftsman). Pump is blown. Rest is good. What do you need?

Cleaning out the shop: Vintage PLVMB tools: 1/2-inch sliding T-handle 1/2-drive 13/16 12pt socket 11/16 combo wrench 15/16-1 inch double box 1-1/8 combom 3/8-drive 12-inch extension 3/8-drive 5-inch extension $50 plus the ride. SOLD Snap-on/Blue Point 1/2-inch speed handle 3/8-inch fixed head...

Thank you GJ!!! SOLD

Myford 7 lathe. It's been sitting for a long time, but doesn't appear to have much use and wear. It needs to be gone through and thoroughly cleaned up. I don't have the time and want the space. Parts for these are still available from Myford, and can be found on Ebay relatively easily...

Got this as a spare part with a Myford 7 lathe I picked up several years ago. It's definitely not for the Myford 7; Can anybody help me ID it? I'd like to make it go away, but "For Sale: Random lathe cross-slide" probably won't do well!

Picked up a couple things I probably don't need, buuuuuuttttt.... First is a red bench on wheels... it's a cart. 4ft x 29 inches, with a 1/2-inch lip around the whole perimeter. I'll probably add a shelf on the bottom, and a rubber mat to the top, and it'll be a perfect mobile work cart in my...

I just picked up a Mohawk 1/2-inch impact--it's in like-new condition, and I got it for free. Is this worth keeping around as a back-up, or should I unload it at the next swap meet? (for instance, I wouldn't take up valuable drawer space with a free, redundant HF impact gun). Thanks, -Brad

Found this at a local junk shop. Not sure if it’s an actual anvil, or just an Anvil Shaped Object (meaning cast Chinese junk). It doesn’t ring, but not all real anvils did. It’s probably 50-60 pounds, and $125.

I just picked up a South Bend 10-inch lathe in a cabinet stand. Do lathes have to be leveled with leveling feet? Just double-checking before I go all OverKill on yet another project

Picked this up a few months ago and finally got it put back together and in my shop. I bought it based on cell pics. The shop was cluttered, so I didn’t pay attention to what was on the drill press table... thought it was just stuff sitting on it. Got there to pick it up, it’s been moved to...

ODD LOTS!!! I have too many wrenches. Didn't think it was possible, but my tool boxes (including two travel boxes), show me it is. All these, one price, shipped in a flat rate box. Some may have light owner's marks, but I didn't notice any. Standard Snap-On ½-9/16 long-pattern double box ½...

Gone Gone

Like the title says... I recently acquired a Craftsman 150 drill press, and the on/off switch is not only not original, the installation is kinda hacked. So among other things, I'll need to get that fixed to get it up and running. Anybody have a pic of one so I know what to look for? Thanks!

Last year I scored a vintage Parker vise with the rear swivel jaw. Like every other swivel jaw vise, the pin is seized. What's the best way to get that pin out without destroying it? I have an O/A torch, so I can apply several cycles of heat. But past that, I'm kind of at a loss. (and I...

A couple years ago, the outside part of my HVAC system stopped HVACing... With some tips here, I figured out it was the start/run capacitor and had it fixed in no time, for $25. Came home late this afternoon, and heard the unit humming loudly. Stuck a screwdriver into the grate to spin the...

Dunno if this was a good deal or not, but for $100, I’ll have at least a full set of quality Mac wrenches for my race trailer tool box, added a 1 1/16 combo to my junkyard/road trip box, and some for the Ammo Box tool kit for my ‘62 K10 project. Sockets are 3/8 6pt standard. Three ratcheting...

Is there a really, really good match out there for the crowntop Craftsman hammertone silver paint? I found a three-drawer intermediate box, but it needs to be restored. I'd add it to my dad's original top and bottom boxes, but I want it to match.