Search results

I purchased a used 36' x 12' "Mini Barn" a couple years ago and store a couple cars in it through the PA winters. The PO installed insulation on the walls and ceiling. It has 2x4 walls and they installed R-13 foil faced fiberglass insulation which puts the insulation in direct contact with the...

As I get older it seems that I need a LOT more light to see well. I recently bought a headlight that is nice and bright, but it has the battery pack on the back of the headband. This works fine when I'm standing up, but if I am on the ground, working off of my back, it can get in the way...

I want to modify my oil drain tank so that it will also function as an Oil Extractor. I have an 18 Gallon Steel Drain Tank. It has a large ball valve on the top of it, that the funnel inserts through. In normal use, when emptying the tank you remove the funnel and close the ball valve to seal...

Has anyone done this? If so, what were the results? How long did the tool last?

I have 170 Gallons of air storage capacity(two 80 gallon 2 Stage Compressors connected together plus another 10 gallon AfterCooler tank) and I only run one compressor most of the time. I will only run them both at the same time when Sandblasting. I think both Compressors probably came with the...

Does anyone know of a way to test an Air Compressor to determine how many CFM it is putting out? If so, how?

I have an OLD(Made in 1957) Quincy 325 ROC 4 Compressor that makes a clattering noise. I need help figuring out what is causing the noise. I bought it and due to the noise, I decided to overhaul it and have done pretty much a complete overhaul on it. When I tore it down I found a worn High...

I installed an MHU 75 in my Garage last fall. A Gas Co Tech installed the Propane lines and checked the flue and all other aspects of the installation. After I became aware of issues, he inspected again and verified that the gas pressures are correct. When it was first installed, the unit...