Search results

Could someone with the HF Yukon 9-Drawer toolbox measure the actual width of the cabinet (not including the handle)? Also the depth of the bottom drawers? Looking at possibly using this cabinet for storage in my home office. Hoping it will fit in the space I have, and the bottom drawers are...

Any one have the part numbers for the full extension drawer version of the 26" cabinets? Hate asking as I know there was a thread around with the info, but can't seem to find it. Need to pick one up for my new work office today, so I'm a bit short on research time.

A recent trip to Lowes reminded me about these. Some of their Kobalt boxes have a Kwikset SmartKey lock on them (allowing you to re-key them, or match the key to a house key). Anyone know of a source for the locks? Did some digging and wasn't able to find anything.

Anyone have experience with the OEMTOOLS 6-Drawer cart? Looks like a good alternative to the Sunex 8057 cart I've been looking at for a while. 36" x 21.5" x 40.5" 4 Swivel casters Grip-Latch style drawers Corner Guards 238# Weight (Sunex Lists 214# for the 8057) 750# Capacity (Sunex 600#) Red...

New Year, time for a new thread. Picked up a Flexzilla inflator yesterday for $10.99. Their website shows $14.99 and current amazon prices are ~$30. Made in Taiwan.

Cyber Monday deal from JB Tools. 10% off + Free Streamlight Nano for orders over $99. Playing around this morning their site didn't like the code in all caps, but took CyberMonday2015.

Craftsman "Paintbrush" Ratchet Compatability Confirmation (USA 60T vs. Import 84T) Picked up a pair of the newer Craftsman 84T "Paintbrush" ratchets. I wanted to see if the internals were compatible with the older USA made 60T versions. This would allow rebuilding or upgrading the older...

Trying to find dimensions on the older style VIM Magrail holders (not the TL versions). Anyone have one they could measure quick? Looking mostly for thickness, and length would be nice. Looking to pick up some for specialty & bit sockets (hex, torx, flex, adapters, etc.). Hoping to confirm the...

Poking around Woot and ran across this. Part # and descrption both say 120-Tooth. I'd be tempted if I didn't already have the 84-Tooth version. http://tools.woot.com/offers/gearwrench-1-4-drive-sae-metric-6-point-socket-set-4?ref=cnt_wp_5_1 ~ Carson

I've been doing a fair bit of work from my Lisle Jeepers Creeper lately as I've been tearing down and parting out a car I recently picked up. I kept finding that I'd roll under with a hand full of tools, and end up with tools, bolts, and parts scattered under the car. This usually meant that the...

Looks like Ryobi is coming out with a few nice additions this spring. Ran across this article while looking for info on updated versions of the small radio and 1/2" Anvil Impact I've been considering. Looks like I'll be waiting another month or two...

Looking for another one of the Lowe's Kobalt 2-Drawer carts that were on clearance last year. I'm located in North East, MD 21901. Willing to travel a fair bit(2-3hr). Also make semi frequent trips to Buffalo, NY to visit family thorough central PA and could meet along the way (and shift our...

Looking for the specs for a BluePoint AT200A air ratchet (Torque Range, Free RPM, dB Level). I've found the newer AT200D version, but I'm not sure if they would be the same. Anyone happen to have (or know where to find) a manual sitting around for one? For those curious, I'm putting together a...

Didn't know about this till I went and picked up some wheel bearings I ordered online (playing the discount code game). For orders placed between January 1st and April 29th, 2015 $10 back on $75-$149.99 $25 back on $150-$249.99 $50 back on $250+ Submission Website: AdvMoog500.com Says only...

Noticed this today while browsing around. I remember seeing somewhere that they were offered some time ago. Couldn't find it on their website, but it seems they are back. According to the picture it's a direct bolt on to at least the 5-Drawer Cart. Unfortunately there weren't any out of the box...

Kinda surprised there isn't a new thread yet. So here it is! Home Depot in Newark, DE (#1610) has the Husky 52" 18-Drawer Combo with a "New Lower Price" Tag of $528 on it. Still shows $598 on the website. Didn't have my phone to snag a picture, but will get one next time I'm out that way. ~...

I've had this set up for a while now and figured I should share. I wanted a way to store my 6pc. Ryobi 18V kit that made it easily accessible while working in the shop. My solution was to build a board with "Pegs" that matched the stem on the batteries. Set in the bottom of one of the deep...

Picked up a couple of the plastic 16" Husky tool boxes from Home Depot a little while back for some organizing projects. Started messing with them tonight and noticed something while peeling off the sticker . . . Made in the USA! Nice little surprise, not something I was not expecting. Nice...

Browsing K-mart for some gift ideas and stumbled upon these. $2.99ea at the Newark, DE K-mart. Look to normally be $10-15 quickly looking online. Should hopefully work well with the 5-1/2" 18V Circular Saws & Jigsaws (Father and I both have Ryobi and girlfriends father has Dewalt) ~ Carson

Bored tonight so I though I'd share the little jig I made this afternoon for creating Wrench Coils. Needed to remake a couple coils since I've added onto my wrench sets. I've used the broom handle method before, but can be a pain to hold the wire and get a nice even wrap. So this is my...