Search results

GM Heater Tube Coupler Removal Tool - SOLD ***SOLD*** This GM heater tube coupler removal tool is used to remove the broken off piece of the coupler outlet in the intake manifold used on GM trucks and vans. Just lightly tap the tool into the broken piece and turn it out counter-clockwise with...

Motors Manual Specification Guide 87-93 Domestic & Imported Cars, Light Trucks & Vans Motors Manual Specifications Guide, 1987-1993, 3rd Edition Professional Service Trade Edition Covers Domestic & Imported, Cars, Light Trucks & Vans from 1987-1993 Gives specifications & data for Air...

Sold SOLD I have a set of 2, wheel lock removal sockets. They are "double ended" so they actually fit 4 different size wheel locks. These are made to remove the round style locks found on many (if not most) cars and light trucks. Made to be used with an impact gun and work very well. These...

K-D 205? Battery Pliers K-D 205? battery terminal nut pliers, used for getting even the most corroded nuts off. Still works as it should. Made in USA $6.00 + shipping to the lower 48. Will also combine shipping with my other tools listed here on GJ. Paypal preferred or U.S.P.S. MO. Thanks for...

I have a couple older ratcheting box wrenches, 1 Mac and 1 Craftsman. Mac 1/2" x 9/16", lightly initialed on both sides, mine and someone elses. Still works as it should. No part #, Made in USA $12.50 Shipped to the lower 48 Craftsman 3/8" x 7/16", lightly initialed on both sides with my...

Craftsman Ratcheting Box Wrenches in sizes from: 1/4" x 5/16", Offset, #43361 New, $5.00 5/8" x 3/4", #42164 New, $6.50 15mm x 17mm, Offset, #43665 New, $7.50 Plus Shipping from 48081 or buy them all for $22.00 Shipped to the lower 48. Will also combine shipping with my other tools listed...

Craftsman Metric Ratcheting Box Wrench Set - SOLD SOLD Craftsman Metric Ratcheting Box Wrench Set, #94369, no longer made. These are engraved with the original owners name on every wrench. Older set with very little use on them. Still work as they should. Sizes are: 6mm x 8mm #43691 10mm x...

SOLD - Snap-On S-8672D transmission extension housing (tailshaft) bushing puller. Made for 1 1/2" I.D. bushings, (approx). Older tool with surface rust but still works as it should. $25.00 Shipped to the lower 48 - SOLD I also have a selector (shift) shaft seal puller for transmission use. I...

K-D 2046 Air Conditioning Ratchet Wrench Excellent condition with very little use. Lightly initialed on both sides with my initials. Has 3/16" and 1/4" drive square end and 1/2" and 9/16" SAE drive on the other. This was used to remove and replace caps and open and close the valves on the...

SOLD Description: Blue Point YA502 (same as YA502M except mine are not blue anodized and mine are "Made in USA", not Taiwan) 1/4" air swivel connector. Swivels turn 360° at two points for complete tool maneuverability. Air hoses hang straight to the floor; won’t kink. Anodized aluminum. I...

I have a full set of oil deflectors (16 in all) that were used to deflect the oil when adjusting the valves on older engines where this was needed. It prevented the oil from spraying around and actually worked quite well. The deflector clipped over the end of the rocker arm and the spring...

Kal Equip 2531 Fuel Injector & Harness Tester - SOLD SOLD Gently used Kal Equip 2531 Fuel Injector and Harness Tester This hand tool is used along with a fuel pressure gauge to check fuel injectors and their associated wiring harnesses. Features & Benefits: •Finds clogged or leaking...

SOLD Snap-On S8695 (same as S8695C) socket and a Performance Tool #W83009. Snap-On was lightly engraved on the side but has been ground off, doesn't affect the use of the socket. The performance Tool socket/puller is in very good condition. Snap-On socket #S8695 used to remove the 4 lug DANA...

Snap-On FX1, 1 inch Extension, Lightly engraved with my initials. $8.00 Snap-On FX4, 4 inch Extension, Engraved on the side, also has some scratches (see pic), doesn't hinder the use of the tool. $12.00 Snap-On FXW4, 4 inch Wobble Extension, no markings. Used very little, $14.00 Mac X1EW, 1...

Bonney 11 Piece Metric Shallow Socket Set MT8 - MT18 - Lowered Price SOLD Bonney 11 Piece, 3/8" Drive, 12 Point, Metric Shallow Socket Set, MT8 - MT18, Sizes 8mm, 9, 10, 11, 12, 13, 14, 15, 16, 17 and 18mm. This is an older set of Bonney sockets I purchased used about 16-20+ years ago. I never...

Chicago Pneumatic (CP) 879, 3/8 Inch Right Angle Air Drill with Reverse, Like New, CP 879 Features: Convenient reverse valve for simple directional changes. Rear exhaust directs air away from the workpiece. Teasing throttle for control from start-up thru run down. 1700 RPM free speed, 3/8in.-24...

Magnetic Tool Holder, 13 Inches in length. Has 2 mounting holes used to mount it to a service cart, tool box, ect... Has some light rust on it but still functions as it should. I'm sure if you wanted you could clean it up and paint it to look like new. $15.00 Shipped to the lower 48, will...

3M Surface Conditioning Holders & Disc - Roloc & Velcro Style SOLD 3M #903 Roloc Disc Holder, used to hold 2" Surface Conditioning Discs. Also includes 10 assorted different 3M, 2" surface conditioning discs. 4 "Medium", 3 "Course" surface conditioning and 3 Green course sanding discs, New...

Master Mechanic Cobalt Drill Bits, 3/32” (x4), 7/64” (x4) and 1/8”. • Cobalt Drill Bit Features: • Maximum Speed & Life in Stainless Steel and other hard metals • Pilot Point Tip Design starts on contact and eliminates bit walking • Industrial Strength Cobalt for optimum life & durability in...

Bonney 11 Piece Metric Combo Wrenches - SOLD SOLD I have a full set of older Bonney Metric Combination Wrenches. The pouch isn't in very good condition but the wrenches are in very good+ condition, especially for their age. I bought these probably 16-20+ years ago (used) but never used them...