Search results

  1. S

    Husky impact socket (leftover from Home Depot holiday promo)

    I saw in a few off local Home Depot the dwindling holiday promo displays. They still have the 1/2” Husky deep impact socket metric for $35, made in China. I was thinking to pick up a set to keep in my truck for emergencies or if I come across an ad hoc project at my parents’ farm. I already...
  2. S

    Lowest vibration reciprocating saw

    Looking for any feedback on a cordless reciprocating saw with a noticeable difference in low vibration. I have the Milwaukee M12 Hackzall and after using it to cut out a lower control arm on my truck (a couple of hours of sawing) , I felt the after effects on my hands and arms. Granted I have...
  3. S

    High flow air 1/4" male plugs

    I have a Prevost PrevoS1 quick disconnect air coupler and Prevost hose combination for use in my home air compressor running a 3/8" hose. I can use regular 1/4" male flow plugs to connect my air impact 1/2 wrench to the PrevoS1 coupler but I just bought the Flexzilla high flow 1/4" male plugs...
  4. S

    SOLD Milwaukee 3/8" stubby impact wrench kit

    Milwaukee 3/8" stubby impact wrench kit, with rubber boot. Comes with a 4.0 battery and 3.0 battery (it originally came with a 2.0 battery but I gave the 2.0 to my parents for their worklight so I just replaced it with a new extra 3.0 I had). Used only twice to test out taking off my truck lug...
  5. S

    Milwaukee M12 underhood light: not all LED nodes light up

    I just bought the Milwaukee M12 underhood light. When turned on, either high or low setting, there are 36 LED lights but only about 27 LEDs light up, grouped in 3s. This happens no matter if it's in high or low mode. I thouhgt all of the 36 LED should light up? Or am I missing something? I was...
  6. S

    FS: Snapon CT9075 1/2" brushless impact

    Snapon CT9075 1/2" driver brushless impact kit (includes tool, 2 18volt batteries (5 amp), and charger.) Red color. Batteries have been charged only once for a full cycle. Everything is as new. I had this since last year and have only used it once to give it several tests on lug nuts on one...
  7. S

    Monster Mobile tools warranty

    I came across a guy who is liquidating his tool truck francise inventory. He has a bunch of Monster Mobile handtools that he is selling for pretty good prices. From my understanding this company ceased to exist due to some lawsuit brought about by Monster Energy drink? Their website is defunct...
  8. S

    Lightweight floor jack for roadtrips

    I have an old 2 ton Astroline, in the familiar orange body with white handle, that's made in Japan. I don't know how much it weighs exactly but it's a bear to lift in and out of the bed of my truck. I do a lot of interstate travel and would like to have a floor jack to throw in the back of my...
  9. S

    Borka Tools Adjustable Torque Driver set

    Borka Tools Adjustable Torque Driver set, model ATD-1085-CSA-MG Per Borka's website, they upgraded this set after 2015. I bought my set in 2015 to install a scope on my rifle. Used only once to do the install. I have a bunch of other bit sets and 1/4" hand torque tools from tool stash, so I...
  10. S

    FS: Snap-on CT761A 3/8" impact

    Sold
  11. S

    FS: Mac Tools RBRT 3/8" 14 piece set

    Sold
  12. S

    Thin-wall 3/8" impact sockets: 21mm

    I got a good line on a 20 volt 3/8" cordless impact that I would like to buy....can't have enough of impacts to have if the deal is too good to pass up. Anyway, with my truck, the lug nuts are factory 21mm size; however, over time they swelled up and now 21.5 mm socket is what will fit (verified...
  13. S

    FS: Snap-on 1/2" flip socket set

    Sold
  14. S

    SP Tools Wrench Sale 4th of July

    I got an email from SP Tools noting their 4th of July wrench sale. Typical Taiwan-made stuff but I have not read any bad reviews on them. https://www.sptoolsusa.com/product-catalogue/spanners-and-multigrips/4th-of-july/
  15. S

    Reciprocating saws: inline vs "hump" style

    for cordless reciprocating saw, do people prefer the inline style vs the saws that have the "hump" ? I have the Milwaukee M12 fuel Hackzall and like it (I had to cut off the back shocks on my truck last month and it worked well) but just thinking if an inline recip saw might come in handy for...
  16. S

    FS: Snap-on 3/8" locking flexhead ratchet

    Excellent condition Snap-on 3/8" locking flex head, part number FHX80A no owner's mark I prefer my Matco locking flexhead ratchets, hence the sale. SOLD
  17. S

    Possible mistake place screw in drywall, looking to buy videoscope for future use

    Well, I think I made a boo boo, where I had inserted an anchor into the drywall of one of my closets at home. Soon after when I went to install the screw into the anchor, I could hear a crackling sound for several seconds....no smoke and no more crackling sound soon after that. The first thing...
  18. S

    Snap-on metric wrench sets (short and standard)

    Two sets of metric wrenches for sale. In excellent condition, no owner marks. Will ship without the trays to lessen shipping costs but if you want the tray, add an additional $10 for each set (prices listed below are for shipped or face to face, which if face to face occurs I won't add on the...
  19. S

    New Snap-on 1/2" metric socket set

    new in package, Snap-on 1/2" metric 10mm to 19mm shallow socket set, chrome, part number 310SWMYA I thought I would have a use for these when using a hand ratchet but I use my impact sockets a lot more. SOLD
  20. S

    Hex sockets: long vs short, ball end vs regular

    I'm looking to buy a set of metric hex sockets. A couple of questions: 1.) Is there a reason to go with long hex socket set vs "regular" size hex socket set? Just trying to understand a situation where putting a regular length hex socket on an extension would not be ideal vs using a long hex...
Top Bottom